lkml.org 
[lkml]   [2019]   [Aug]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH] drivers/amba: add reset control to primecell probe
On Thu, Aug 1, 2019 at 12:44 PM Dinh Nguyen <dinguyen@kernel.org> wrote:
>
> From: Dinh Nguyen <dinh.nguyen@intel.com>
>
> The primecell controller on some SoCs, i.e. SoCFPGA, is held in reset by
> default. Until recently, the DMA controller was brought out of reset by the
> bootloader(i.e. U-Boot). But a recent change in U-Boot, the peripherals that
> are not used are held in reset and are left to Linux to bring them out of
> reset.

You can fix this in the kernel, but any versions before this change
will remain broken. IMO, the u-boot change should be reverted because
it is breaking an ABI (though not a good one).

> Add a mechanism for getting the reset property and de-assert the primecell
> module from reset if found. This is a not a hard fail if the reset property
> is not present in the device tree node, so the driver will continue to probe.

I think this belongs in the AMBA bus code, not the DT code, as that is
where we already have clock control code for similar reasons.

>
> Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
> ---
> drivers/of/platform.c | 14 ++++++++++++++
> 1 file changed, 14 insertions(+)
>
> diff --git a/drivers/of/platform.c b/drivers/of/platform.c
> index 7801e25e6895..d8945705313d 100644
> --- a/drivers/of/platform.c
> +++ b/drivers/of/platform.c
> @@ -21,6 +21,7 @@
> #include <linux/of_irq.h>
> #include <linux/of_platform.h>
> #include <linux/platform_device.h>
> +#include <linux/reset.h>
>
> const struct of_device_id of_default_bus_match_table[] = {
> { .compatible = "simple-bus", },
> @@ -229,6 +230,7 @@ static struct amba_device *of_amba_device_create(struct device_node *node,
> struct amba_device *dev;
> const void *prop;
> int i, ret;
> + struct reset_control *rstc;
>
> pr_debug("Creating amba device %pOF\n", node);
>
> @@ -270,6 +272,18 @@ static struct amba_device *of_amba_device_create(struct device_node *node,
> goto err_free;
> }
>
> + /*
> + * reset control of the primecell block is optional
> + * and will not fail if the reset property is not found.
> + */
> + rstc = of_reset_control_get_exclusive(node, "dma");

'dma' doesn't sound very generic.

> + if (!IS_ERR(rstc)) {
> + reset_control_deassert(rstc);
> + reset_control_put(rstc);
> + } else {
> + pr_debug("amba: reset control not found\n");
> + }
> +
> ret = amba_device_add(dev, &iomem_resource);
> if (ret) {
> pr_err("amba_device_add() failed (%d) for %pOF\n",
> --
> 2.20.0
>

\
 
 \ /
  Last update: 2019-08-02 16:37    [W:0.085 / U:0.332 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site