lkml.org 
[lkml]   [2019]   [Aug]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 6/9] rtc: pcf2123: don't use weekday alarm
Date
The week day may not be set properly by userspace. This would result is
missed alarms. Disable alarm matching on weekday.

Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
---
drivers/rtc/rtc-pcf2123.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/rtc/rtc-pcf2123.c b/drivers/rtc/rtc-pcf2123.c
index ba37060f299e..175aa8779623 100644
--- a/drivers/rtc/rtc-pcf2123.c
+++ b/drivers/rtc/rtc-pcf2123.c
@@ -82,7 +82,7 @@
#define OSC_HAS_STOPPED BIT(7) /* Clock has been stopped */

/* PCF2123_REG_ALRM_XX BITS */
-#define ALRM_ENABLE BIT(7) /* MN, HR, DM, or DW alarm enable */
+#define ALRM_DISABLE BIT(7) /* MN, HR, DM, or DW alarm matching */

/* PCF2123_REG_TMR_CLKOUT BITS */
#define CD_TMR_4096KHZ (0) /* 4096 KHz countdown timer */
@@ -286,7 +286,7 @@ static int pcf2123_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alm)
txbuf[0] = bin2bcd(alm->time.tm_min & 0x7F);
txbuf[1] = bin2bcd(alm->time.tm_hour & 0x3F);
txbuf[2] = bin2bcd(alm->time.tm_mday & 0x3F);
- txbuf[3] = bin2bcd(alm->time.tm_wday & 0x07);
+ txbuf[3] = ALRM_DISABLE;

ret = regmap_bulk_write(pcf2123->map, PCF2123_REG_ALRM_MN, txbuf,
sizeof(txbuf));
--
2.21.0
\
 
 \ /
  Last update: 2019-08-14 17:10    [W:0.033 / U:75.908 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site