lkml.org 
[lkml]   [2019]   [Aug]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v4] mfd: Add support for Merrifield Basin Cove PMIC
On Mon, Aug 12, 2019 at 10:53:38AM +0100, Lee Jones wrote:
> On Thu, 01 Aug 2019, Andy Shevchenko wrote:
>
> > Add an MFD driver for Intel Merrifield Basin Cove PMIC.
> >
> > Firmware on the platforms which are using Basin Cove PMIC is "smarter"
> > than on the rest supported by vanilla kernel. It handles first level
> > of interrupt itself, while others do it on OS level.
> >
> > The driver is done in the same way as the rest of Intel PMIC MFD drivers
> > in the kernel to support the initial design. The design allows to use
> > one driver among few PMICs without knowing implementation details of
> > the each hardware version or generation.
> >
> > Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
> > ---
> > v4: elaborate in the commit message the design choice
> > drivers/mfd/Kconfig | 11 ++
> > drivers/mfd/Makefile | 1 +
> > drivers/mfd/intel_soc_pmic_mrfld.c | 157 +++++++++++++++++++++++
> > include/linux/mfd/intel_soc_pmic_mrfld.h | 81 ++++++++++++
> > 4 files changed, 250 insertions(+)
> > create mode 100644 drivers/mfd/intel_soc_pmic_mrfld.c
> > create mode 100644 include/linux/mfd/intel_soc_pmic_mrfld.h
> >
> > diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
> > index f129f9678940..adf178ad5e7b 100644
> > --- a/drivers/mfd/Kconfig
> > +++ b/drivers/mfd/Kconfig
> > @@ -597,6 +597,17 @@ config INTEL_SOC_PMIC_CHTDC_TI
> > Select this option for supporting Dollar Cove (TI version) PMIC
> > device that is found on some Intel Cherry Trail systems.
> >
> > +config INTEL_SOC_PMIC_MRFLD
> > + tristate "Support for Intel Merrifield Basin Cove PMIC"
> > + depends on GPIOLIB
> > + depends on ACPI
> > + depends on INTEL_SCU_IPC
> > + select MFD_CORE
> > + select REGMAP_IRQ
> > + help
> > + Select this option for supporting Basin Cove PMIC device
> > + that is found on Intel Merrifield systems.
> > +
> > config MFD_INTEL_LPSS
> > tristate
> > select COMMON_CLK
> > diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
> > index f026ada68f6a..637ecf6b12de 100644
> > --- a/drivers/mfd/Makefile
> > +++ b/drivers/mfd/Makefile
> > @@ -241,6 +241,7 @@ obj-$(CONFIG_INTEL_SOC_PMIC) += intel-soc-pmic.o
> > obj-$(CONFIG_INTEL_SOC_PMIC_BXTWC) += intel_soc_pmic_bxtwc.o
> > obj-$(CONFIG_INTEL_SOC_PMIC_CHTWC) += intel_soc_pmic_chtwc.o
> > obj-$(CONFIG_INTEL_SOC_PMIC_CHTDC_TI) += intel_soc_pmic_chtdc_ti.o
> > +obj-$(CONFIG_INTEL_SOC_PMIC_MRFLD) += intel_soc_pmic_mrfld.o
> > obj-$(CONFIG_MFD_MT6397) += mt6397-core.o
> >
> > obj-$(CONFIG_MFD_ALTERA_A10SR) += altera-a10sr.o
> > diff --git a/drivers/mfd/intel_soc_pmic_mrfld.c b/drivers/mfd/intel_soc_pmic_mrfld.c
> > new file mode 100644
> > index 000000000000..26a1551c5faf
> > --- /dev/null
> > +++ b/drivers/mfd/intel_soc_pmic_mrfld.c
> > @@ -0,0 +1,157 @@
> > +// SPDX-License-Identifier: GPL-2.0
> > +/*
> > + * Device access for Basin Cove PMIC
> > + *
> > + * Copyright (c) 2019, Intel Corporation.
> > + * Author: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
> > + */
> > +
> > +#include <linux/acpi.h>
> > +#include <linux/interrupt.h>
> > +#include <linux/mfd/core.h>
> > +#include <linux/mfd/intel_soc_pmic.h>
> > +#include <linux/mfd/intel_soc_pmic_mrfld.h>
> > +#include <linux/module.h>
> > +#include <linux/platform_device.h>
> > +#include <linux/regmap.h>
> > +
> > +#include <asm/intel_scu_ipc.h>
> > +
> > +/*
> > + * Level 2 IRQs
> > + *
> > + * Firmware on the systems with Basin Cove PMIC services Level 1 IRQs
> > + * without an assistance. Thus, each of the Level 1 IRQ is represented
> > + * as a separate RTE in IOAPIC.
> > + */
> > +static struct resource irq_level2_resources[] = {
> > + DEFINE_RES_IRQ(0), /* power button */
> > + DEFINE_RES_IRQ(0), /* TMU */
> > + DEFINE_RES_IRQ(0), /* thermal */
> > + DEFINE_RES_IRQ(0), /* BCU */
> > + DEFINE_RES_IRQ(0), /* ADC */
> > + DEFINE_RES_IRQ(0), /* charger */
> > + DEFINE_RES_IRQ(0), /* GPIO */
> > +};
> > +
> > +static const struct mfd_cell bcove_dev[] = {
> > + {
> > + .name = "mrfld_bcove_pwrbtn",
> > + .num_resources = 1,
> > + .resources = &irq_level2_resources[0],
> > + }, {
> > + .name = "mrfld_bcove_tmu",
> > + .num_resources = 1,
> > + .resources = &irq_level2_resources[1],
> > + }, {
> > + .name = "mrfld_bcove_thermal",
> > + .num_resources = 1,
> > + .resources = &irq_level2_resources[2],
> > + }, {
> > + .name = "mrfld_bcove_bcu",
> > + .num_resources = 1,
> > + .resources = &irq_level2_resources[3],
> > + }, {
> > + .name = "mrfld_bcove_adc",
> > + .num_resources = 1,
> > + .resources = &irq_level2_resources[4],
> > + }, {
> > + .name = "mrfld_bcove_charger",
> > + .num_resources = 1,
> > + .resources = &irq_level2_resources[5],
> > + }, {
> > + .name = "mrfld_bcove_pwrsrc",
> > + .num_resources = 1,
> > + .resources = &irq_level2_resources[5],
> > + }, {
> > + .name = "mrfld_bcove_gpio",
> > + .num_resources = 1,
> > + .resources = &irq_level2_resources[6],
> > + },
> > + { .name = "mrfld_bcove_region", },
> > +};
> > +
> > +static int bcove_ipc_byte_reg_read(void *context, unsigned int reg,
> > + unsigned int *val)
> > +{
> > + u8 ipc_out;
> > + int ret;
> > +
> > + ret = intel_scu_ipc_ioread8(reg, &ipc_out);
> > + if (ret)
> > + return ret;
> > +
> > + *val = ipc_out;
> > + return 0;
> > +}
> > +
> > +static int bcove_ipc_byte_reg_write(void *context, unsigned int reg,
> > + unsigned int val)
> > +{
> > + u8 ipc_in = val;
> > + int ret;
> > +
> > + ret = intel_scu_ipc_iowrite8(reg, ipc_in);
> > + if (ret)
> > + return ret;
> > +
> > + return 0;
> > +}
>
> Is intel_scu_ipc_iowrite8() going to be used with Regmap again? If
> so, it's probably best to have these as part of the API. Probably
> supplied as an inline function.

Perhaps when new driver comes to the spot, but currently there is neither such
need nor existing user.

> > +static const struct regmap_config bcove_regmap_config = {
> > + .reg_bits = 16,
> > + .val_bits = 8,
> > + .max_register = 0xff,
> > + .reg_write = bcove_ipc_byte_reg_write,
> > + .reg_read = bcove_ipc_byte_reg_read,
> > +};
> > +
> > +static int bcove_probe(struct platform_device *pdev)
> > +{
> > + struct device *dev = &pdev->dev;
> > + struct intel_soc_pmic *pmic;
> > + unsigned int i;
> > + int ret;
> > +
> > + pmic = devm_kzalloc(dev, sizeof(*pmic), GFP_KERNEL);
> > + if (!pmic)
> > + return -ENOMEM;
> > +
> > + platform_set_drvdata(pdev, pmic);
> > + pmic->dev = &pdev->dev;
> > +
> > + pmic->regmap = devm_regmap_init(dev, NULL, pmic, &bcove_regmap_config);
> > + if (IS_ERR(pmic->regmap))
> > + return PTR_ERR(pmic->regmap);
> > +
> > + for (i = 0; i < ARRAY_SIZE(irq_level2_resources); i++) {
> > + ret = platform_get_irq(pdev, i);
> > + if (ret < 0)
> > + return ret;
> > +
> > + irq_level2_resources[i].start = ret;
> > + irq_level2_resources[i].end = ret;
> > + }
>
> I still get the same feeling that this is a waste of a driver!
>
> ACPI hackery, if you will. :(
>
> It's just a shame that I can't think of a better way to do it.

I don't object that the "solution" in ACPI followed by the driver is not good.
But for now it prevents to enable USB OTG (as a main feature among many other
useful ones) in upstream. Please, consider apply as is. If anything better
comes to your mind I will be glad to improve driver in the future.

>
> > + return devm_mfd_add_devices(dev, PLATFORM_DEVID_NONE,
> > + bcove_dev, ARRAY_SIZE(bcove_dev),
> > + NULL, 0, NULL);
> > +}
> > +
> > +static const struct acpi_device_id bcove_acpi_ids[] = {
> > + { "INTC100E" },
> > + {}
> > +};
> > +MODULE_DEVICE_TABLE(acpi, bcove_acpi_ids);
> > +
> > +static struct platform_driver bcove_driver = {
> > + .driver = {
> > + .name = "intel_soc_pmic_mrfld",
> > + .acpi_match_table = bcove_acpi_ids,
> > + },
> > + .probe = bcove_probe,
> > +};
> > +module_platform_driver(bcove_driver);
> > +
> > +MODULE_DESCRIPTION("IPC driver for Intel SoC Basin Cove PMIC");
> > +MODULE_LICENSE("GPL v2");
> > diff --git a/include/linux/mfd/intel_soc_pmic_mrfld.h b/include/linux/mfd/intel_soc_pmic_mrfld.h
> > new file mode 100644
> > index 000000000000..4daecd682275
> > --- /dev/null
> > +++ b/include/linux/mfd/intel_soc_pmic_mrfld.h
> > @@ -0,0 +1,81 @@
> > +/* SPDX-License-Identifier: GPL-2.0 */
> > +/*
> > + * Header file for Intel Merrifield Basin Cove PMIC
> > + *
> > + * Copyright (C) 2019 Intel Corporation. All rights reserved.
> > + */
> > +
> > +#ifndef __INTEL_SOC_PMIC_MRFLD_H__
> > +#define __INTEL_SOC_PMIC_MRFLD_H__
> > +
> > +#include <linux/bits.h>
> > +
> > +#define BCOVE_ID 0x00
> > +
> > +#define BCOVE_ID_MINREV0 GENMASK(2, 0)
> > +#define BCOVE_ID_MAJREV0 GENMASK(5, 3)
> > +#define BCOVE_ID_VENDID0 GENMASK(7, 6)
> > +
> > +#define BCOVE_MINOR(x) (unsigned int)(((x) & BCOVE_ID_MINREV0) >> 0)
> > +#define BCOVE_MAJOR(x) (unsigned int)(((x) & BCOVE_ID_MAJREV0) >> 3)
> > +#define BCOVE_VENDOR(x) (unsigned int)(((x) & BCOVE_ID_VENDID0) >> 6)
> > +
> > +#define BCOVE_IRQLVL1 0x01
> > +
> > +#define BCOVE_PBIRQ 0x02
> > +#define BCOVE_TMUIRQ 0x03
> > +#define BCOVE_THRMIRQ 0x04
> > +#define BCOVE_BCUIRQ 0x05
> > +#define BCOVE_ADCIRQ 0x06
> > +#define BCOVE_CHGRIRQ0 0x07
> > +#define BCOVE_CHGRIRQ1 0x08
> > +#define BCOVE_GPIOIRQ 0x09
> > +#define BCOVE_CRITIRQ 0x0B
> > +
> > +#define BCOVE_MIRQLVL1 0x0C
> > +
> > +#define BCOVE_MPBIRQ 0x0D
> > +#define BCOVE_MTMUIRQ 0x0E
> > +#define BCOVE_MTHRMIRQ 0x0F
> > +#define BCOVE_MBCUIRQ 0x10
> > +#define BCOVE_MADCIRQ 0x11
> > +#define BCOVE_MCHGRIRQ0 0x12
> > +#define BCOVE_MCHGRIRQ1 0x13
> > +#define BCOVE_MGPIOIRQ 0x14
> > +#define BCOVE_MCRITIRQ 0x16
> > +
> > +#define BCOVE_SCHGRIRQ0 0x4E
> > +#define BCOVE_SCHGRIRQ1 0x4F
> > +
> > +/* Level 1 IRQs */
> > +#define BCOVE_LVL1_PWRBTN BIT(0) /* power button */
> > +#define BCOVE_LVL1_TMU BIT(1) /* time management unit */
> > +#define BCOVE_LVL1_THRM BIT(2) /* thermal */
> > +#define BCOVE_LVL1_BCU BIT(3) /* burst control unit */
> > +#define BCOVE_LVL1_ADC BIT(4) /* ADC */
> > +#define BCOVE_LVL1_CHGR BIT(5) /* charger */
> > +#define BCOVE_LVL1_GPIO BIT(6) /* GPIO */
> > +#define BCOVE_LVL1_CRIT BIT(7) /* critical event */
> > +
> > +/* Level 2 IRQs: power button */
> > +#define BCOVE_PBIRQ_PBTN BIT(0)
> > +#define BCOVE_PBIRQ_UBTN BIT(1)
> > +
> > +/* Level 2 IRQs: ADC */
> > +#define BCOVE_ADCIRQ_BATTEMP BIT(2)
> > +#define BCOVE_ADCIRQ_SYSTEMP BIT(3)
> > +#define BCOVE_ADCIRQ_BATTID BIT(4)
> > +#define BCOVE_ADCIRQ_VIBATT BIT(5)
> > +#define BCOVE_ADCIRQ_CCTICK BIT(7)
> > +
> > +/* Level 2 IRQs: charger */
> > +#define BCOVE_CHGRIRQ_BAT0ALRT BIT(4)
> > +#define BCOVE_CHGRIRQ_BAT1ALRT BIT(5)
> > +#define BCOVE_CHGRIRQ_BATCRIT BIT(6)
> > +
> > +#define BCOVE_CHGRIRQ_VBUSDET BIT(0)
> > +#define BCOVE_CHGRIRQ_DCDET BIT(1)
> > +#define BCOVE_CHGRIRQ_BATTDET BIT(2)
> > +#define BCOVE_CHGRIRQ_USBIDDET BIT(3)
> > +
> > +#endif /* __INTEL_SOC_PMIC_MRFLD_H__ */
>
> --
> Lee Jones [李琼斯]
> Linaro Services Technical Lead
> Linaro.org │ Open source software for ARM SoCs
> Follow Linaro: Facebook | Twitter | Blog

--
With Best Regards,
Andy Shevchenko


\
 
 \ /
  Last update: 2019-08-13 15:02    [W:0.051 / U:3.468 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site