lkml.org 
[lkml]   [2019]   [Aug]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 4/5] watchdog: ziirave_wdt: Don't bail out on unexpected timeout value
On Wed, Jul 31, 2019 at 10:42:51AM -0700, Andrey Smirnov wrote:
> Reprogramming bootloader on watchdog MCU will result in reported
> default timeout value of "0". That in turn will be unnecesarily
> rejected by the driver as invalid device (-ENODEV). Simplify probe to
> just read stored timeout value, clamp it to an acceptable range and
> program the value unconditionally to fix the above.
>
> Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
> Cc: Chris Healy <cphealy@gmail.com>
> Cc: Guenter Roeck <linux@roeck-us.net>
> Cc: Rick Ramstetter <rick@anteaterllc.com>
> Cc: linux-watchdog@vger.kernel.org
> Cc: linux-kernel@vger.kernel.org

I have not heard back on the question I had about selecting the minimum
timeout and not a more reasonable default. Since the code itself
is technically correct, marking the patch as

Reviewed-by: Guenter Roeck <linux@roeck-us.net>

Guenter

> ---
> drivers/watchdog/ziirave_wdt.c | 22 +++++++++-------------
> 1 file changed, 9 insertions(+), 13 deletions(-)
>
> diff --git a/drivers/watchdog/ziirave_wdt.c b/drivers/watchdog/ziirave_wdt.c
> index 89ce6982ba53..33c8d2eadada 100644
> --- a/drivers/watchdog/ziirave_wdt.c
> +++ b/drivers/watchdog/ziirave_wdt.c
> @@ -667,22 +667,18 @@ static int ziirave_wdt_probe(struct i2c_client *client,
> return val;
> }
>
> - if (val < ZIIRAVE_TIMEOUT_MIN)
> - return -ENODEV;
> -
> - w_priv->wdd.timeout = val;
> - } else {
> - ret = ziirave_wdt_set_timeout(&w_priv->wdd,
> - w_priv->wdd.timeout);
> - if (ret) {
> - dev_err(&client->dev, "Failed to set timeout\n");
> - return ret;
> - }
> + w_priv->wdd.timeout = clamp(val, ZIIRAVE_TIMEOUT_MIN,
> + ZIIRAVE_TIMEOUT_MAX);
> + }
>
> - dev_info(&client->dev, "Timeout set to %ds\n",
> - w_priv->wdd.timeout);
> + ret = ziirave_wdt_set_timeout(&w_priv->wdd, w_priv->wdd.timeout);
> + if (ret) {
> + dev_err(&client->dev, "Failed to set timeout\n");
> + return ret;
> }
>
> + dev_info(&client->dev, "Timeout set to %ds\n", w_priv->wdd.timeout);
> +
> watchdog_set_nowayout(&w_priv->wdd, nowayout);
>
> i2c_set_clientdata(client, w_priv);
> --
> 2.21.0
>

\
 
 \ /
  Last update: 2019-08-02 22:50    [W:0.248 / U:0.336 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site