lkml.org 
[lkml]   [2019]   [Aug]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
SubjectRe: [PATCH 08/15] riscv: provide native clint access for M-mode
Date
On Tue, 2019-08-13 at 17:47 +0200, Christoph Hellwig wrote:
> RISC-V has the concept of a cpu level interrupt controller. Part of
> it
> is expose as bits in the status registers, and 2 new CSRs per
//is expose/is to expose/

> privilege
> level in the instruction set, but the machanisms to trigger IPIs and
> timer events, as well as reading the actual timer value are not
> specified in the RISC-V spec but usually delegated to a block of MMIO
> registers. This patch adds support for those MMIO registers in the
> timer and IPI code. For now only the SiFive layout also supported by
> a few other implementations is supported, but the code should be
> easily extensible to others in the future.
>
> Signed-off-by: Christoph Hellwig <hch@lst.de>
> ---
> arch/riscv/include/asm/clint.h | 40 +++++++++++++++++++++++++++
> arch/riscv/include/asm/timex.h | 17 ++++++++++++
> arch/riscv/kernel/Makefile | 1 +
> arch/riscv/kernel/clint.c | 45
> +++++++++++++++++++++++++++++++
> arch/riscv/kernel/setup.c | 2 ++
> arch/riscv/kernel/smp.c | 24 +++++++++++++++++
> arch/riscv/kernel/smpboot.c | 3 +++
> drivers/clocksource/timer-riscv.c | 16 ++++++++---
> 8 files changed, 144 insertions(+), 4 deletions(-)
> create mode 100644 arch/riscv/include/asm/clint.h
> create mode 100644 arch/riscv/kernel/clint.c
>
> diff --git a/arch/riscv/include/asm/clint.h
> b/arch/riscv/include/asm/clint.h
> new file mode 100644
> index 000000000000..46d182d9a4db
> --- /dev/null
> +++ b/arch/riscv/include/asm/clint.h
> @@ -0,0 +1,40 @@
> +// SPDX-License-Identifier: GPL-2.0
> +#ifndef _ASM_CLINT_H
> +#define _ASM_CLINT_H 1
> +
> +#include <linux/smp.h>
> +
> +#ifdef CONFIG_M_MODE
> +extern u32 __iomem *clint_ipi_base;
> +extern u64 __iomem *clint_time_val;
> +extern u64 __iomem *clint_time_cmp;
> +
> +void clint_init_boot_cpu(void);
> +
> +static inline void clint_send_ipi(unsigned long hartid)
> +{
> + writel(1, clint_ipi_base + hartid);
> +}
> +
> +static inline void clint_clear_ipi(unsigned long hartid)
> +{
> + writel(0, clint_ipi_base + hartid);
> +}
> +
> +static inline u64 clint_read_timer(void)
> +{
> + return readq_relaxed(clint_time_val);
> +}
> +
> +static inline void clint_set_timer(unsigned long delta)
> +{
> + writeq_relaxed(clint_read_timer() + delta,
> + clint_time_cmp +
> cpuid_to_hartid_map(smp_processor_id()));'

This is not compatible with 32 bit mode. IIRC, timecmp is a 64 bit on
RV32 as well. Here is the implementation in OpenSBI.

https://github.com/riscv/opensbi/blob/master/lib/utils/sys/clint.c#L104

> +}
> +
> +#else
> +#define clint_init_boot_cpu() do { } while (0)
> +#define clint_clear_ipi(hartid) do { } while (0)
> +#endif /* CONFIG_M_MODE */
> +
> +#endif /* _ASM_CLINT_H */
> diff --git a/arch/riscv/include/asm/timex.h
> b/arch/riscv/include/asm/timex.h
> index 6a703ec9d796..bf907997f107 100644
> --- a/arch/riscv/include/asm/timex.h
> +++ b/arch/riscv/include/asm/timex.h
> @@ -10,6 +10,22 @@
>
> typedef unsigned long cycles_t;
>
> +#ifdef CONFIG_M_MODE
> +
> +#include <linux/io-64-nonatomic-lo-hi.h>
> +#include <asm/clint.h>
> +
> +static inline cycles_t get_cycles(void)
> +{
> +#ifdef CONFIG_64BIT
> + return readq_relaxed(clint_time_val);
> +#else
> + return readl_relaxed(clint_time_val);
> +#endif

Same comment as above. Both RV32 & RV64 bit have 64 bit have 64 bit
precission for timer val. You have to read 32 bits at a time and "or"
them to get 64 bit value. Here is the implementation from OpenSBI

https://github.com/riscv/opensbi/blob/master/lib/utils/sys/clint.c#L69

> +}
> +#define get_cycles get_cycles
> +
> +#else /* CONFIG_M_MODE */
> static inline cycles_t get_cycles_inline(void)
> {
> cycles_t n;
> @@ -40,6 +56,7 @@ static inline uint64_t get_cycles64(void)
> return ((u64)hi << 32) | lo;
> }
> #endif
> +#endif /* CONFIG_M_MODE */
>
> #define ARCH_HAS_READ_CURRENT_TIMER
>
> diff --git a/arch/riscv/kernel/Makefile b/arch/riscv/kernel/Makefile
> index 2420d37d96de..f933c04f89db 100644
> --- a/arch/riscv/kernel/Makefile
> +++ b/arch/riscv/kernel/Makefile
> @@ -29,6 +29,7 @@ obj-y += vdso.o
> obj-y += cacheinfo.o
> obj-y += vdso/
>
> +obj-$(CONFIG_M_MODE) += clint.o
> obj-$(CONFIG_FPU) += fpu.o
> obj-$(CONFIG_SMP) += smpboot.o
> obj-$(CONFIG_SMP) += smp.o
> diff --git a/arch/riscv/kernel/clint.c b/arch/riscv/kernel/clint.c
> new file mode 100644
> index 000000000000..15b9e7fa5416
> --- /dev/null
> +++ b/arch/riscv/kernel/clint.c
> @@ -0,0 +1,45 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (c) 2019 Christoph Hellwig.
> + */
> +
> +#include <linux/io.h>
> +#include <linux/of_address.h>
> +#include <linux/types.h>
> +#include <asm/csr.h>
> +#include <asm/irq.h>
> +#include <asm/timex.h>
> +
> +/*
> + * This is the layout used by the SiFive clint, which is also shared
> by the qemu
> + * virt platform, and the Kendryte KD210 at least.
> + */
> +#define CLINT_IPI_OFF 0
> +#define CLINT_TIME_VAL_OFF 0xbff8
> +#define CLINT_TIME_CMP_OFF 0x4000;
> +
> +u32 __iomem *clint_ipi_base;
> +u64 __iomem *clint_time_val;
> +u64 __iomem *clint_time_cmp;
> +
> +void clint_init_boot_cpu(void)
> +{
> + struct device_node *np;
> + void __iomem *base;
> +
> + np = of_find_compatible_node(NULL, NULL, "riscv,clint0");
> + if (!np) {
> + panic("clint not found");
> + return;
> + }
> +
> + base = of_iomap(np, 0);
> + if (!base)
> + panic("could not map CLINT");
> +
> + clint_ipi_base = base + CLINT_IPI_OFF;
> + clint_time_val = base + CLINT_TIME_VAL_OFF;
> + clint_time_cmp = base + CLINT_TIME_CMP_OFF;
> +
> + clint_clear_ipi(boot_cpu_hartid);
> +}
> diff --git a/arch/riscv/kernel/setup.c b/arch/riscv/kernel/setup.c
> index a990a6cb184f..f4ba71b66c73 100644
> --- a/arch/riscv/kernel/setup.c
> +++ b/arch/riscv/kernel/setup.c
> @@ -17,6 +17,7 @@
> #include <linux/sched/task.h>
> #include <linux/swiotlb.h>
>
> +#include <asm/clint.h>
> #include <asm/setup.h>
> #include <asm/sections.h>
> #include <asm/pgtable.h>
> @@ -65,6 +66,7 @@ void __init setup_arch(char **cmdline_p)
> setup_bootmem();
> paging_init();
> unflatten_device_tree();
> + clint_init_boot_cpu();
>
> #ifdef CONFIG_SWIOTLB
> swiotlb_init(1);
> diff --git a/arch/riscv/kernel/smp.c b/arch/riscv/kernel/smp.c
> index 8cd730239613..ee8599a7ca48 100644
> --- a/arch/riscv/kernel/smp.c
> +++ b/arch/riscv/kernel/smp.c
> @@ -13,7 +13,9 @@
> #include <linux/sched.h>
> #include <linux/seq_file.h>
> #include <linux/delay.h>
> +#include <linux/io.h>
>
> +#include <asm/clint.h>
> #include <asm/sbi.h>
> #include <asm/tlbflush.h>
> #include <asm/cacheflush.h>
> @@ -78,6 +80,27 @@ static void ipi_stop(void)
> wait_for_interrupt();
> }
>
> +#ifdef CONFIG_M_MODE
> +static inline void send_ipi_single(int cpu, enum ipi_message_type
> op)
> +{
> + set_bit(op, &ipi_data[cpu].bits);
> + clint_send_ipi(cpuid_to_hartid_map(cpu));
> +}
> +
> +static inline void send_ipi_mask(const struct cpumask *mask,
> + enum ipi_message_type op)
> +{
> + int cpu;
> +
> + for_each_cpu(cpu, mask)
> + send_ipi_single(cpu, op);
> +}
> +
> +static inline void clear_ipi(void)
> +{
> + clint_clear_ipi(cpuid_to_hartid_map(smp_processor_id()));
> +}
> +#else /* CONFIG_M_MODE */
> static void send_ipi_mask(const struct cpumask *mask, enum
> ipi_message_type op)
> {
> int cpuid, hartid;
> @@ -103,6 +126,7 @@ static inline void clear_ipi(void)
> {
> csr_clear(CSR_SIP, SIE_SSIE);
> }
> +#endif /* CONFIG_M_MODE */
>
> void riscv_software_interrupt(void)
> {
> diff --git a/arch/riscv/kernel/smpboot.c
> b/arch/riscv/kernel/smpboot.c
> index 7462a44304fe..1b7678d86ec8 100644
> --- a/arch/riscv/kernel/smpboot.c
> +++ b/arch/riscv/kernel/smpboot.c
> @@ -23,6 +23,7 @@
> #include <linux/of.h>
> #include <linux/sched/task_stack.h>
> #include <linux/sched/mm.h>
> +#include <asm/clint.h>
> #include <asm/irq.h>
> #include <asm/mmu_context.h>
> #include <asm/tlbflush.h>
> @@ -132,6 +133,8 @@ asmlinkage void __init smp_callin(void)
> {
> struct mm_struct *mm = &init_mm;
>
> + clint_clear_ipi(cpuid_to_hartid_map(smp_processor_id()));
> +
> /* All kernel threads share the same mm context. */
> mmgrab(mm);
> current->active_mm = mm;
> diff --git a/drivers/clocksource/timer-riscv.c
> b/drivers/clocksource/timer-riscv.c
> index 3ad2fa52bac9..09f2165bd0a5 100644
> --- a/drivers/clocksource/timer-riscv.c
> +++ b/drivers/clocksource/timer-riscv.c
> @@ -24,12 +24,16 @@
> * operations on the current hart. There is guaranteed to be
> exactly one timer
> * per hart on all RISC-V systems.
> */
> -
> static int riscv_clock_next_event(unsigned long delta,
> struct clock_event_device *ce)
> {
> csr_set(CSR_XIE, XIE_XTIE);
> +
> +#ifdef CONFIG_M_MODE
> + clint_set_timer(delta);
> +#else
> sbi_set_timer(get_cycles64() + delta);
> +#endif
> return 0;
> }
>
> @@ -45,14 +49,18 @@ static DEFINE_PER_CPU(struct clock_event_device,
> riscv_clock_event) = {
> * within one tick of each other, so while this could technically go
> * backwards when hopping between CPUs, practically it won't happen.
> */
> -static unsigned long long riscv_clocksource_rdtime(struct
> clocksource *cs)
> +static u64 riscv_sched_clock(void)
> {
> +#ifdef CONFIG_M_MODE
> + return clint_read_timer();
> +#else
> return get_cycles64();
> +#endif
> }
>
> -static u64 riscv_sched_clock(void)
> +static unsigned long long riscv_clocksource_rdtime(struct
> clocksource *cs)
> {
> - return get_cycles64();
> + return riscv_sched_clock();
> }
>
> static struct clocksource riscv_clocksource = {

--
Regards,
Atish
\
 
 \ /
  Last update: 2019-08-21 02:25    [W:0.290 / U:0.136 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site