lkml.org 
[lkml]   [2019]   [Aug]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 12/15] riscv: use the correct interrupt levels for M-mode
Date
The numerical levels for External/Timer/Software interrupts differ
between S-mode and M-mode.

Signed-off-by: Christoph Hellwig <hch@lst.de>
---
arch/riscv/kernel/irq.c | 12 +++++++++---
1 file changed, 9 insertions(+), 3 deletions(-)

diff --git a/arch/riscv/kernel/irq.c b/arch/riscv/kernel/irq.c
index 804ff70bb853..9566aabbe50b 100644
--- a/arch/riscv/kernel/irq.c
+++ b/arch/riscv/kernel/irq.c
@@ -14,9 +14,15 @@
/*
* Possible interrupt causes:
*/
-#define INTERRUPT_CAUSE_SOFTWARE IRQ_S_SOFT
-#define INTERRUPT_CAUSE_TIMER IRQ_S_TIMER
-#define INTERRUPT_CAUSE_EXTERNAL IRQ_S_EXT
+#ifdef CONFIG_M_MODE
+# define INTERRUPT_CAUSE_SOFTWARE IRQ_M_SOFT
+# define INTERRUPT_CAUSE_TIMER IRQ_M_TIMER
+# define INTERRUPT_CAUSE_EXTERNAL IRQ_M_EXT
+#else
+# define INTERRUPT_CAUSE_SOFTWARE IRQ_S_SOFT
+# define INTERRUPT_CAUSE_TIMER IRQ_S_TIMER
+# define INTERRUPT_CAUSE_EXTERNAL IRQ_S_EXT
+#endif /* CONFIG_M_MODE */

int arch_show_interrupts(struct seq_file *p, int prec)
{
--
2.20.1
\
 
 \ /
  Last update: 2019-08-13 17:56    [W:0.223 / U:48.840 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site