lkml.org 
[lkml]   [2019]   [Aug]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH V16 11/13] dt-bindings: PHY: P2U: Add Tegra194 P2U block
Date
Add support for Tegra194 P2U (PIPE to UPHY) module block which is a glue
module instantiated one for each PCIe lane between Synopsys DesignWare core
based PCIe IP and Universal PHY block.

Signed-off-by: Vidya Sagar <vidyas@nvidia.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Thierry Reding <treding@nvidia.com>
Acked-by: Kishon Vijay Abraham I <kishon@ti.com>
---
V16:
* None

V15:
* None

V14:
* None

V13:
* None

V12:
* None

V11:
* None

V10:
* None

V9:
* None

V8:
* None

V7:
* None

V6:
* Added Sob
* Changed node name from "p2u@xxxxxxxx" to "phy@xxxxxxxx"

V5:
* None

V4:
* None

V3:
* Changed node label to reflect new format that includes either 'hsio' or
'nvhs' in its name to reflect which UPHY brick they belong to

V2:
* This is a new patch in v2 series

.../bindings/phy/phy-tegra194-p2u.txt | 28 +++++++++++++++++++
1 file changed, 28 insertions(+)
create mode 100644 Documentation/devicetree/bindings/phy/phy-tegra194-p2u.txt

diff --git a/Documentation/devicetree/bindings/phy/phy-tegra194-p2u.txt b/Documentation/devicetree/bindings/phy/phy-tegra194-p2u.txt
new file mode 100644
index 000000000000..d23ff90baad5
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/phy-tegra194-p2u.txt
@@ -0,0 +1,28 @@
+NVIDIA Tegra194 P2U binding
+
+Tegra194 has two PHY bricks namely HSIO (High Speed IO) and NVHS (NVIDIA High
+Speed) each interfacing with 12 and 8 P2U instances respectively.
+A P2U instance is a glue logic between Synopsys DesignWare Core PCIe IP's PIPE
+interface and PHY of HSIO/NVHS bricks. Each P2U instance represents one PCIe
+lane.
+
+Required properties:
+- compatible: For Tegra19x, must contain "nvidia,tegra194-p2u".
+- reg: Should be the physical address space and length of respective each P2U
+ instance.
+- reg-names: Must include the entry "ctl".
+
+Required properties for PHY port node:
+- #phy-cells: Defined by generic PHY bindings. Must be 0.
+
+Refer to phy/phy-bindings.txt for the generic PHY binding properties.
+
+Example:
+
+p2u_hsio_0: phy@3e10000 {
+ compatible = "nvidia,tegra194-p2u";
+ reg = <0x03e10000 0x10000>;
+ reg-names = "ctl";
+
+ #phy-cells = <0>;
+};
--
2.17.1
\
 
 \ /
  Last update: 2019-08-13 13:39    [W:0.054 / U:18.632 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site