lkml.org 
[lkml]   [2019]   [Aug]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: kexec on rk3399
From
Date
On 14/08/2019 13:53, Vicente Bergas wrote:
> On Monday, July 22, 2019 4:31:27 PM CEST, Vicente Bergas wrote:
>> Hi, i have been running linux on rk3399 booted with kexec fine until 5.2
>> From 5.2 onwards, there are memory corruption issues as reported here:
>> http://lkml.iu.edu/hypermail/linux/kernel/1906.2/07211.html
>> kexec has been identified as the principal reason for the issues.
>>
>> It turns out that kexec has never worked reliably on this platform,
>> i was just lucky until recently.
>>
>> Please, can you provide some directions on how to debug the issue?
>
> Thank you all for your suggestions on where the issue could be.
>
> It seems that it was the USB driver.
> Now using v5.2.8 booted with kexec from v5.2.8 with a workaround and
> so far so good. It is being tested on the Sapphire board.
>
> The workaround is:
> --- a/drivers/usb/dwc3/dwc3-of-simple.c
> +++ b/drivers/usb/dwc3/dwc3-of-simple.c
> @@ -133,6 +133,13 @@
>     return 0;
> }
>
> +static void dwc3_of_simple_shutdown(struct platform_device *pdev)
> +{
> +    struct dwc3_of_simple *simple = platform_get_drvdata(pdev);
> +
> +    reset_control_assert(simple->resets);
> +}
> +
> static int __maybe_unused dwc3_of_simple_runtime_suspend(struct device
> *dev)
> {
>     struct dwc3_of_simple    *simple = dev_get_drvdata(dev);
> @@ -190,6 +197,7 @@
> static struct platform_driver dwc3_of_simple_driver = {
>     .probe        = dwc3_of_simple_probe,
>     .remove        = dwc3_of_simple_remove,
> +    .shutdown    = dwc3_of_simple_shutdown,
>     .driver        = {
>         .name    = "dwc3-of-simple",
>         .of_match_table = of_dwc3_simple_match,
>
> If this patch is OK after review i can resubmit it as a pull request.
> Should a similar change be applied to drivers/usb/dwc3/core.c ?

This particular change looks like it's implicitly specific to RK3399,
which wouldn't be ideal. Presumably if the core dwc3 driver implemented
shutdown correctly (echoing parts of dwc3_remove(), I guess) then the
glue layers shouldn't need anything special anyway.

Robin.

\
 
 \ /
  Last update: 2019-08-14 15:13    [W:0.040 / U:48.744 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site