lkml.org 
[lkml]   [2019]   [Aug]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 05/28] PCI/hotplug: remove the sgi_hotplug driver
Date
The SGI SN2 support is about to be removed.  Remove this driver that
depends on the SN2 support.

Signed-off-by: Christoph Hellwig <hch@lst.de>
---
drivers/pci/hotplug/Kconfig | 9 -
drivers/pci/hotplug/Makefile | 1 -
drivers/pci/hotplug/sgi_hotplug.c | 700 ------------------------------
3 files changed, 710 deletions(-)
delete mode 100644 drivers/pci/hotplug/sgi_hotplug.c

diff --git a/drivers/pci/hotplug/Kconfig b/drivers/pci/hotplug/Kconfig
index e9f78eb390d2..e7b493c22bf3 100644
--- a/drivers/pci/hotplug/Kconfig
+++ b/drivers/pci/hotplug/Kconfig
@@ -147,15 +147,6 @@ config HOTPLUG_PCI_RPA_DLPAR

When in doubt, say N.

-config HOTPLUG_PCI_SGI
- tristate "SGI PCI Hotplug Support"
- depends on IA64_SGI_SN2 || IA64_GENERIC
- help
- Say Y here if you want to use the SGI Altix Hotplug
- Driver for PCI devices.
-
- When in doubt, say N.
-
config HOTPLUG_PCI_S390
bool "System z PCI Hotplug Support"
depends on S390 && 64BIT
diff --git a/drivers/pci/hotplug/Makefile b/drivers/pci/hotplug/Makefile
index 7e3331603714..5196983220df 100644
--- a/drivers/pci/hotplug/Makefile
+++ b/drivers/pci/hotplug/Makefile
@@ -18,7 +18,6 @@ obj-$(CONFIG_HOTPLUG_PCI_SHPC) += shpchp.o
obj-$(CONFIG_HOTPLUG_PCI_POWERNV) += pnv-php.o
obj-$(CONFIG_HOTPLUG_PCI_RPA) += rpaphp.o
obj-$(CONFIG_HOTPLUG_PCI_RPA_DLPAR) += rpadlpar_io.o
-obj-$(CONFIG_HOTPLUG_PCI_SGI) += sgi_hotplug.o
obj-$(CONFIG_HOTPLUG_PCI_ACPI) += acpiphp.o
obj-$(CONFIG_HOTPLUG_PCI_S390) += s390_pci_hpc.o

diff --git a/drivers/pci/hotplug/sgi_hotplug.c b/drivers/pci/hotplug/sgi_hotplug.c
deleted file mode 100644
index 231f5bdd3d2d..000000000000
--- a/drivers/pci/hotplug/sgi_hotplug.c
+++ /dev/null
@@ -1,700 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Copyright (C) 2005-2006 Silicon Graphics, Inc. All rights reserved.
- *
- * This work was based on the 2.4/2.6 kernel development by Dick Reigner.
- * Work to add BIOS PROM support was completed by Mike Habeck.
- */
-
-#include <linux/acpi.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/pci.h>
-#include <linux/pci_hotplug.h>
-#include <linux/proc_fs.h>
-#include <linux/slab.h>
-#include <linux/types.h>
-#include <linux/mutex.h>
-
-#include <asm/sn/addrs.h>
-#include <asm/sn/geo.h>
-#include <asm/sn/l1.h>
-#include <asm/sn/module.h>
-#include <asm/sn/pcibr_provider.h>
-#include <asm/sn/pcibus_provider_defs.h>
-#include <asm/sn/pcidev.h>
-#include <asm/sn/sn_feature_sets.h>
-#include <asm/sn/sn_sal.h>
-#include <asm/sn/types.h>
-#include <asm/sn/acpi.h>
-
-#include "../pci.h"
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("SGI (prarit@sgi.com, dickie@sgi.com, habeck@sgi.com)");
-MODULE_DESCRIPTION("SGI Altix Hot Plug PCI Controller Driver");
-
-
-/* SAL call error codes. Keep in sync with prom header io/include/pcibr.h */
-#define PCI_SLOT_ALREADY_UP 2 /* slot already up */
-#define PCI_SLOT_ALREADY_DOWN 3 /* slot already down */
-#define PCI_L1_ERR 7 /* L1 console command error */
-#define PCI_EMPTY_33MHZ 15 /* empty 33 MHz bus */
-
-
-#define PCIIO_ASIC_TYPE_TIOCA 4
-#define PCI_L1_QSIZE 128 /* our L1 message buffer size */
-#define SN_MAX_HP_SLOTS 32 /* max hotplug slots */
-#define SN_SLOT_NAME_SIZE 33 /* size of name string */
-
-/* internal list head */
-static struct list_head sn_hp_list;
-
-/* hotplug_slot struct's private pointer */
-struct slot {
- int device_num;
- struct pci_bus *pci_bus;
- /* this struct for glue internal only */
- struct hotplug_slot hotplug_slot;
- struct list_head hp_list;
- char physical_path[SN_SLOT_NAME_SIZE];
-};
-
-struct pcibr_slot_enable_resp {
- int resp_sub_errno;
- char resp_l1_msg[PCI_L1_QSIZE + 1];
-};
-
-struct pcibr_slot_disable_resp {
- int resp_sub_errno;
- char resp_l1_msg[PCI_L1_QSIZE + 1];
-};
-
-enum sn_pci_req_e {
- PCI_REQ_SLOT_ELIGIBLE,
- PCI_REQ_SLOT_DISABLE
-};
-
-static int enable_slot(struct hotplug_slot *slot);
-static int disable_slot(struct hotplug_slot *slot);
-static inline int get_power_status(struct hotplug_slot *slot, u8 *value);
-
-static const struct hotplug_slot_ops sn_hotplug_slot_ops = {
- .enable_slot = enable_slot,
- .disable_slot = disable_slot,
- .get_power_status = get_power_status,
-};
-
-static DEFINE_MUTEX(sn_hotplug_mutex);
-
-static struct slot *to_slot(struct hotplug_slot *bss_hotplug_slot)
-{
- return container_of(bss_hotplug_slot, struct slot, hotplug_slot);
-}
-
-static ssize_t path_show(struct pci_slot *pci_slot, char *buf)
-{
- int retval = -ENOENT;
- struct slot *slot = to_slot(pci_slot->hotplug);
-
- if (!slot)
- return retval;
-
- retval = sprintf(buf, "%s\n", slot->physical_path);
- return retval;
-}
-
-static struct pci_slot_attribute sn_slot_path_attr = __ATTR_RO(path);
-
-static int sn_pci_slot_valid(struct pci_bus *pci_bus, int device)
-{
- struct pcibus_info *pcibus_info;
- u16 busnum, segment, ioboard_type;
-
- pcibus_info = SN_PCIBUS_BUSSOFT_INFO(pci_bus);
-
- /* Check to see if this is a valid slot on 'pci_bus' */
- if (!(pcibus_info->pbi_valid_devices & (1 << device)))
- return -EPERM;
-
- ioboard_type = sn_ioboard_to_pci_bus(pci_bus);
- busnum = pcibus_info->pbi_buscommon.bs_persist_busnum;
- segment = pci_domain_nr(pci_bus) & 0xf;
-
- /* Do not allow hotplug operations on base I/O cards */
- if ((ioboard_type == L1_BRICKTYPE_IX ||
- ioboard_type == L1_BRICKTYPE_IA) &&
- (segment == 1 && busnum == 0 && device != 1))
- return -EPERM;
-
- return 1;
-}
-
-static int sn_pci_bus_valid(struct pci_bus *pci_bus)
-{
- struct pcibus_info *pcibus_info;
- u32 asic_type;
- u16 ioboard_type;
-
- /* Don't register slots hanging off the TIOCA bus */
- pcibus_info = SN_PCIBUS_BUSSOFT_INFO(pci_bus);
- asic_type = pcibus_info->pbi_buscommon.bs_asic_type;
- if (asic_type == PCIIO_ASIC_TYPE_TIOCA)
- return -EPERM;
-
- /* Only register slots in I/O Bricks that support hotplug */
- ioboard_type = sn_ioboard_to_pci_bus(pci_bus);
- switch (ioboard_type) {
- case L1_BRICKTYPE_IX:
- case L1_BRICKTYPE_PX:
- case L1_BRICKTYPE_IA:
- case L1_BRICKTYPE_PA:
- case L1_BOARDTYPE_PCIX3SLOT:
- return 1;
- break;
- default:
- return -EPERM;
- break;
- }
-
- return -EIO;
-}
-
-static int sn_hp_slot_private_alloc(struct hotplug_slot **bss_hotplug_slot,
- struct pci_bus *pci_bus, int device,
- char *name)
-{
- struct pcibus_info *pcibus_info;
- struct slot *slot;
-
- pcibus_info = SN_PCIBUS_BUSSOFT_INFO(pci_bus);
-
- slot = kzalloc(sizeof(*slot), GFP_KERNEL);
- if (!slot)
- return -ENOMEM;
-
- slot->device_num = device;
- slot->pci_bus = pci_bus;
- sprintf(name, "%04x:%02x:%02x",
- pci_domain_nr(pci_bus),
- ((u16)pcibus_info->pbi_buscommon.bs_persist_busnum),
- device + 1);
-
- sn_generate_path(pci_bus, slot->physical_path);
-
- list_add(&slot->hp_list, &sn_hp_list);
- *bss_hotplug_slot = &slot->hotplug_slot;
-
- return 0;
-}
-
-static struct hotplug_slot *sn_hp_destroy(void)
-{
- struct slot *slot;
- struct pci_slot *pci_slot;
- struct hotplug_slot *bss_hotplug_slot = NULL;
-
- list_for_each_entry(slot, &sn_hp_list, hp_list) {
- bss_hotplug_slot = &slot->hotplug_slot;
- pci_slot = bss_hotplug_slot->pci_slot;
- list_del(&slot->hp_list);
- sysfs_remove_file(&pci_slot->kobj,
- &sn_slot_path_attr.attr);
- break;
- }
- return bss_hotplug_slot;
-}
-
-static void sn_bus_free_data(struct pci_dev *dev)
-{
- struct pci_bus *subordinate_bus;
- struct pci_dev *child;
-
- /* Recursively clean up sn_irq_info structs */
- if (dev->subordinate) {
- subordinate_bus = dev->subordinate;
- list_for_each_entry(child, &subordinate_bus->devices, bus_list)
- sn_bus_free_data(child);
- }
- /*
- * Some drivers may use dma accesses during the
- * driver remove function. We release the sysdata
- * areas after the driver remove functions have
- * been called.
- */
- sn_bus_store_sysdata(dev);
- sn_pci_unfixup_slot(dev);
-}
-
-static int sn_slot_enable(struct hotplug_slot *bss_hotplug_slot,
- int device_num, char **ssdt)
-{
- struct slot *slot = to_slot(bss_hotplug_slot);
- struct pcibus_info *pcibus_info;
- struct pcibr_slot_enable_resp resp;
- int rc;
-
- pcibus_info = SN_PCIBUS_BUSSOFT_INFO(slot->pci_bus);
-
- /*
- * Power-on and initialize the slot in the SN
- * PCI infrastructure.
- */
- rc = sal_pcibr_slot_enable(pcibus_info, device_num, &resp, ssdt);
-
-
- if (rc == PCI_SLOT_ALREADY_UP) {
- pci_dbg(slot->pci_bus->self, "is already active\n");
- return 1; /* return 1 to user */
- }
-
- if (rc == PCI_L1_ERR) {
- pci_dbg(slot->pci_bus->self, "L1 failure %d with message: %s",
- resp.resp_sub_errno, resp.resp_l1_msg);
- return -EPERM;
- }
-
- if (rc) {
- pci_dbg(slot->pci_bus->self, "insert failed with error %d sub-error %d\n",
- rc, resp.resp_sub_errno);
- return -EIO;
- }
-
- pcibus_info = SN_PCIBUS_BUSSOFT_INFO(slot->pci_bus);
- pcibus_info->pbi_enabled_devices |= (1 << device_num);
-
- return 0;
-}
-
-static int sn_slot_disable(struct hotplug_slot *bss_hotplug_slot,
- int device_num, int action)
-{
- struct slot *slot = to_slot(bss_hotplug_slot);
- struct pcibus_info *pcibus_info;
- struct pcibr_slot_disable_resp resp;
- int rc;
-
- pcibus_info = SN_PCIBUS_BUSSOFT_INFO(slot->pci_bus);
-
- rc = sal_pcibr_slot_disable(pcibus_info, device_num, action, &resp);
-
- if ((action == PCI_REQ_SLOT_ELIGIBLE) &&
- (rc == PCI_SLOT_ALREADY_DOWN)) {
- pci_dbg(slot->pci_bus->self, "Slot %s already inactive\n", slot->physical_path);
- return 1; /* return 1 to user */
- }
-
- if ((action == PCI_REQ_SLOT_ELIGIBLE) && (rc == PCI_EMPTY_33MHZ)) {
- pci_dbg(slot->pci_bus->self, "Cannot remove last 33MHz card\n");
- return -EPERM;
- }
-
- if ((action == PCI_REQ_SLOT_ELIGIBLE) && (rc == PCI_L1_ERR)) {
- pci_dbg(slot->pci_bus->self, "L1 failure %d with message \n%s\n",
- resp.resp_sub_errno, resp.resp_l1_msg);
- return -EPERM;
- }
-
- if ((action == PCI_REQ_SLOT_ELIGIBLE) && rc) {
- pci_dbg(slot->pci_bus->self, "remove failed with error %d sub-error %d\n",
- rc, resp.resp_sub_errno);
- return -EIO;
- }
-
- if ((action == PCI_REQ_SLOT_ELIGIBLE) && !rc)
- return 0;
-
- if ((action == PCI_REQ_SLOT_DISABLE) && !rc) {
- pcibus_info = SN_PCIBUS_BUSSOFT_INFO(slot->pci_bus);
- pcibus_info->pbi_enabled_devices &= ~(1 << device_num);
- pci_dbg(slot->pci_bus->self, "remove successful\n");
- return 0;
- }
-
- if ((action == PCI_REQ_SLOT_DISABLE) && rc) {
- pci_dbg(slot->pci_bus->self, "remove failed rc = %d\n", rc);
- }
-
- return rc;
-}
-
-/*
- * Power up and configure the slot via a SAL call to PROM.
- * Scan slot (and any children), do any platform specific fixup,
- * and find device driver.
- */
-static int enable_slot(struct hotplug_slot *bss_hotplug_slot)
-{
- struct slot *slot = to_slot(bss_hotplug_slot);
- struct pci_bus *new_bus = NULL;
- struct pci_dev *dev;
- int num_funcs;
- int new_ppb = 0;
- int rc;
- char *ssdt = NULL;
- void pcibios_fixup_device_resources(struct pci_dev *);
-
- /* Serialize the Linux PCI infrastructure */
- mutex_lock(&sn_hotplug_mutex);
-
- /*
- * Power-on and initialize the slot in the SN
- * PCI infrastructure. Also, retrieve the ACPI SSDT
- * table for the slot (if ACPI capable PROM).
- */
- rc = sn_slot_enable(bss_hotplug_slot, slot->device_num, &ssdt);
- if (rc) {
- mutex_unlock(&sn_hotplug_mutex);
- return rc;
- }
-
- if (ssdt)
- ssdt = __va(ssdt);
- /* Add the new SSDT for the slot to the ACPI namespace */
- if (SN_ACPI_BASE_SUPPORT() && ssdt) {
- acpi_status ret;
-
- ret = acpi_load_table((struct acpi_table_header *)ssdt);
- if (ACPI_FAILURE(ret)) {
- printk(KERN_ERR "%s: acpi_load_table failed (0x%x)\n",
- __func__, ret);
- /* try to continue on */
- }
- }
-
- num_funcs = pci_scan_slot(slot->pci_bus,
- PCI_DEVFN(slot->device_num + 1, 0));
- if (!num_funcs) {
- pci_dbg(slot->pci_bus->self, "no device in slot\n");
- mutex_unlock(&sn_hotplug_mutex);
- return -ENODEV;
- }
-
- /*
- * Map SN resources for all functions on the card
- * to the Linux PCI interface and tell the drivers
- * about them.
- */
- list_for_each_entry(dev, &slot->pci_bus->devices, bus_list) {
- if (PCI_SLOT(dev->devfn) != slot->device_num + 1)
- continue;
-
- /* Need to do slot fixup on PPB before fixup of children
- * (PPB's pcidev_info needs to be in pcidev_info list
- * before child's SN_PCIDEV_INFO() call to setup
- * pdi_host_pcidev_info).
- */
- pcibios_fixup_device_resources(dev);
- if (SN_ACPI_BASE_SUPPORT())
- sn_acpi_slot_fixup(dev);
- else
- sn_io_slot_fixup(dev);
- if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE) {
- pci_hp_add_bridge(dev);
- if (dev->subordinate) {
- new_bus = dev->subordinate;
- new_ppb = 1;
- }
- }
- }
-
- /*
- * Add the slot's devices to the ACPI infrastructure */
- if (SN_ACPI_BASE_SUPPORT() && ssdt) {
- unsigned long long adr;
- struct acpi_device *pdevice;
- acpi_handle phandle;
- acpi_handle chandle = NULL;
- acpi_handle rethandle;
- acpi_status ret;
-
- phandle = acpi_device_handle(PCI_CONTROLLER(slot->pci_bus)->companion);
-
- if (acpi_bus_get_device(phandle, &pdevice)) {
- pci_dbg(slot->pci_bus->self, "no parent device, assuming NULL\n");
- pdevice = NULL;
- }
-
- acpi_scan_lock_acquire();
- /*
- * Walk the rootbus node's immediate children looking for
- * the slot's device node(s). There can be more than
- * one for multifunction devices.
- */
- for (;;) {
- rethandle = NULL;
- ret = acpi_get_next_object(ACPI_TYPE_DEVICE,
- phandle, chandle,
- &rethandle);
-
- if (ret == AE_NOT_FOUND || rethandle == NULL)
- break;
-
- chandle = rethandle;
-
- ret = acpi_evaluate_integer(chandle, METHOD_NAME__ADR,
- NULL, &adr);
-
- if (ACPI_SUCCESS(ret) &&
- (adr>>16) == (slot->device_num + 1)) {
-
- ret = acpi_bus_scan(chandle);
- if (ACPI_FAILURE(ret)) {
- printk(KERN_ERR "%s: acpi_bus_scan failed (0x%x) for slot %d func %d\n",
- __func__, ret, (int)(adr>>16),
- (int)(adr&0xffff));
- /* try to continue on */
- }
- }
- }
- acpi_scan_lock_release();
- }
-
- pci_lock_rescan_remove();
-
- /* Call the driver for the new device */
- pci_bus_add_devices(slot->pci_bus);
- /* Call the drivers for the new devices subordinate to PPB */
- if (new_ppb)
- pci_bus_add_devices(new_bus);
-
- pci_unlock_rescan_remove();
- mutex_unlock(&sn_hotplug_mutex);
-
- if (rc == 0)
- pci_dbg(slot->pci_bus->self, "insert operation successful\n");
- else
- pci_dbg(slot->pci_bus->self, "insert operation failed rc = %d\n", rc);
-
- return rc;
-}
-
-static int disable_slot(struct hotplug_slot *bss_hotplug_slot)
-{
- struct slot *slot = to_slot(bss_hotplug_slot);
- struct pci_dev *dev, *temp;
- int rc;
- acpi_handle ssdt_hdl = NULL;
-
- /* Acquire update access to the bus */
- mutex_lock(&sn_hotplug_mutex);
-
- /* is it okay to bring this slot down? */
- rc = sn_slot_disable(bss_hotplug_slot, slot->device_num,
- PCI_REQ_SLOT_ELIGIBLE);
- if (rc)
- goto leaving;
-
- /* free the ACPI resources for the slot */
- if (SN_ACPI_BASE_SUPPORT() &&
- PCI_CONTROLLER(slot->pci_bus)->companion) {
- unsigned long long adr;
- struct acpi_device *device;
- acpi_handle phandle;
- acpi_handle chandle = NULL;
- acpi_handle rethandle;
- acpi_status ret;
-
- /* Get the rootbus node pointer */
- phandle = acpi_device_handle(PCI_CONTROLLER(slot->pci_bus)->companion);
-
- acpi_scan_lock_acquire();
- /*
- * Walk the rootbus node's immediate children looking for
- * the slot's device node(s). There can be more than
- * one for multifunction devices.
- */
- for (;;) {
- rethandle = NULL;
- ret = acpi_get_next_object(ACPI_TYPE_DEVICE,
- phandle, chandle,
- &rethandle);
-
- if (ret == AE_NOT_FOUND || rethandle == NULL)
- break;
-
- chandle = rethandle;
-
- ret = acpi_evaluate_integer(chandle,
- METHOD_NAME__ADR,
- NULL, &adr);
- if (ACPI_SUCCESS(ret) &&
- (adr>>16) == (slot->device_num + 1)) {
- /* retain the owner id */
- ssdt_hdl = chandle;
-
- ret = acpi_bus_get_device(chandle,
- &device);
- if (ACPI_SUCCESS(ret))
- acpi_bus_trim(device);
- }
- }
- acpi_scan_lock_release();
- }
-
- pci_lock_rescan_remove();
- /* Free the SN resources assigned to the Linux device.*/
- list_for_each_entry_safe(dev, temp, &slot->pci_bus->devices, bus_list) {
- if (PCI_SLOT(dev->devfn) != slot->device_num + 1)
- continue;
-
- pci_dev_get(dev);
- sn_bus_free_data(dev);
- pci_stop_and_remove_bus_device(dev);
- pci_dev_put(dev);
- }
- pci_unlock_rescan_remove();
-
- /* Remove the SSDT for the slot from the ACPI namespace */
- if (SN_ACPI_BASE_SUPPORT() && ssdt_hdl) {
- acpi_status ret;
- ret = acpi_unload_parent_table(ssdt_hdl);
- if (ACPI_FAILURE(ret)) {
- acpi_handle_err(ssdt_hdl,
- "%s: acpi_unload_parent_table failed (0x%x)\n",
- __func__, ret);
- /* try to continue on */
- }
- }
-
- /* free the collected sysdata pointers */
- sn_bus_free_sysdata();
-
- /* Deactivate slot */
- rc = sn_slot_disable(bss_hotplug_slot, slot->device_num,
- PCI_REQ_SLOT_DISABLE);
- leaving:
- /* Release the bus lock */
- mutex_unlock(&sn_hotplug_mutex);
-
- return rc;
-}
-
-static inline int get_power_status(struct hotplug_slot *bss_hotplug_slot,
- u8 *value)
-{
- struct slot *slot = to_slot(bss_hotplug_slot);
- struct pcibus_info *pcibus_info;
- u32 power;
-
- pcibus_info = SN_PCIBUS_BUSSOFT_INFO(slot->pci_bus);
- mutex_lock(&sn_hotplug_mutex);
- power = pcibus_info->pbi_enabled_devices & (1 << slot->device_num);
- *value = power ? 1 : 0;
- mutex_unlock(&sn_hotplug_mutex);
- return 0;
-}
-
-static void sn_release_slot(struct hotplug_slot *bss_hotplug_slot)
-{
- kfree(to_slot(bss_hotplug_slot));
-}
-
-static int sn_hotplug_slot_register(struct pci_bus *pci_bus)
-{
- int device;
- struct pci_slot *pci_slot;
- struct hotplug_slot *bss_hotplug_slot;
- char name[SN_SLOT_NAME_SIZE];
- int rc = 0;
-
- /*
- * Currently only four devices are supported,
- * in the future there maybe more -- up to 32.
- */
-
- for (device = 0; device < SN_MAX_HP_SLOTS ; device++) {
- if (sn_pci_slot_valid(pci_bus, device) != 1)
- continue;
-
- if (sn_hp_slot_private_alloc(&bss_hotplug_slot,
- pci_bus, device, name)) {
- rc = -ENOMEM;
- goto alloc_err;
- }
- bss_hotplug_slot->ops = &sn_hotplug_slot_ops;
-
- rc = pci_hp_register(bss_hotplug_slot, pci_bus, device, name);
- if (rc)
- goto register_err;
-
- pci_slot = bss_hotplug_slot->pci_slot;
- rc = sysfs_create_file(&pci_slot->kobj,
- &sn_slot_path_attr.attr);
- if (rc)
- goto alloc_err;
- }
- pci_dbg(pci_bus->self, "Registered bus with hotplug\n");
- return rc;
-
-register_err:
- pci_dbg(pci_bus->self, "bus failed to register with err = %d\n",
- rc);
-
- /* destroy THIS element */
- sn_hp_destroy();
- sn_release_slot(bss_hotplug_slot);
-
-alloc_err:
- /* destroy anything else on the list */
- while ((bss_hotplug_slot = sn_hp_destroy())) {
- pci_hp_deregister(bss_hotplug_slot);
- sn_release_slot(bss_hotplug_slot);
- }
-
- return rc;
-}
-
-static int __init sn_pci_hotplug_init(void)
-{
- struct pci_bus *pci_bus = NULL;
- int rc;
- int registered = 0;
-
- if (!sn_prom_feature_available(PRF_HOTPLUG_SUPPORT)) {
- printk(KERN_ERR "%s: PROM version does not support hotplug.\n",
- __func__);
- return -EPERM;
- }
-
- INIT_LIST_HEAD(&sn_hp_list);
-
- while ((pci_bus = pci_find_next_bus(pci_bus))) {
- if (!pci_bus->sysdata)
- continue;
-
- rc = sn_pci_bus_valid(pci_bus);
- if (rc != 1) {
- pci_dbg(pci_bus->self, "not a valid hotplug bus\n");
- continue;
- }
- pci_dbg(pci_bus->self, "valid hotplug bus\n");
-
- rc = sn_hotplug_slot_register(pci_bus);
- if (!rc) {
- registered = 1;
- } else {
- registered = 0;
- break;
- }
- }
-
- return registered == 1 ? 0 : -ENODEV;
-}
-
-static void __exit sn_pci_hotplug_exit(void)
-{
- struct hotplug_slot *bss_hotplug_slot;
-
- while ((bss_hotplug_slot = sn_hp_destroy())) {
- pci_hp_deregister(bss_hotplug_slot);
- sn_release_slot(bss_hotplug_slot);
- }
-
- if (!list_empty(&sn_hp_list))
- printk(KERN_ERR "%s: internal list is not empty\n", __FILE__);
-}
-
-module_init(sn_pci_hotplug_init);
-module_exit(sn_pci_hotplug_exit);
--
2.20.1
\
 
 \ /
  Last update: 2019-08-13 09:28    [W:0.116 / U:52.948 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site