lkml.org 
[lkml]   [2019]   [Aug]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
SubjectRe: [linux-sunxi] [PATCH v5 12/15] ASoC: sun4i-i2s: Add multi-lane functionality
Date
Hi!

Dne sreda, 14. avgust 2019 ob 08:08:51 CEST je codekipper@gmail.com
napisal(a):
> From: Marcus Cooper <codekipper@gmail.com>
>
> The i2s block supports multi-lane i2s output however this functionality
> is only possible in earlier SoCs where the pins are exposed and for
> the i2s block used for HDMI audio on the later SoCs.
>
> To enable this functionality, an optional property has been added to
> the bindings.
>
> Signed-off-by: Marcus Cooper <codekipper@gmail.com>
> ---
> sound/soc/sunxi/sun4i-i2s.c | 28 +++++++++++++++++++++++++---
> 1 file changed, 25 insertions(+), 3 deletions(-)
>
> diff --git a/sound/soc/sunxi/sun4i-i2s.c b/sound/soc/sunxi/sun4i-i2s.c
> index a8d98696fe7c..a020c3b372a8 100644
> --- a/sound/soc/sunxi/sun4i-i2s.c
> +++ b/sound/soc/sunxi/sun4i-i2s.c
> @@ -23,7 +23,7 @@
>
> #define SUN4I_I2S_CTRL_REG 0x00
> #define SUN4I_I2S_CTRL_SDO_EN_MASK GENMASK(11, 8)
> -#define SUN4I_I2S_CTRL_SDO_EN(sdo) BIT(8 +
(sdo))
> +#define SUN4I_I2S_CTRL_SDO_EN(lines) (((1 << lines) - 1)
<< 8)
> #define SUN4I_I2S_CTRL_MODE_MASK BIT(5)
> #define SUN4I_I2S_CTRL_MODE_SLAVE (1 << 5)
> #define SUN4I_I2S_CTRL_MODE_MASTER (0 << 5)
> @@ -614,6 +614,7 @@ static int sun4i_i2s_hw_params(struct snd_pcm_substream
> *substream, struct sun4i_i2s *i2s = snd_soc_dai_get_drvdata(dai);
> int sr, wss, channels;
> u32 width;
> + int lines;
>
> channels = params_channels(params);
> if (channels != 2) {
> @@ -622,6 +623,13 @@ static int sun4i_i2s_hw_params(struct snd_pcm_substream
> *substream, return -EINVAL;
> }
>
> + lines = (channels + 1) / 2;
> +
> + /* Enable the required output lines */
> + regmap_update_bits(i2s->regmap, SUN4I_I2S_CTRL_REG,
> + SUN4I_I2S_CTRL_SDO_EN_MASK,
> + SUN4I_I2S_CTRL_SDO_EN(lines));

As Maxime said before, this doesn't work for TDM. Maybe we can skip this for
now, until we agree on method how to describe channel allocation?

> +
> if (i2s->variant->has_chcfg) {
> regmap_update_bits(i2s->regmap, SUN8I_I2S_CHAN_CFG_REG,
>
SUN8I_I2S_CHAN_CFG_TX_SLOT_NUM_MASK,
> @@ -1389,9 +1397,10 @@ static int sun4i_i2s_init_regmap_fields(struct device
> *dev, static int sun4i_i2s_probe(struct platform_device *pdev)
> {
> struct sun4i_i2s *i2s;
> + struct snd_soc_dai_driver *soc_dai;
> struct resource *res;
> void __iomem *regs;
> - int irq, ret;
> + int irq, ret, val;
>
> i2s = devm_kzalloc(&pdev->dev, sizeof(*i2s), GFP_KERNEL);
> if (!i2s)
> @@ -1456,6 +1465,19 @@ static int sun4i_i2s_probe(struct platform_device
> *pdev) i2s->capture_dma_data.addr = res->start + SUN4I_I2S_FIFO_RX_REG;
> i2s->capture_dma_data.maxburst = 8;
>
> + soc_dai = devm_kmemdup(&pdev->dev, &sun4i_i2s_dai,
> + sizeof(*soc_dai), GFP_KERNEL);
> + if (!soc_dai) {
> + ret = -ENOMEM;
> + goto err_pm_disable;
> + }
> +
> + if (!of_property_read_u32(pdev->dev.of_node,
> + "allwinner,playback-channels",
&val)) {
> + if (val >= 2 && val <= 8)
> + soc_dai->playback.channels_max = val;
> + }
> +

Rather than inventing new DT properties, I would rather have multiple
snd_soc_dai_driver structures, depending on capabilities of that particular
I2S block. That way we avoid some boilerplate code as can be seen here and
it's IMO more transparent.

In this case, I would make another snd_soc_dai_driver struct for H3, which has
channel_max property set to 8 and from patch 14, additional supported formats.

Best regards,
Jernej

> pm_runtime_enable(&pdev->dev);
> if (!pm_runtime_enabled(&pdev->dev)) {
> ret = sun4i_i2s_runtime_resume(&pdev->dev);
> @@ -1465,7 +1487,7 @@ static int sun4i_i2s_probe(struct platform_device
> *pdev)
>
> ret = devm_snd_soc_register_component(&pdev->dev,
>
&sun4i_i2s_component,
> - &sun4i_i2s_dai,
1);
> + soc_dai, 1);
> if (ret) {
> dev_err(&pdev->dev, "Could not register DAI\n");
> goto err_suspend;




\
 
 \ /
  Last update: 2019-08-14 10:28    [W:0.087 / U:7.876 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site