lkml.org 
[lkml]   [2019]   [Aug]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCHv3] drivers/amba: add reset control to amba bus probe
+Russell

On Thu, Aug 8, 2019 at 8:02 AM Dinh Nguyen <dinguyen@kernel.org> wrote:
>
> The primecell controller on some SoCs, i.e. SoCFPGA, is held in reset by
> default. Until recently, the DMA controller was brought out of reset by the
> bootloader(i.e. U-Boot). But a recent change in U-Boot, the peripherals that
> are not used are held in reset and are left to Linux to bring them out of
> reset.
>
> Add a mechanism for getting the reset property and de-assert the primecell
> module from reset if found. This is a not a hard fail if the reset property
> is not present in the device tree node, so the driver will continue to probe.
>
> Because there are different variants of the controller that may have multiple
> reset signals, the code will find all reset(s) specified and de-assert them.
>
> Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
> ---
> v3: add a reset_control_put()
> add error handling for -EPROBE_DEFER
> v2: move reset control to bus code
> find all reset properties and de-assert them
> ---
> drivers/amba/bus.c | 23 +++++++++++++++++++++++
> 1 file changed, 23 insertions(+)
>
> diff --git a/drivers/amba/bus.c b/drivers/amba/bus.c
> index 100e798a5c82..00e68ea416ca 100644
> --- a/drivers/amba/bus.c
> +++ b/drivers/amba/bus.c
> @@ -18,6 +18,7 @@
> #include <linux/limits.h>
> #include <linux/clk/clk-conf.h>
> #include <linux/platform_device.h>
> +#include <linux/reset.h>
>
> #include <asm/irq.h>
>
> @@ -401,6 +402,28 @@ static int amba_device_try_add(struct amba_device *dev, struct resource *parent)
> ret = amba_get_enable_pclk(dev);
> if (ret == 0) {
> u32 pid, cid;
> + int count;
> + struct reset_control *rstc;
> +
> + /*
> + * Find reset control(s) of the amba bus and de-assert them.
> + */
> + count = reset_control_get_count(&dev->dev);
> + while (count > 0) {
> + rstc = of_reset_control_get_shared_by_index(dev->dev.of_node, count - 1);
> + if (IS_ERR(rstc)) {
> + if (PTR_ERR(rstc) == -EPROBE_DEFER) {
> + ret = -EPROBE_DEFER;
> + } else {
> + dev_err(&dev->dev, "Can't get amba reset!\n");
> + }
> + break;
> + } else {

You can remove the else here and save some indentation on the rest.

Otherwise,

Reviewed-by: Rob Herring <robh@kernel.org>


> + reset_control_deassert(rstc);
> + reset_control_put(rstc);
> + count--;
> + }
> + }
>
> /*
> * Read pid and cid based on size of resource
> --
> 2.20.0
>

\
 
 \ /
  Last update: 2019-08-13 23:50    [W:0.034 / U:8.104 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site