lkml.org 
[lkml]   [2019]   [Aug]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH AUTOSEL 5.2 031/123] net: mvpp2: Don't check for 3 consecutive Idle frames for 10G links
Date
From: Maxime Chevallier <maxime.chevallier@bootlin.com>

[ Upstream commit bba18318e7d1d5c8b0bbafd65010a0cee3c65608 ]

PPv2's XLGMAC can wait for 3 idle frames before triggering a link up
event. This can cause the link to be stuck low when there's traffic on
the interface, so disable this feature.

Fixes: 4bb043262878 ("net: mvpp2: phylink support")
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c b/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
index 50ed1bdb632db..885529701de90 100644
--- a/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
+++ b/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
@@ -4580,9 +4580,9 @@ static void mvpp2_xlg_config(struct mvpp2_port *port, unsigned int mode,
else
ctrl0 &= ~MVPP22_XLG_CTRL0_RX_FLOW_CTRL_EN;

- ctrl4 &= ~MVPP22_XLG_CTRL4_MACMODSELECT_GMAC;
- ctrl4 |= MVPP22_XLG_CTRL4_FWD_FC | MVPP22_XLG_CTRL4_FWD_PFC |
- MVPP22_XLG_CTRL4_EN_IDLE_CHECK;
+ ctrl4 &= ~(MVPP22_XLG_CTRL4_MACMODSELECT_GMAC |
+ MVPP22_XLG_CTRL4_EN_IDLE_CHECK);
+ ctrl4 |= MVPP22_XLG_CTRL4_FWD_FC | MVPP22_XLG_CTRL4_FWD_PFC;

if (old_ctrl0 != ctrl0)
writel(ctrl0, port->base + MVPP22_XLG_CTRL0_REG);
--
2.20.1
\
 
 \ /
  Last update: 2019-08-14 04:12    [W:0.284 / U:0.584 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site