lkml.org 
[lkml]   [2019]   [Aug]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v2 4/6] dt: bindings: add mt7621-pll dt binding documentation
Hi!

On Sat, Aug 17, 2019 at 11:40 PM Oleksij Rempel <fishor@gmx.net> wrote:

> In provided link [0] the ralink_clk_init function is reading SYSC_REG_CPLL_CLKCFG0 R/W register.
> This register is used to determine clock source, clock freq and CPU or bus clocks.

This register should only be changed by bootloader, not kernel. So
it's read-only in kernel's perspective.

> SYSC_REG_CPLL_CLKCFG1 register is a clock gate controller. It is used to enable or disable clocks.
> Jist wild assumption. All peripheral devices are suing bus clock.

This assumption is incorrect. When this patchset is applied in
OpenWrt, I asked the author why there's still a fixed clock in
mt7621.dtsi, He told me that there's another clock for those unchanged
peripherals and he doesn't have time to write a clock provider for it.
I don't know how many undocumented clocks are there since this piece
of info is missing in datasheet.

>
> IMO - this information is enough to create full blown drivers/clk/mediatek/clk-mt7621.c

And this information isn't enough because the assumption above is incorrect :P

Regards,
Chuanhong Guo

\
 
 \ /
  Last update: 2019-08-17 18:35    [W:0.771 / U:0.032 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site