lkml.org 
[lkml]   [2019]   [Aug]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
SubjectRe: kexec on rk3399
Date
On Wednesday, August 14, 2019 3:06:04 PM CEST, Felipe Balbi wrote:
> Hi,
>
> Vicente Bergas <vicencb@gmail.com> writes:
>> On Monday, July 22, 2019 4:31:27 PM CEST, Vicente Bergas wrote:
>>> Hi, i have been running linux on rk3399 booted with kexec fine until 5.2
>>> From 5.2 onwards, there are memory corruption issues as reported here:
>>> http://lkml.iu.edu/hypermail/linux/kernel/1906.2/07211.html
>>> kexec has been identified as the principal reason for the issues.
>>>
>>> It turns out that kexec has never worked reliably on this platform, ...
>>
>> Thank you all for your suggestions on where the issue could be.
>>
>> It seems that it was the USB driver.
>> Now using v5.2.8 booted with kexec from v5.2.8 with a workaround and
>> so far so good. It is being tested on the Sapphire board.
>>
>> The workaround is:
>> --- a/drivers/usb/dwc3/dwc3-of-simple.c
>> +++ b/drivers/usb/dwc3/dwc3-of-simple.c
>> @@ -133,6 +133,13 @@
>> return 0;
>> }
>>
>> +static void dwc3_of_simple_shutdown(struct platform_device *pdev)
>> +{
>> + struct dwc3_of_simple *simple = platform_get_drvdata(pdev);
>> +
>> + reset_control_assert(simple->resets);
>> +}
>> +
>> static int __maybe_unused dwc3_of_simple_runtime_suspend(struct device
>> *dev)
>> {
>> struct dwc3_of_simple *simple = dev_get_drvdata(dev);
>> @@ -190,6 +197,7 @@
>> static struct platform_driver dwc3_of_simple_driver = {
>> .probe = dwc3_of_simple_probe,
>> .remove = dwc3_of_simple_remove,
>> + .shutdown = dwc3_of_simple_shutdown,
>> .driver = {
>> .name = "dwc3-of-simple",
>> .of_match_table = of_dwc3_simple_match,
>>
>> If this patch is OK after review i can resubmit it as a pull request.
>
> not a pull request, just send a patch using git send-email
>
>> Should a similar change be applied to drivers/usb/dwc3/core.c ?
>
> Is it necessary? We haven't had any bug reports regarding that. Also, if
> we have reset control support in the core driver, why do we need it in
> of_simple? Seems like of_simple could just rely on what core does.

the workaround has been tested patching only core.c with
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -1561,6 +1561,13 @@
return 0;
}

+static void dwc3_shutdown(struct platform_device *pdev)
+{
+ struct dwc3 *dwc = platform_get_drvdata(pdev);
+
+ reset_control_assert(dwc->reset);
+}
+
#ifdef CONFIG_PM
static int dwc3_core_init_for_resume(struct dwc3 *dwc)
{
@@ -1866,6 +1873,7 @@
static struct platform_driver dwc3_driver = {
.probe = dwc3_probe,
.remove = dwc3_remove,
+ .shutdown = dwc3_shutdown,
.driver = {
.name = "dwc3",
.of_match_table = of_match_ptr(of_dwc3_match),
and leaving dwc3-of-simple.c as is, the issue persisted.

Regards,
Vicenç.

\
 
 \ /
  Last update: 2019-08-14 15:16    [W:0.045 / U:16.436 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site