lkml.org 
[lkml]   [2019]   [Aug]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 2/2] dt-bindings: regulator: act8865 regulator modes and suspend states
Date
Add documentation for act8865 regulator modes and suspend states.
Add active-semi,8865-regulator.h file for device tree binding constants
for act8865 regulators.

Signed-off-by: Raag Jadav <raagjadav@gmail.com>
---
.../bindings/regulator/act8865-regulator.txt | 27 +++++++++++++++++++--
.../regulator/active-semi,8865-regulator.h | 28 ++++++++++++++++++++++
2 files changed, 53 insertions(+), 2 deletions(-)
create mode 100644 include/dt-bindings/regulator/active-semi,8865-regulator.h

diff --git a/Documentation/devicetree/bindings/regulator/act8865-regulator.txt b/Documentation/devicetree/bindings/regulator/act8865-regulator.txt
index 3ae9f10..b9f58e4 100644
--- a/Documentation/devicetree/bindings/regulator/act8865-regulator.txt
+++ b/Documentation/devicetree/bindings/regulator/act8865-regulator.txt
@@ -34,6 +34,9 @@ Optional input supply properties:
- inl67-supply: The input supply for LDO_REG3 and LDO_REG4

Any standard regulator properties can be used to configure the single regulator.
+regulator-initial-mode, regulator-allowed-modes and regulator-mode could be specified
+for act8865 using mode values from dt-bindings/regulator/active-semi,8865-regulator.h
+file.

The valid names for regulators are:
- for act8846:
@@ -47,6 +50,8 @@ The valid names for regulators are:
Example:
--------

+#include <dt-bindings/regulator/active-semi,8865-regulator.h>
+
i2c1: i2c@f0018000 {
pmic: act8865@5b {
compatible = "active-semi,act8865";
@@ -65,9 +70,19 @@ Example:
regulator-name = "VCC_1V2";
regulator-min-microvolt = <1100000>;
regulator-max-microvolt = <1300000>;
- regulator-suspend-mem-microvolt = <1150000>;
- regulator-suspend-standby-microvolt = <1150000>;
regulator-always-on;
+
+ regulator-allowed-modes = <ACT8865_REGULATOR_MODE_FIXED>,
+ <ACT8865_REGULATOR_MODE_LOWPOWER>;
+ regulator-initial-mode = <ACT8865_REGULATOR_MODE_FIXED>;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-min-microvolt = <1150000>;
+ regulator-suspend-max-microvolt = <1150000>;
+ regulator-changeable-in-suspend;
+ regulator-mode = <ACT8865_REGULATOR_MODE_LOWPOWER>;
+ };
};

vcc_3v3_reg: DCDC_REG3 {
@@ -82,6 +97,14 @@ Example:
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
+
+ regulator-allowed-modes = <ACT8865_REGULATOR_MODE_NORMAL>,
+ <ACT8865_REGULATOR_MODE_LOWPOWER>;
+ regulator-initial-mode = <ACT8865_REGULATOR_MODE_NORMAL>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
};

vddfuse_reg: LDO_REG2 {
diff --git a/include/dt-bindings/regulator/active-semi,8865-regulator.h b/include/dt-bindings/regulator/active-semi,8865-regulator.h
new file mode 100644
index 0000000..15473db
--- /dev/null
+++ b/include/dt-bindings/regulator/active-semi,8865-regulator.h
@@ -0,0 +1,28 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Device Tree binding constants for the ACT8865 PMIC regulators
+ */
+
+#ifndef _DT_BINDINGS_REGULATOR_ACT8865_H
+#define _DT_BINDINGS_REGULATOR_ACT8865_H
+
+/*
+ * These constants should be used to specify regulator modes in device tree for
+ * ACT8865 regulators as follows:
+ * ACT8865_REGULATOR_MODE_FIXED: It is specific to DCDC regulators and it
+ * specifies the usage of fixed-frequency
+ * PWM.
+ *
+ * ACT8865_REGULATOR_MODE_NORMAL: It is specific to LDO regulators and it
+ * specifies the usage of normal mode.
+ *
+ * ACT8865_REGULATOR_MODE_LOWPOWER: For DCDC and LDO regulators; it specify
+ * the usage of proprietary power-saving
+ * mode.
+ */
+
+#define ACT8865_REGULATOR_MODE_FIXED 1
+#define ACT8865_REGULATOR_MODE_NORMAL 2
+#define ACT8865_REGULATOR_MODE_LOWPOWER 3
+
+#endif
--
2.7.4
\
 
 \ /
  Last update: 2019-08-13 20:35    [W:0.049 / U:4.708 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site