lkml.org 
[lkml]   [2019]   [Aug]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v4 9/9] Input: add IOC3 serio driver
Hi,

On Fri, 9 Aug 2019 at 12:33, Thomas Bogendoerfer <tbogendoerfer@suse.de> wrote:
>
> This patch adds a platform driver for supporting keyboard and mouse
> interface of SGI IOC3 chips.
>
> Signed-off-by: Thomas Bogendoerfer <tbogendoerfer@suse.de>
> ---
> drivers/input/serio/Kconfig | 10 +++
> drivers/input/serio/Makefile | 1 +
> drivers/input/serio/ioc3kbd.c | 163 ++++++++++++++++++++++++++++++++++++++++++
> 3 files changed, 174 insertions(+)
> create mode 100644 drivers/input/serio/ioc3kbd.c
>
> diff --git a/drivers/input/serio/Kconfig b/drivers/input/serio/Kconfig
> index f3e18f8ef9ca..373a1646019e 100644
> --- a/drivers/input/serio/Kconfig
> +++ b/drivers/input/serio/Kconfig
> @@ -165,6 +165,16 @@ config SERIO_MACEPS2
> To compile this driver as a module, choose M here: the
> module will be called maceps2.
>
> +config SERIO_SGI_IOC3
> + tristate "SGI IOC3 PS/2 controller"
> + depends on SGI_MFD_IOC3
> + help
> + Say Y here if you have an SGI Onyx2, SGI Octane or IOC3 PCI card
> + and you want to attach and use a keyboard, mouse, or both.
> +
> + To compile this driver as a module, choose M here: the
> + module will be called ioc3kbd.
> +
> config SERIO_LIBPS2
> tristate "PS/2 driver library"
> depends on SERIO_I8042 || SERIO_I8042=n
> diff --git a/drivers/input/serio/Makefile b/drivers/input/serio/Makefile
> index 67950a5ccb3f..6d97bad7b844 100644
> --- a/drivers/input/serio/Makefile
> +++ b/drivers/input/serio/Makefile
> @@ -20,6 +20,7 @@ obj-$(CONFIG_HIL_MLC) += hp_sdc_mlc.o hil_mlc.o
> obj-$(CONFIG_SERIO_PCIPS2) += pcips2.o
> obj-$(CONFIG_SERIO_PS2MULT) += ps2mult.o
> obj-$(CONFIG_SERIO_MACEPS2) += maceps2.o
> +obj-$(CONFIG_SERIO_SGI_IOC3) += ioc3kbd.o
> obj-$(CONFIG_SERIO_LIBPS2) += libps2.o
> obj-$(CONFIG_SERIO_RAW) += serio_raw.o
> obj-$(CONFIG_SERIO_AMS_DELTA) += ams_delta_serio.o
> diff --git a/drivers/input/serio/ioc3kbd.c b/drivers/input/serio/ioc3kbd.c
> new file mode 100644
> index 000000000000..6840e3c23fed
> --- /dev/null
> +++ b/drivers/input/serio/ioc3kbd.c
> @@ -0,0 +1,163 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * SGI IOC3 PS/2 controller driver for linux
> + *
> + * Copyright (C) 2019 Thomas Bogendoerfer <tbogendoerfer@suse.de>
> + *
> + * Based on code Copyright (C) 2005 Stanislaw Skowronek <skylark@unaligned.org>
> + * Copyright (C) 2009 Johannes Dickgreber <tanzy@gmx.de>
> + */
> +
> +#include <linux/delay.h>
> +#include <linux/init.h>
> +#include <linux/io.h>
> +#include <linux/serio.h>
> +#include <linux/module.h>
> +#include <linux/platform_device.h>
> +
> +#include <asm/sn/ioc3.h>
> +
> +struct ioc3kbd_data {
> + struct ioc3_serioregs __iomem *regs;
> + struct serio *kbd, *aux;
> + int irq;
> +};
> +
> +static int ioc3kbd_write(struct serio *dev, u8 val)
> +{
> + struct ioc3kbd_data *d = dev->port_data;
> + unsigned long timeout = 0;
> + u32 mask;
> +
> + mask = (dev == d->aux) ? KM_CSR_M_WRT_PEND : KM_CSR_K_WRT_PEND;
> + while ((readl(&d->regs->km_csr) & mask) && (timeout < 1000)) {
> + udelay(100);
> + timeout++;
> + }
> +
> + if (timeout >= 1000)
> + return -ETIMEDOUT;
> +
> + writel(val, dev == d->aux ? &d->regs->m_wd : &d->regs->k_wd);
> +
> + return 0;
> +}
> +
> +static irqreturn_t ioc3kbd_intr(int itq, void *dev_id)
> +{
> + struct ioc3kbd_data *d = dev_id;
> + u32 data_k, data_m;
> +
> + data_k = readl(&d->regs->k_rd);
> + data_m = readl(&d->regs->m_rd);
> +
> + if (data_k & KM_RD_VALID_0)
> + serio_interrupt(d->kbd, (data_k >> KM_RD_DATA_0_SHIFT) & 0xff,
> + 0);
> + if (data_k & KM_RD_VALID_1)
> + serio_interrupt(d->kbd, (data_k >> KM_RD_DATA_1_SHIFT) & 0xff,
> + 0);
> + if (data_k & KM_RD_VALID_2)
> + serio_interrupt(d->kbd, (data_k >> KM_RD_DATA_2_SHIFT) & 0xff,
> + 0);
> + if (data_m & KM_RD_VALID_0)
> + serio_interrupt(d->aux, (data_m >> KM_RD_DATA_0_SHIFT) & 0xff,
> + 0);
> + if (data_m & KM_RD_VALID_1)
> + serio_interrupt(d->aux, (data_m >> KM_RD_DATA_1_SHIFT) & 0xff,
> + 0);
> + if (data_m & KM_RD_VALID_2)
> + serio_interrupt(d->aux, (data_m >> KM_RD_DATA_2_SHIFT) & 0xff,
> + 0);
> +
> + return 0;
> +}
> +
> +static int ioc3kbd_probe(struct platform_device *pdev)
> +{
> + struct ioc3_serioregs __iomem *regs;
> + struct device *dev = &pdev->dev;
> + struct ioc3kbd_data *d;
> + struct serio *sk, *sa;
> + int irq, ret;
> +
> + regs = devm_platform_ioremap_resource(pdev, 0);
> + if (IS_ERR(regs))
> + return PTR_ERR(regs);
> +
> + irq = platform_get_irq(pdev, 0);
> + if (irq < 0)
> + return -ENXIO;
> +
> + d = devm_kzalloc(&pdev->dev, sizeof(*d), GFP_KERNEL);

&pdev->dev => dev

> + if (!d)
> + return -ENOMEM;
> +
> + sk = kzalloc(sizeof(*sk), GFP_KERNEL);

any reason not to devm_kzalloc this as well? Then you won't need to
manually free it in the error cases.

> + if (!sk)
> + return -ENOMEM;
> +
> + sa = kzalloc(sizeof(*sa), GFP_KERNEL);

same here.

> + if (!sa) {
> + kfree(sk);
> + return -ENOMEM;
> + }
> +
> + sk->id.type = SERIO_8042;
> + sk->write = ioc3kbd_write;
> + snprintf(sk->name, sizeof(sk->name), "IOC3 keyboard %d", pdev->id);
> + snprintf(sk->phys, sizeof(sk->phys), "ioc3/serio%dkbd", pdev->id);
> + sk->port_data = d;
> + sk->dev.parent = &pdev->dev;

&pdev->dev => dev

> +
> + sa->id.type = SERIO_8042;
> + sa->write = ioc3kbd_write;
> + snprintf(sa->name, sizeof(sa->name), "IOC3 auxiliary %d", pdev->id);
> + snprintf(sa->phys, sizeof(sa->phys), "ioc3/serio%daux", pdev->id);
> + sa->port_data = d;
> + sa->dev.parent = dev;
> +
> + d->regs = regs;
> + d->kbd = sk;
> + d->aux = sa;
> + d->irq = irq;
> +
> + platform_set_drvdata(pdev, d);
> + serio_register_port(d->kbd);
> + serio_register_port(d->aux);
> +
> + ret = devm_request_irq(&pdev->dev, irq, ioc3kbd_intr, IRQF_SHARED,
> + "ioc3-kbd", d);
> + if (ret) {
> + dev_err(&pdev->dev, "could not request IRQ %d\n", irq);
> + serio_unregister_port(d->kbd);
> + serio_unregister_port(d->aux);
> + kfree(sk);
> + kfree(sa);
> + return ret;
> + }
> + return 0;
> +}
> +
> +static int ioc3kbd_remove(struct platform_device *pdev)
> +{
> + struct ioc3kbd_data *d = platform_get_drvdata(pdev);
> +
> + devm_free_irq(&pdev->dev, d->irq, d);
> + serio_unregister_port(d->kbd);
> + serio_unregister_port(d->aux);
> + return 0;
> +}

and on that topic, won't you need to kfree d->kbd and d->aux here?
Unless you devm_kzalloc'd them.

Alternatively you could also just embed the two serio structs into
ioc3kbd_data, then you only need one allocation instead of three.


Regards

Jonas

\
 
 \ /
  Last update: 2019-08-14 15:21    [W:0.096 / U:20.444 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site