lkml.org 
[lkml]   [2019]   [Aug]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[RESEND PATCH v6 09/12] thermal: qoriq: Enable all sensors before registering them
Date
Tmu_get_temp will get called as a part of sensor registration via
devm_thermal_zone_of_sensor_register(). To prevent it from retruning
bogus data we need to enable sensor monitoring before that. Looking at
the datasheet (i.MX8MQ RM) there doesn't seem to be any harm in
enabling them all, so, for the sake of simplicity, change the code to
do just that.

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Tested-by: Lucas Stach <l.stach@pengutronix.de>
Cc: Chris Healy <cphealy@gmail.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Eduardo Valentin <edubezval@gmail.com>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Angus Ainslie (Purism) <angus@akkea.ca>
Cc: linux-imx@nxp.com
Cc: linux-pm@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
---
drivers/thermal/qoriq_thermal.c | 23 +++++++++++------------
1 file changed, 11 insertions(+), 12 deletions(-)

diff --git a/drivers/thermal/qoriq_thermal.c b/drivers/thermal/qoriq_thermal.c
index 08167ebe6060..5f964f806187 100644
--- a/drivers/thermal/qoriq_thermal.c
+++ b/drivers/thermal/qoriq_thermal.c
@@ -23,6 +23,7 @@
#define TMR_DISABLE 0x0
#define TMR_ME 0x80000000
#define TMR_ALPF 0x0c000000
+#define TMR_MSITE_ALL GENMASK(15, 0)

#define REGS_TMTMIR 0x008 /* Temperature measurement interval Register */
#define TMTMIR_DEFAULT 0x0000000f
@@ -75,7 +76,10 @@ static const struct thermal_zone_of_device_ops tmu_tz_ops = {
static int qoriq_tmu_register_tmu_zone(struct device *dev,
struct qoriq_tmu_data *qdata)
{
- int id, sites = 0;
+ int id, ret;
+
+ regmap_write(qdata->regmap, REGS_TMR,
+ TMR_MSITE_ALL | TMR_ME | TMR_ALPF);

for (id = 0; id < SITES_MAX; id++) {
struct thermal_zone_device *tzd;
@@ -86,21 +90,16 @@ static int qoriq_tmu_register_tmu_zone(struct device *dev,
tzd = devm_thermal_zone_of_sensor_register(dev, id,
sensor,
&tmu_tz_ops);
- if (IS_ERR(tzd)) {
- if (PTR_ERR(tzd) == -ENODEV)
+ ret = PTR_ERR_OR_ZERO(tzd);
+ if (ret) {
+ if (ret == -ENODEV)
continue;
- else
- return PTR_ERR(tzd);
- }

- sites |= 0x1 << (15 - id);
+ regmap_write(qdata->regmap, REGS_TMR, TMR_DISABLE);
+ return ret;
+ }
}

- /* Enable monitoring */
- if (sites != 0)
- regmap_write(qdata->regmap, REGS_TMR,
- sites | TMR_ME | TMR_ALPF);
-
return 0;
}

--
2.21.0
\
 
 \ /
  Last update: 2019-08-21 03:27    [W:0.130 / U:0.184 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site