Messages in this thread Patch in this message | | | From | Lubomir Rintel <> | Subject | [PATCH] clk: tidy up the help tags in Kconfig | Date | Fri, 16 Aug 2019 20:57:16 +0200 |
| |
Sometimes an extraneous "---help---" follows "help". That is probably a copy&paste error stemming from their inconsistent use. Let's just replace them all with "help", removing the extra ones along the way.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> --- drivers/clk/Kconfig | 51 +++++++++++++++++++-------------------------- 1 file changed, 21 insertions(+), 30 deletions(-)
diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig index 801fa1cd03217..0acc1a8590897 100644 --- a/drivers/clk/Kconfig +++ b/drivers/clk/Kconfig @@ -13,7 +13,7 @@ config COMMON_CLK select CLKDEV_LOOKUP select SRCU select RATIONAL - ---help--- + help The common clock framework is a single definition of struct clk, useful across many platforms, as well as an implementation of the clock API in include/linux/clk.h. @@ -26,7 +26,7 @@ menu "Common Clock Framework" config COMMON_CLK_WM831X tristate "Clock driver for WM831x/2x PMICs" depends on MFD_WM831X - ---help--- + help Supports the clocking subsystem of the WM831x/2x series of PMICs from Wolfson Microelectronics. @@ -35,14 +35,14 @@ source "drivers/clk/versatile/Kconfig" config CLK_HSDK bool "PLL Driver for HSDK platform" depends on OF || COMPILE_TEST - ---help--- + help This driver supports the HSDK core, system, ddr, tunnel and hdmi PLLs control. config COMMON_CLK_MAX77686 tristate "Clock driver for Maxim 77620/77686/77802 MFD" depends on MFD_MAX77686 || MFD_MAX77620 || COMPILE_TEST - ---help--- + help This driver supports Maxim 77620/77686/77802 crystal oscillator clock. @@ -55,7 +55,7 @@ config COMMON_CLK_MAX9485 config COMMON_CLK_RK808 tristate "Clock driver for RK805/RK808/RK809/RK817/RK818" depends on MFD_RK808 - ---help--- + help This driver supports RK805, RK809 and RK817, RK808 and RK818 crystal oscillator clock. These multi-function devices have two fixed-rate oscillators, clocked at 32KHz each. Clkout1 is always on, Clkout2 can off by control register. @@ -65,7 +65,7 @@ config COMMON_CLK_HI655X depends on (MFD_HI655X_PMIC || COMPILE_TEST) depends on REGMAP default MFD_HI655X_PMIC - ---help--- + help This driver supports the hi655x PMIC clock. This multi-function device has one fixed-rate oscillator, clocked at 32KHz. @@ -73,7 +73,7 @@ config COMMON_CLK_HI655X config COMMON_CLK_SCMI tristate "Clock driver controlled via SCMI interface" depends on ARM_SCMI_PROTOCOL || COMPILE_TEST - ---help--- + help This driver provides support for clocks that are controlled by firmware that implements the SCMI interface. @@ -83,7 +83,7 @@ config COMMON_CLK_SCMI config COMMON_CLK_SCPI tristate "Clock driver controlled via SCPI interface" depends on ARM_SCPI_PROTOCOL || COMPILE_TEST - ---help--- + help This driver provides support for clocks that are controlled by firmware that implements the SCPI interface. @@ -106,7 +106,7 @@ config COMMON_CLK_SI5351 depends on I2C select REGMAP_I2C select RATIONAL - ---help--- + help This driver supports Silicon Labs 5351A/B/C programmable clock generators. @@ -116,7 +116,6 @@ config COMMON_CLK_SI514 depends on OF select REGMAP_I2C help - ---help--- This driver supports the Silicon Labs 514 programmable clock generator. @@ -125,7 +124,6 @@ config COMMON_CLK_SI544 depends on I2C select REGMAP_I2C help - ---help--- This driver supports the Silicon Labs 544 programmable clock generator. @@ -135,7 +133,6 @@ config COMMON_CLK_SI570 depends on OF select REGMAP_I2C help - ---help--- This driver supports Silicon Labs 570/571/598/599 programmable clock generators. @@ -144,7 +141,7 @@ config COMMON_CLK_CDCE706 depends on I2C select REGMAP_I2C select RATIONAL - ---help--- + help This driver supports TI CDCE706 programmable 3-PLL clock synthesizer. config COMMON_CLK_CDCE925 @@ -153,7 +150,6 @@ config COMMON_CLK_CDCE925 depends on OF select REGMAP_I2C help - ---help--- This driver supports the TI CDCE913/925/937/949 programmable clock synthesizer. Each chip has different number of PLLs and outputs. For example, the CDCE925 contains two PLLs with spread-spectrum @@ -176,7 +172,7 @@ config COMMON_CLK_GEMINI depends on ARCH_GEMINI || COMPILE_TEST select MFD_SYSCON select RESET_CONTROLLER - ---help--- + help This driver supports the SoC clocks on the Cortina Systems Gemini platform, also known as SL3516 or CS3516. @@ -186,7 +182,7 @@ config COMMON_CLK_ASPEED default ARCH_ASPEED select MFD_SYSCON select RESET_CONTROLLER - ---help--- + help This driver supports the SoC clocks on the Aspeed BMC platforms. The G4 and G5 series, including the ast2400 and ast2500, are supported @@ -195,7 +191,7 @@ config COMMON_CLK_ASPEED config COMMON_CLK_S2MPS11 tristate "Clock driver for S2MPS1X/S5M8767 MFD" depends on MFD_SEC_CORE || COMPILE_TEST - ---help--- + help This driver supports S2MPS11/S2MPS14/S5M8767 crystal oscillator clock. These multi-function devices have two (S2MPS14) or three (S2MPS11, S5M8767) fixed-rate oscillators, clocked at 32KHz each. @@ -203,7 +199,7 @@ config COMMON_CLK_S2MPS11 config CLK_TWL6040 tristate "External McPDM functional clock from twl6040" depends on TWL6040_CORE - ---help--- + help Enable the external functional clock support on OMAP4+ platforms for McPDM. McPDM module is using the external bit clock on the McPDM bus as functional clock. @@ -212,14 +208,13 @@ config COMMON_CLK_AXI_CLKGEN tristate "AXI clkgen driver" depends on ARCH_ZYNQ || MICROBLAZE || COMPILE_TEST help - ---help--- Support for the Analog Devices axi-clkgen pcore clock generator for Xilinx FPGAs. It is commonly used in Analog Devices' reference designs. config CLK_QORIQ bool "Clock driver for Freescale QorIQ platforms" depends on (PPC_E500MC || ARM || ARM64 || COMPILE_TEST) && OF - ---help--- + help This adds the clock driver support for Freescale QorIQ platforms using common clock framework. @@ -227,7 +222,7 @@ config COMMON_CLK_XGENE bool "Clock driver for APM XGene SoC" default ARCH_XGENE depends on ARM64 || COMPILE_TEST - ---help--- + help Sypport for the APM X-Gene SoC reference, PLL, and device clocks. config COMMON_CLK_LOCHNAGAR @@ -241,26 +236,26 @@ config COMMON_CLK_NXP def_bool COMMON_CLK && (ARCH_LPC18XX || ARCH_LPC32XX) select REGMAP_MMIO if ARCH_LPC32XX select MFD_SYSCON if ARCH_LPC18XX - ---help--- + help Support for clock providers on NXP platforms. config COMMON_CLK_PALMAS tristate "Clock driver for TI Palmas devices" depends on MFD_PALMAS - ---help--- + help This driver supports TI Palmas devices 32KHz output KG and KG_AUDIO using common clock framework. config COMMON_CLK_PWM tristate "Clock driver for PWMs used as clock outputs" depends on PWM - ---help--- + help Adapter driver so that any PWM output can be (mis)used as clock signal at 50% duty cycle. config COMMON_CLK_PXA def_bool COMMON_CLK && ARCH_PXA - ---help--- + help Support for the Marvell PXA SoC. config COMMON_CLK_PIC32 @@ -270,7 +265,7 @@ config COMMON_CLK_OXNAS bool "Clock driver for the OXNAS SoC Family" depends on ARCH_OXNAS || COMPILE_TEST select MFD_SYSCON - ---help--- + help Support for the OXNAS SoC Family clocks. config COMMON_CLK_VC5 @@ -279,26 +274,22 @@ config COMMON_CLK_VC5 depends on OF select REGMAP_I2C help - ---help--- This driver supports the IDT VersaClock 5 and VersaClock 6 programmable clock generators. config COMMON_CLK_STM32MP157 def_bool COMMON_CLK && MACH_STM32MP157 help - ---help--- Support for stm32mp157 SoC family clocks config COMMON_CLK_STM32F def_bool COMMON_CLK && (MACH_STM32F429 || MACH_STM32F469 || MACH_STM32F746) help - ---help--- Support for stm32f4 and stm32f7 SoC families clocks config COMMON_CLK_STM32H7 def_bool COMMON_CLK && MACH_STM32H743 help - ---help--- Support for stm32h7 SoC family clocks config COMMON_CLK_BD718XX -- 2.21.0
| |