lkml.org 
[lkml]   [2019]   [Aug]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v5 03/11] media: uapi: h264: Add the concept of decoding mode
From
Date
On 8/12/19 9:35 PM, Ezequiel Garcia wrote:
> From: Boris Brezillon <boris.brezillon@collabora.com>
>
> Some stateless decoders don't support per-slice decoding granularity
> (or at least not in a way that would make them efficient or easy to use).
>
> Expose a menu to control the supported decoding modes. Drivers are
> allowed to support only one decoding but they can support both too.
>
> Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
> Reviewed-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
> Tested-by: Philipp Zabel <p.zabel@pengutronix.de>
> ---
> Changes in v5:
> * Improve specification as suggested by Hans.
> Changes in v4:
> * Typos/rewording fixes
> Changes in v3:
> * s/per-{slice,frame} decoding/{slice,frame}-based decoding/
> * Add Paul's R-b
> Changes in v2:
> * Allow decoding multiple slices in per-slice decoding mode
> * Minor doc improvement/fixes
> ---
> .../media/uapi/v4l/ext-ctrls-codec.rst | 47 ++++++++++++++++++-
> .../media/uapi/v4l/pixfmt-compressed.rst | 3 +-
> drivers/media/v4l2-core/v4l2-ctrls.c | 9 ++++
> include/media/h264-ctrls.h | 11 +++++
> 4 files changed, 68 insertions(+), 2 deletions(-)
>
> diff --git a/Documentation/media/uapi/v4l/ext-ctrls-codec.rst b/Documentation/media/uapi/v4l/ext-ctrls-codec.rst
> index c5f39dd50043..568390273fde 100644
> --- a/Documentation/media/uapi/v4l/ext-ctrls-codec.rst
> +++ b/Documentation/media/uapi/v4l/ext-ctrls-codec.rst
> @@ -1747,6 +1747,11 @@ enum v4l2_mpeg_video_h264_hierarchical_coding_type -
> * - __u32
> - ``size``
> -
> + * - __u32
> + - ``start_byte_offset``
> + - Where the slice payload starts in the output buffer. Useful when the
> + OUTPUT buffer contains more than one slice (some codecs need to know
> + where each slice starts in this buffer).
> * - __u32
> - ``header_bit_size``
> -
> @@ -1930,7 +1935,10 @@ enum v4l2_mpeg_video_h264_hierarchical_coding_type -
> -
> * - __u16
> - ``num_slices``
> - - Number of slices needed to decode the current frame
> + - Number of slices needed to decode the current frame/field. When
> + operating in slice-based decoding mode (see
> + :c:type:`v4l2_mpeg_video_h264_decoding_mode`), this field
> + should always be set to one.
> * - __u16
> - ``nal_ref_idc``
> - NAL reference ID value coming from the NAL Unit header
> @@ -2021,6 +2029,43 @@ enum v4l2_mpeg_video_h264_hierarchical_coding_type -
> - 0x00000004
> - The DPB entry is a long term reference frame
>
> +``V4L2_CID_MPEG_VIDEO_H264_DECODING_MODE (enum)``
> + Specifies the decoding mode to use. Currently exposes slice-based and
> + frame-based decoding but new modes might be added later on.
> + This control is used to complement V4L2_PIX_FMT_H264_SLICE
> + pixel format. Applications that support V4L2_PIX_FMT_H264_SLICE
> + are required to set this control in order to specify the decoding mode
> + that is expected for the buffer.
> + Drivers may expose a single or multiple decoding modes, depending
> + on what they can support.
> +
> + .. note::
> +
> + This menu control is not yet part of the public kernel API and
> + it is expected to change.
> +
> +.. c:type:: v4l2_mpeg_video_h264_decoding_mode
> +
> +.. cssclass:: longtable
> +
> +.. flat-table::
> + :header-rows: 0
> + :stub-columns: 0
> + :widths: 1 1 2
> +
> + * - ``V4L2_MPEG_VIDEO_H264_SLICE_BASED_DECODING``
> + - 0
> + - The decoding is done at the slice granularity.
> + v4l2_ctrl_h264_decode_params->num_slices should be set to 1.
> + The OUTPUT buffer must contain a single slice.
> + * - ``V4L2_MPEG_VIDEO_H264_FRAME_BASED_DECODING``
> + - 1
> + - The decoding is done at the frame granularity.
> + v4l2_ctrl_h264_decode_params->num_slices should be set to the number of
> + slices forming a frame.
> + The OUTPUT buffer must contain all slices needed to decode the
> + frame. The OUTPUT buffer must also contain both fields.
> +
> .. _v4l2-mpeg-mpeg2:
>
> ``V4L2_CID_MPEG_VIDEO_MPEG2_SLICE_PARAMS (struct)``
> diff --git a/Documentation/media/uapi/v4l/pixfmt-compressed.rst b/Documentation/media/uapi/v4l/pixfmt-compressed.rst
> index 9b65473a2288..50557c85d99d 100644
> --- a/Documentation/media/uapi/v4l/pixfmt-compressed.rst
> +++ b/Documentation/media/uapi/v4l/pixfmt-compressed.rst
> @@ -61,7 +61,8 @@ Compressed Formats
> stateless video decoders that implement an H264 pipeline
> (using the :ref:`mem2mem` and :ref:`media-request-api`).
> Metadata associated with the frame to decode are required to
> - be passed through the ``V4L2_CID_MPEG_VIDEO_H264_SPS``,
> + be passed through the ``V4L2_CID_MPEG_VIDEO_H264_DECODING_MODE``,

No, that's not right. H264_DECODING_MODE isn't metadata that has to be
passed via a request. It's a pixelformat modifier and has to be set only
once to describe the format that's going to be passed to the HW.

That should be made clear here. Same goes for the next patch.

Regards,

Hans

> + ``V4L2_CID_MPEG_VIDEO_H264_SPS``,
> ``V4L2_CID_MPEG_VIDEO_H264_PPS``,
> ``V4L2_CID_MPEG_VIDEO_H264_SCALING_MATRIX``,
> ``V4L2_CID_MPEG_VIDEO_H264_SLICE_PARAMS`` and
> diff --git a/drivers/media/v4l2-core/v4l2-ctrls.c b/drivers/media/v4l2-core/v4l2-ctrls.c
> index cd1ae016706f..c3194299bfac 100644
> --- a/drivers/media/v4l2-core/v4l2-ctrls.c
> +++ b/drivers/media/v4l2-core/v4l2-ctrls.c
> @@ -402,6 +402,11 @@ const char * const *v4l2_ctrl_get_menu(u32 id)
> "Explicit",
> NULL,
> };
> + static const char * const h264_decoding_mode[] = {
> + "Slice-Based",
> + "Frame-Based",
> + NULL,
> + };
> static const char * const mpeg_mpeg2_level[] = {
> "Low",
> "Main",
> @@ -633,6 +638,8 @@ const char * const *v4l2_ctrl_get_menu(u32 id)
> return h264_fp_arrangement_type;
> case V4L2_CID_MPEG_VIDEO_H264_FMO_MAP_TYPE:
> return h264_fmo_map_type;
> + case V4L2_CID_MPEG_VIDEO_H264_DECODING_MODE:
> + return h264_decoding_mode;
> case V4L2_CID_MPEG_VIDEO_MPEG2_LEVEL:
> return mpeg_mpeg2_level;
> case V4L2_CID_MPEG_VIDEO_MPEG2_PROFILE:
> @@ -852,6 +859,7 @@ const char *v4l2_ctrl_get_name(u32 id)
> case V4L2_CID_MPEG_VIDEO_H264_SCALING_MATRIX: return "H264 Scaling Matrix";
> case V4L2_CID_MPEG_VIDEO_H264_SLICE_PARAMS: return "H264 Slice Parameters";
> case V4L2_CID_MPEG_VIDEO_H264_DECODE_PARAMS: return "H264 Decode Parameters";
> + case V4L2_CID_MPEG_VIDEO_H264_DECODING_MODE: return "H264 Decoding Mode";
> case V4L2_CID_MPEG_VIDEO_MPEG2_LEVEL: return "MPEG2 Level";
> case V4L2_CID_MPEG_VIDEO_MPEG2_PROFILE: return "MPEG2 Profile";
> case V4L2_CID_MPEG_VIDEO_MPEG4_I_FRAME_QP: return "MPEG4 I-Frame QP Value";
> @@ -1220,6 +1228,7 @@ void v4l2_ctrl_fill(u32 id, const char **name, enum v4l2_ctrl_type *type,
> case V4L2_CID_MPEG_VIDEO_H264_VUI_SAR_IDC:
> case V4L2_CID_MPEG_VIDEO_H264_SEI_FP_ARRANGEMENT_TYPE:
> case V4L2_CID_MPEG_VIDEO_H264_FMO_MAP_TYPE:
> + case V4L2_CID_MPEG_VIDEO_H264_DECODING_MODE:
> case V4L2_CID_MPEG_VIDEO_MPEG2_LEVEL:
> case V4L2_CID_MPEG_VIDEO_MPEG2_PROFILE:
> case V4L2_CID_MPEG_VIDEO_MPEG4_LEVEL:
> diff --git a/include/media/h264-ctrls.h b/include/media/h264-ctrls.h
> index 6160a69c0143..e6c510877f67 100644
> --- a/include/media/h264-ctrls.h
> +++ b/include/media/h264-ctrls.h
> @@ -26,6 +26,7 @@
> #define V4L2_CID_MPEG_VIDEO_H264_SCALING_MATRIX (V4L2_CID_MPEG_BASE+1002)
> #define V4L2_CID_MPEG_VIDEO_H264_SLICE_PARAMS (V4L2_CID_MPEG_BASE+1003)
> #define V4L2_CID_MPEG_VIDEO_H264_DECODE_PARAMS (V4L2_CID_MPEG_BASE+1004)
> +#define V4L2_CID_MPEG_VIDEO_H264_DECODING_MODE (V4L2_CID_MPEG_BASE+1005)
>
> /* enum v4l2_ctrl_type type values */
> #define V4L2_CTRL_TYPE_H264_SPS 0x0110
> @@ -33,6 +34,12 @@
> #define V4L2_CTRL_TYPE_H264_SCALING_MATRIX 0x0112
> #define V4L2_CTRL_TYPE_H264_SLICE_PARAMS 0x0113
> #define V4L2_CTRL_TYPE_H264_DECODE_PARAMS 0x0114
> +#define V4L2_CTRL_TYPE_H264_DECODING_MODE 0x0115
> +
> +enum v4l2_mpeg_video_h264_decoding_mode {
> + V4L2_MPEG_VIDEO_H264_SLICE_BASED_DECODING,
> + V4L2_MPEG_VIDEO_H264_FRAME_BASED_DECODING,
> +};
>
> #define V4L2_H264_SPS_CONSTRAINT_SET0_FLAG 0x01
> #define V4L2_H264_SPS_CONSTRAINT_SET1_FLAG 0x02
> @@ -125,6 +132,10 @@ struct v4l2_h264_pred_weight_table {
> struct v4l2_ctrl_h264_slice_params {
> /* Size in bytes, including header */
> __u32 size;
> +
> + /* Offset in bytes to the start of slice in the OUTPUT buffer. */
> + __u32 start_byte_offset;
> +
> /* Offset in bits to slice_data() from the beginning of this slice. */
> __u32 header_bit_size;
>
>

\
 
 \ /
  Last update: 2019-08-13 08:46    [W:0.091 / U:27.464 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site