lkml.org 
[lkml]   [2019]   [Aug]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v6 1/4] dt-bindings: net: phy: Add subnode for LED configuration
On Tue, Aug 13, 2019 at 12:11:44PM -0700, Matthias Kaehlcke wrote:
> The LED behavior of some Ethernet PHYs is configurable. Add an
> optional 'leds' subnode with a child node for each LED to be
> configured. The binding aims to be compatible with the common
> LED binding (see devicetree/bindings/leds/common.txt).
>
> A LED can be configured to be:
>
> - 'on' when a link is active, some PHYs allow configuration for
> certain link speeds
> speeds
> - 'off'
> - blink on RX/TX activity, some PHYs allow configuration for
> certain link speeds
>
> For the configuration to be effective it needs to be supported by
> the hardware and the corresponding PHY driver.
>
> Suggested-by: Andrew Lunn <andrew@lunn.ch>
> Signed-off-by: Matthias Kaehlcke <mka@chromium.org>

Reviewed-by: Andrew Lunn <andrew@lunn.ch>

Andrew

\
 
 \ /
  Last update: 2019-08-13 21:55    [W:0.060 / U:2.120 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site