lkml.org 
[lkml]   [2019]   [Aug]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    SubjectRe: [RFC PATCH v2 00/19] KVM RISC-V Support
    From
    Date
    On 02/08/19 09:46, Anup Patel wrote:
    > This series adds initial KVM RISC-V support. Currently, we are able to boot
    > RISC-V 64bit Linux Guests with multiple VCPUs.
    >
    > Few key aspects of KVM RISC-V added by this series are:
    > 1. Minimal possible KVM world-switch which touches only GPRs and few CSRs.
    > 2. Full Guest/VM switch is done via vcpu_get/vcpu_put infrastructure.
    > 3. KVM ONE_REG interface for VCPU register access from user-space.
    > 4. PLIC emulation is done in user-space. In-kernel PLIC emulation, will
    > be added in future.
    > 5. Timer and IPI emuation is done in-kernel.
    > 6. MMU notifiers supported.
    > 7. FP lazy save/restore supported.
    > 8. SBI v0.1 emulation for KVM Guest available.
    >
    > Here's a brief TODO list which we will work upon after this series:
    > 1. Handle trap from unpriv access in reading Guest instruction
    > 2. Handle trap from unpriv access in SBI v0.1 emulation
    > 3. Implement recursive stage2 page table programing
    > 4. SBI v0.2 emulation in-kernel
    > 5. SBI v0.2 hart hotplug emulation in-kernel
    > 6. In-kernel PLIC emulation
    > 7. ..... and more .....
    >
    > This series is based upon KVM pre-patches sent by Atish earlier
    > (https://lkml.org/lkml/2019/7/31/1503) and it can be found in
    > riscv_kvm_v2 branch at:
    > https//github.com/avpatel/linux.git
    >
    > Our work-in-progress KVMTOOL RISC-V port can be found in riscv_v1 branch at:
    > https//github.com/avpatel/kvmtool.git
    >
    > We need OpenSBI with RISC-V hypervisor extension support which can be
    > found in hyp_ext_changes_v1 branch at:
    > https://github.com/riscv/opensbi.git
    >
    > The QEMU RISC-V hypervisor emulation is done by Alistair and is available
    > in riscv-hyp-work.next branch at:
    > https://github.com/alistair23/qemu.git
    >
    > To play around with KVM RISC-V, here are few reference commands:
    > 1) To cross-compile KVMTOOL:
    > $ make lkvm-static
    > 2) To launch RISC-V Host Linux:
    > $ qemu-system-riscv64 -monitor null -cpu rv64,h=true -M virt \
    > -m 512M -display none -serial mon:stdio \
    > -kernel opensbi/build/platform/qemu/virt/firmware/fw_jump.elf \
    > -device loader,file=build-riscv64/arch/riscv/boot/Image,addr=0x80200000 \
    > -initrd ./rootfs_kvm_riscv64.img \
    > -append "root=/dev/ram rw console=ttyS0 earlycon=sbi"
    > 3) To launch RISC-V Guest Linux with 9P rootfs:
    > $ ./apps/lkvm-static run -m 128 -c2 --console serial \
    > -p "console=ttyS0 earlycon=uart8250,mmio,0x3f8" -k ./apps/Image --debug
    > 4) To launch RISC-V Guest Linux with initrd:
    > $ ./apps/lkvm-static run -m 128 -c2 --console serial \
    > -p "console=ttyS0 earlycon=uart8250,mmio,0x3f8" -k ./apps/Image \
    > -i ./apps/rootfs.img --debug

    LGTM apart from the comments I've sent about locking---which was the
    focus of my review this time through---and the bug on reading VSIP).

    Please try to have your GPG key signed by some other Linux maintainers
    so that you can use signed pull requests for RISC-V KVM.

    Paolo

    > Changes since v1:
    > - Fixed compile errors in building KVM RISC-V as module
    > - Removed unused kvm_riscv_halt_guest() and kvm_riscv_resume_guest()
    > - Set KVM_CAP_SYNC_MMU capability only after MMU notifiers are implemented
    > - Made vmid_version as unsigned long instead of atomic
    > - Renamed KVM_REQ_UPDATE_PGTBL to KVM_REQ_UPDATE_HGATP
    > - Renamed kvm_riscv_stage2_update_pgtbl() to kvm_riscv_stage2_update_hgatp()
    > - Configure HIDELEG and HEDELEG in kvm_arch_hardware_enable()
    > - Updated ONE_REG interface for CSR access to user-space
    > - Removed irqs_pending_lock and use atomic bitops instead
    > - Added separate patch for FP ONE_REG interface
    > - Added separate patch for updating MAINTAINERS file
    >
    > Anup Patel (14):
    > KVM: RISC-V: Add KVM_REG_RISCV for ONE_REG interface
    > RISC-V: Add hypervisor extension related CSR defines
    > RISC-V: Add initial skeletal KVM support
    > RISC-V: KVM: Implement VCPU create, init and destroy functions
    > RISC-V: KVM: Implement VCPU interrupts and requests handling
    > RISC-V: KVM: Implement KVM_GET_ONE_REG/KVM_SET_ONE_REG ioctls
    > RISC-V: KVM: Implement VCPU world-switch
    > RISC-V: KVM: Handle MMIO exits for VCPU
    > RISC-V: KVM: Handle WFI exits for VCPU
    > RISC-V: KVM: Implement VMID allocator
    > RISC-V: KVM: Implement stage2 page table programming
    > RISC-V: KVM: Implement MMU notifiers
    > RISC-V: Enable VIRTIO drivers in RV64 and RV32 defconfig
    > RISC-V: KVM: Add MAINTAINERS entry
    >
    > Atish Patra (5):
    > RISC-V: Export few kernel symbols
    > RISC-V: KVM: Add timer functionality
    > RISC-V: KVM: FP lazy save/restore
    > RISC-V: KVM: Implement ONE REG interface for FP registers
    > RISC-V: KVM: Add SBI v0.1 support
    >
    > MAINTAINERS | 10 +
    > arch/riscv/Kconfig | 2 +
    > arch/riscv/Makefile | 2 +
    > arch/riscv/configs/defconfig | 23 +-
    > arch/riscv/configs/rv32_defconfig | 13 +
    > arch/riscv/include/asm/csr.h | 58 ++
    > arch/riscv/include/asm/kvm_host.h | 228 ++++++
    > arch/riscv/include/asm/kvm_vcpu_timer.h | 32 +
    > arch/riscv/include/asm/pgtable-bits.h | 1 +
    > arch/riscv/include/uapi/asm/kvm.h | 98 +++
    > arch/riscv/kernel/asm-offsets.c | 148 ++++
    > arch/riscv/kernel/smp.c | 2 +-
    > arch/riscv/kernel/time.c | 1 +
    > arch/riscv/kvm/Kconfig | 34 +
    > arch/riscv/kvm/Makefile | 14 +
    > arch/riscv/kvm/main.c | 84 +++
    > arch/riscv/kvm/mmu.c | 904 +++++++++++++++++++++++
    > arch/riscv/kvm/tlb.S | 43 ++
    > arch/riscv/kvm/vcpu.c | 936 ++++++++++++++++++++++++
    > arch/riscv/kvm/vcpu_exit.c | 554 ++++++++++++++
    > arch/riscv/kvm/vcpu_sbi.c | 119 +++
    > arch/riscv/kvm/vcpu_switch.S | 368 ++++++++++
    > arch/riscv/kvm/vcpu_timer.c | 106 +++
    > arch/riscv/kvm/vm.c | 86 +++
    > arch/riscv/kvm/vmid.c | 124 ++++
    > drivers/clocksource/timer-riscv.c | 8 +
    > include/clocksource/timer-riscv.h | 16 +
    > include/uapi/linux/kvm.h | 1 +
    > 28 files changed, 4009 insertions(+), 6 deletions(-)
    > create mode 100644 arch/riscv/include/asm/kvm_host.h
    > create mode 100644 arch/riscv/include/asm/kvm_vcpu_timer.h
    > create mode 100644 arch/riscv/include/uapi/asm/kvm.h
    > create mode 100644 arch/riscv/kvm/Kconfig
    > create mode 100644 arch/riscv/kvm/Makefile
    > create mode 100644 arch/riscv/kvm/main.c
    > create mode 100644 arch/riscv/kvm/mmu.c
    > create mode 100644 arch/riscv/kvm/tlb.S
    > create mode 100644 arch/riscv/kvm/vcpu.c
    > create mode 100644 arch/riscv/kvm/vcpu_exit.c
    > create mode 100644 arch/riscv/kvm/vcpu_sbi.c
    > create mode 100644 arch/riscv/kvm/vcpu_switch.S
    > create mode 100644 arch/riscv/kvm/vcpu_timer.c
    > create mode 100644 arch/riscv/kvm/vm.c
    > create mode 100644 arch/riscv/kvm/vmid.c
    > create mode 100644 include/clocksource/timer-riscv.h
    >
    > --
    > 2.17.1
    >

    \
     
     \ /
      Last update: 2019-08-02 11:23    [W:2.713 / U:0.020 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site