lkml.org 
[lkml]   [2019]   [Aug]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [Regression] Commit "ACPI: PM: Allow transitions to D0 to occur in special cases"
On Thu, Aug 01, 2019 at 12:26:51AM +0200, Rafael J. Wysocki wrote:
> On Wednesday, July 31, 2019 11:30:01 PM CEST Bjorn Helgaas wrote:
> > [+cc Thunderbolt folks, see
> > https://lore.kernel.org/r/578BD3F1-B185-471B-A3EB-FF71BA34B822@canonical.com
> > for beginning of thread]
> >
> > On Thu, Aug 01, 2019 at 12:04:29AM +0800, Kai-Heng Feng wrote:
> > > Hi,
> > >
> > > After commit "ACPI: PM: Allow transitions to D0 to occur in special cases”,
> >
> > This is f850a48a0799 ("ACPI: PM: Allow transitions to D0 to occur in
> > special cases").
> >
> > > Thunderbolt on XPS 9380 spews the following when it runtime resumes:
> > > [ 36.136554] pci_raw_set_power_state: 25 callbacks suppressed
> > > [ 36.136558] pcieport 0000:03:00.0: Refused to change power state,
> > > currently in D3
> >
> > We really should be smarter about what we print here, maybe something
> > like the patch below?
> >
> > pci_raw_set_power_state() prints "Refused to change power state" if
> > (in this case) the value of (PCI_PM_CTRL & PCI_PM_CTRL_STATE_MASK) is
> > 0x3. Most likely we got 0xffff from PCI_PM_CTRL because the device is
> > in D3cold. If the device is in D3cold, pci_raw_set_power_state() has
> > no hope of doing anything because it only uses PCI PM config
> > registers, and they're inaccessible in D3cold.

> > diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
> > index 29ed5ec1ac27..63ca963ebff9 100644
> > --- a/drivers/pci/pci.c
> > +++ b/drivers/pci/pci.c
> > @@ -851,6 +852,11 @@ static int pci_raw_set_power_state(struct pci_dev *dev, pci_power_t state)
> > return -EIO;
> >
> > pci_read_config_word(dev, dev->pm_cap + PCI_PM_CTRL, &pmcsr);
> > + if (pmcsr == (u16) ~0) {
>
> Is the "device not accessible" the only case in which we can get all ones from this?
>
> If so, the change will be fine by me.

There are several RsvdP bits in that register, so it's not possible to
read all ones except in error cases. I'll finish up a patch for it.

Bjorn

\
 
 \ /
  Last update: 2019-08-03 00:37    [W:0.063 / U:0.596 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site