lkml.org 
[lkml]   [2019]   [Aug]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
SubjectRe: kexec on rk3399
Date
On Monday, July 22, 2019 4:31:27 PM CEST, Vicente Bergas wrote:
> Hi, i have been running linux on rk3399 booted with kexec fine until 5.2
> From 5.2 onwards, there are memory corruption issues as reported here:
> http://lkml.iu.edu/hypermail/linux/kernel/1906.2/07211.html
> kexec has been identified as the principal reason for the issues.
>
> It turns out that kexec has never worked reliably on this platform,
> i was just lucky until recently.
>
> Please, can you provide some directions on how to debug the issue?

Thank you all for your suggestions on where the issue could be.

It seems that it was the USB driver.
Now using v5.2.8 booted with kexec from v5.2.8 with a workaround and
so far so good. It is being tested on the Sapphire board.

The workaround is:
--- a/drivers/usb/dwc3/dwc3-of-simple.c
+++ b/drivers/usb/dwc3/dwc3-of-simple.c
@@ -133,6 +133,13 @@
return 0;
}

+static void dwc3_of_simple_shutdown(struct platform_device *pdev)
+{
+ struct dwc3_of_simple *simple = platform_get_drvdata(pdev);
+
+ reset_control_assert(simple->resets);
+}
+
static int __maybe_unused dwc3_of_simple_runtime_suspend(struct device
*dev)
{
struct dwc3_of_simple *simple = dev_get_drvdata(dev);
@@ -190,6 +197,7 @@
static struct platform_driver dwc3_of_simple_driver = {
.probe = dwc3_of_simple_probe,
.remove = dwc3_of_simple_remove,
+ .shutdown = dwc3_of_simple_shutdown,
.driver = {
.name = "dwc3-of-simple",
.of_match_table = of_dwc3_simple_match,
If this patch is OK after review i can resubmit it as a pull request.
Should a similar change be applied to drivers/usb/dwc3/core.c ?

Regards,
Vicenç.

\
 
 \ /
  Last update: 2019-08-14 14:54    [W:0.085 / U:0.532 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site