lkml.org 
[lkml]   [2019]   [Aug]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v3 0/6] Add support of New Amlogic temperature sensor for G12 SoCs
From
Date
On 6 Aug 2019, at 5:05 pm, Guillaume La Roque <glaroque@baylibre.com> wrote:
>
> This patchs series add support of New Amlogic temperature sensor and minimal
> thermal zone for SEI510 and ODROID-N2 boards.
>
> First implementation was doing on IIO[1] but after comments i move on thermal framework.
> Formulas and calibration values come from amlogic.
>
> Changes since v2:
> - fix yaml documention
> - remove unneeded status variable for temperature-sensor node
> - rework driver after Martin review
> - add some information in commit message
>
> Changes since v1:
> - fix enum vs const in documentation
> - fix error with thermal-sensor-cells value set to 1 instead of 0
> - add some dependencies needed to add cooling-maps
>
> Dependencies :
> - patch 3,4 & 5: depends on Neil's patch and series :
> - missing dwc2 phy-names[2]
> - patchsets to add DVFS on G12a[3] which have deps on [4] and [5]
>
> [1] https://lore.kernel.org/linux-amlogic/20190604144714.2009-1-glaroque@baylibre.com/
> [2] https://lore.kernel.org/linux-amlogic/20190625123647.26117-1-narmstrong@baylibre.com/
> [3] https://lore.kernel.org/linux-amlogic/20190729132622.7566-1-narmstrong@baylibre.com/
> [4] https://lore.kernel.org/linux-amlogic/20190731084019.8451-5-narmstrong@baylibre.com/
> [5] https://lore.kernel.org/linux-amlogic/20190729132622.7566-3-narmstrong@baylibre.com/
>
> Guillaume La Roque (6):
> dt-bindings: thermal: Add DT bindings documentation for Amlogic
> Thermal
> thermal: amlogic: Add thermal driver to support G12 SoCs
> arm64: dts: amlogic: g12: add temperature sensor
> arm64: dts: meson: sei510: Add minimal thermal zone
> arm64: dts: amlogic: odroid-n2: add minimal thermal zone
> MAINTAINERS: add entry for Amlogic Thermal driver

Tested-by: Christian Hewitt <christianshewitt@gmail.com>

I’ve tested this series with Odroid N2 and Khadas VIM3, X96-Max. Patches to add
support for VIM3/X96-max will be submitted once the driver is merged.

VIM3:~ # dmesg | grep thermal
[ 0.046375] thermal_sys: Registered thermal governor 'step_wise'

VIM3:~ # cat /sys/devices/virtual/thermal/thermal_zone0/temp
51300

VIM3:~ # cat /sys/devices/virtual/thermal/thermal_zone1/temp
52800

Christian
\
 
 \ /
  Last update: 2019-08-14 14:26    [W:0.074 / U:25.496 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site