lkml.org 
[lkml]   [2019]   [Aug]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 2/3] dt-bindings: Convert Arm Mali Bifrost GPU to DT schema
Date
Convert the Arm Bifrost GPU binding to DT schema format.

Signed-off-by: Rob Herring <robh@kernel.org>
---
.../bindings/gpu/arm,mali-bifrost.txt | 92 --------------
.../bindings/gpu/arm,mali-bifrost.yaml | 115 ++++++++++++++++++
2 files changed, 115 insertions(+), 92 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/gpu/arm,mali-bifrost.txt
create mode 100644 Documentation/devicetree/bindings/gpu/arm,mali-bifrost.yaml

diff --git a/Documentation/devicetree/bindings/gpu/arm,mali-bifrost.txt b/Documentation/devicetree/bindings/gpu/arm,mali-bifrost.txt
deleted file mode 100644
index b8be9dbc68b4..000000000000
--- a/Documentation/devicetree/bindings/gpu/arm,mali-bifrost.txt
+++ /dev/null
@@ -1,92 +0,0 @@
-ARM Mali Bifrost GPU
-====================
-
-Required properties:
-
-- compatible :
- * Since Mali Bifrost GPU model/revision is fully discoverable by reading
- some determined registers, must contain the following:
- + "arm,mali-bifrost"
- * which must be preceded by one of the following vendor specifics:
- + "amlogic,meson-g12a-mali"
-
-- reg : Physical base address of the device and length of the register area.
-
-- interrupts : Contains the three IRQ lines required by Mali Bifrost devices,
- in the following defined order.
-
-- interrupt-names : Contains the names of IRQ resources in this exact defined
- order: "job", "mmu", "gpu".
-
-Optional properties:
-
-- clocks : Phandle to clock for the Mali Bifrost device.
-
-- mali-supply : Phandle to regulator for the Mali device. Refer to
- Documentation/devicetree/bindings/regulator/regulator.txt for details.
-
-- operating-points-v2 : Refer to Documentation/devicetree/bindings/opp/opp.txt
- for details.
-
-- resets : Phandle of the GPU reset line.
-
-Vendor-specific bindings
-------------------------
-
-The Mali GPU is integrated very differently from one SoC to
-another. In order to accommodate those differences, you have the option
-to specify one more vendor-specific compatible, among:
-
-- "amlogic,meson-g12a-mali"
- Required properties:
- - resets : Should contain phandles of :
- + GPU reset line
- + GPU APB glue reset line
-
-Example for a Mali-G31:
-
-gpu@ffa30000 {
- compatible = "amlogic,meson-g12a-mali", "arm,mali-bifrost";
- reg = <0xffe40000 0x10000>;
- interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "job", "mmu", "gpu";
- clocks = <&clk CLKID_MALI>;
- mali-supply = <&vdd_gpu>;
- operating-points-v2 = <&gpu_opp_table>;
- resets = <&reset RESET_DVALIN_CAPB3>, <&reset RESET_DVALIN>;
-};
-
-gpu_opp_table: opp_table0 {
- compatible = "operating-points-v2";
-
- opp@533000000 {
- opp-hz = /bits/ 64 <533000000>;
- opp-microvolt = <1250000>;
- };
- opp@450000000 {
- opp-hz = /bits/ 64 <450000000>;
- opp-microvolt = <1150000>;
- };
- opp@400000000 {
- opp-hz = /bits/ 64 <400000000>;
- opp-microvolt = <1125000>;
- };
- opp@350000000 {
- opp-hz = /bits/ 64 <350000000>;
- opp-microvolt = <1075000>;
- };
- opp@266000000 {
- opp-hz = /bits/ 64 <266000000>;
- opp-microvolt = <1025000>;
- };
- opp@160000000 {
- opp-hz = /bits/ 64 <160000000>;
- opp-microvolt = <925000>;
- };
- opp@100000000 {
- opp-hz = /bits/ 64 <100000000>;
- opp-microvolt = <912500>;
- };
-};
diff --git a/Documentation/devicetree/bindings/gpu/arm,mali-bifrost.yaml b/Documentation/devicetree/bindings/gpu/arm,mali-bifrost.yaml
new file mode 100644
index 000000000000..51f63c9dac46
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpu/arm,mali-bifrost.yaml
@@ -0,0 +1,115 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpu/arm,mali-bifrost.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ARM Mali Bifrost GPU
+
+maintainers:
+ - Rob Herring <robh@kernel.org>
+
+properties:
+ $nodename:
+ pattern: '^gpu@[a-f0-9]+$'
+
+ compatible:
+ items:
+ - enum:
+ - amlogic,meson-g12a-mali
+ - const: arm,mali-bifrost # Mali Bifrost GPU model/revision is fully discoverable
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ items:
+ - description: Job interrupt
+ - description: MMU interrupt
+ - description: GPU interrupt
+
+ interrupt-names:
+ items:
+ - const: job
+ - const: mmu
+ - const: gpu
+
+ clocks:
+ maxItems: 1
+
+ mali-supply:
+ maxItems: 1
+
+ operating-points-v2: true
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - interrupt-names
+
+allOf:
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: amlogic,meson-g12a-mali
+ then:
+ properties:
+ resets:
+ minItems: 2
+ required:
+ - resets
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ gpu@ffe40000 {
+ compatible = "amlogic,meson-g12a-mali", "arm,mali-bifrost";
+ reg = <0xffe40000 0x10000>;
+ interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "job", "mmu", "gpu";
+ clocks = <&clk 1>;
+ mali-supply = <&vdd_gpu>;
+ operating-points-v2 = <&gpu_opp_table>;
+ resets = <&reset 0>, <&reset 1>;
+ };
+
+ gpu_opp_table: opp_table0 {
+ compatible = "operating-points-v2";
+
+ opp@533000000 {
+ opp-hz = /bits/ 64 <533000000>;
+ opp-microvolt = <1250000>;
+ };
+ opp@450000000 {
+ opp-hz = /bits/ 64 <450000000>;
+ opp-microvolt = <1150000>;
+ };
+ opp@400000000 {
+ opp-hz = /bits/ 64 <400000000>;
+ opp-microvolt = <1125000>;
+ };
+ opp@350000000 {
+ opp-hz = /bits/ 64 <350000000>;
+ opp-microvolt = <1075000>;
+ };
+ opp@266000000 {
+ opp-hz = /bits/ 64 <266000000>;
+ opp-microvolt = <1025000>;
+ };
+ opp@160000000 {
+ opp-hz = /bits/ 64 <160000000>;
+ opp-microvolt = <925000>;
+ };
+ opp@100000000 {
+ opp-hz = /bits/ 64 <100000000>;
+ opp-microvolt = <912500>;
+ };
+ };
+
+...
--
2.20.1
\
 
 \ /
  Last update: 2019-08-20 22:01    [W:0.081 / U:0.340 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site