lkml.org 
[lkml]   [2019]   [Aug]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH V5 0/3] mmc: mmci: add busy detect for stm32 sdmmc variant
Date
From: Ludovic Barre <ludovic.barre@st.com>

This patch series adds busy detect for stm32 sdmmc variant.
Some adaptations are required:
-On sdmmc the data timer is started on data transfert
and busy state, so we must add hardware busy timeout support.
-Add busy_complete callback at mmci_host_ops to allow to define
a specific busy completion by variant.
-Add sdmmc busy_complete calback.

V5:
-Replaces !cmd->data to !host->mrq->data to avoid overwrite
of datatimer register by the first command (cmd23, without data) of
SBC request.

V4:
-Re-work with busy_complete callback
-In series, move "mmc: mmci: add hardware busy timeout feature" in
first to simplify busy_complete prototype with err_msk parameter.

V3:
-rebase on latest mmc next
-replace re-read by status parameter.

V2:
-mmci_cmd_irq cleanup in separate patch.
-simplify the busy_detect_flag exclude
-replace sdmmc specific comment in
"mmc: mmci: avoid fake busy polling in mmci_irq"
to focus on common behavior

Ludovic Barre (3):
mmc: mmci: add hardware busy timeout feature
mmc: mmci: add busy_complete callback
mmc: mmci: sdmmc: add busy_complete callback

drivers/mmc/host/mmci.c | 178 +++++++++++++++++-----------
drivers/mmc/host/mmci.h | 7 +-
drivers/mmc/host/mmci_stm32_sdmmc.c | 38 ++++++
3 files changed, 151 insertions(+), 72 deletions(-)

--
2.17.1

\
 
 \ /
  Last update: 2019-08-13 12:01    [W:0.029 / U:13.940 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site