lkml.org 
[lkml]   [2019]   [Aug]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 1/2] mfd: madera: Update DT binding document to support clock supplies
Date
Add the 3 input clock sources for the chip into the device tree binding
document.

Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
---

No changes since v1.

Thanks,
Charles

Documentation/devicetree/bindings/mfd/madera.txt | 8 ++++++++
1 file changed, 8 insertions(+)

diff --git a/Documentation/devicetree/bindings/mfd/madera.txt b/Documentation/devicetree/bindings/mfd/madera.txt
index cad0f28005027..47e2b8bc60519 100644
--- a/Documentation/devicetree/bindings/mfd/madera.txt
+++ b/Documentation/devicetree/bindings/mfd/madera.txt
@@ -67,6 +67,14 @@ Optional properties:
As defined in bindings/gpio.txt.
Although optional, it is strongly recommended to use a hardware reset

+ - clocks: Should reference the clocks supplied on MCLK1, MCLK2 and MCLK3
+ - clock-names: May contain up to three strings:
+ "mclk1" for the clock supplied on MCLK1, recommended to be a high
+ quality audio reference clock
+ "mclk2" for the clock supplied on MCLK2, required to be an always on
+ 32k clock
+ "mclk3" for the clock supplied on MCLK3
+
- MICBIASx : Initial data for the MICBIAS regulators, as covered in
Documentation/devicetree/bindings/regulator/regulator.txt.
One for each MICBIAS generator (MICBIAS1, MICBIAS2, ...)
--
2.11.0
\
 
 \ /
  Last update: 2019-08-14 11:22    [W:0.021 / U:2.096 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site