lkml.org 
[lkml]   [2019]   [Aug]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v5 08/18] thermal: sun8i: support mod clocks
On Mon, Aug 12, 2019 at 4:46 PM Frank Lee <tiny.windzz@gmail.com> wrote:
>
> HI Vasily,
>
> On Sat, Aug 10, 2019 at 2:17 PM Vasily Khoruzhick <anarsoul@gmail.com> wrote:
> >
> > On Fri, Aug 9, 2019 at 10:31 PM Yangtao Li <tiny.windzz@gmail.com> wrote:
> > >
> > > H3 has extra clock, so introduce something in ths_thermal_chip/ths_device
> > > and adds the process of the clock.
> > >
> > > This is pre-work for supprt it.
> > >
> > > Signed-off-by: Yangtao Li <tiny.windzz@gmail.com>
> > > ---
> > > drivers/thermal/sun8i_thermal.c | 17 ++++++++++++++++-
> > > 1 file changed, 16 insertions(+), 1 deletion(-)
> > >
> > > diff --git a/drivers/thermal/sun8i_thermal.c b/drivers/thermal/sun8i_thermal.c
> > > index b934bc81eba7..6f4294c2aba7 100644
> > > --- a/drivers/thermal/sun8i_thermal.c
> > > +++ b/drivers/thermal/sun8i_thermal.c
> > > @@ -54,6 +54,7 @@ struct tsensor {
> > > };
> > >
> > > struct ths_thermal_chip {
> > > + bool has_mod_clk;
> > > int sensor_num;
> > > int offset;
> > > int scale;
> > > @@ -69,6 +70,7 @@ struct ths_device {
> > > struct regmap *regmap;
> > > struct reset_control *reset;
> > > struct clk *bus_clk;
> > > + struct clk *mod_clk;
> > > struct tsensor sensor[MAX_SENSOR_NUM];
> > > };
> > >
> > > @@ -274,6 +276,12 @@ static int sun8i_ths_resource_init(struct ths_device *tmdev)
> > > if (IS_ERR(tmdev->bus_clk))
> > > return PTR_ERR(tmdev->bus_clk);
> > >
> > > + if (tmdev->chip->has_mod_clk) {
> > > + tmdev->mod_clk = devm_clk_get(&pdev->dev, "mod");
> > > + if (IS_ERR(tmdev->mod_clk))
> > > + return PTR_ERR(tmdev->mod_clk);
> > > + }
> > > +
> > > ret = reset_control_deassert(tmdev->reset);
> > > if (ret)
> > > return ret;
> > > @@ -282,12 +290,18 @@ static int sun8i_ths_resource_init(struct ths_device *tmdev)
> > > if (ret)
> > > goto assert_reset;
> > >
> > > - ret = sun50i_ths_calibrate(tmdev);
> > > + ret = clk_prepare_enable(tmdev->mod_clk);
> >
> > You have to set rate of modclk before enabling it since you can't rely
> > on whatever bootloader left for you.
> >
> > Also I found that parameters you're using for PC_TEMP_PERIOD, ACQ0 and
> > ACQ1 are too aggressive and may result in high interrupt rate to the
> > point when it may stall RCU. I changed driver a bit to use params from
> > Philipp Rossak's work (modclk set to 4MHz, PC_TEMP_PERIOD is 7, ACQ0
> > is 255, ACQ1 is 63) and it fixed RCU stalls for me, see [1] for
> > details.
>
> Why is the RCU stall happening, is it caused by a deadlock?
> Can you provide log information and your configuration?
> I am a bit curious.

It's not deadlock, I believe it just can't handle that many interrupts
when running at lowest CPU frequency. Even with Philipp's settings
there's ~20 interrupts a second from ths. I don't remember how many
interrupts were there with your settings.

Unfortunately there's nothing interesting in backtraces, I'm using
Pine64-LTS board.

> Thx,
> Yangtao
>
> >
> > [1] https://github.com/anarsoul/linux-2.6/commit/46b8bb0fe2ccd1cd88fa9181a2ecbf79e8d513b2
> >
> >
> > > if (ret)
> > > goto bus_disable;
> > >
> > > + ret = sun50i_ths_calibrate(tmdev);
> > > + if (ret)
> > > + goto mod_disable;
> > > +
> > > return 0;
> > >
> > > +mod_disable:
> > > + clk_disable_unprepare(tmdev->mod_clk);
> > > bus_disable:
> > > clk_disable_unprepare(tmdev->bus_clk);
> > > assert_reset:
> > > @@ -395,6 +409,7 @@ static int sun8i_ths_remove(struct platform_device *pdev)
> > > {
> > > struct ths_device *tmdev = platform_get_drvdata(pdev);
> > >
> > > + clk_disable_unprepare(tmdev->mod_clk);
> > > clk_disable_unprepare(tmdev->bus_clk);
> > > reset_control_assert(tmdev->reset);
> > >
> > > --
> > > 2.17.1
> > >
> > >
> > > _______________________________________________
> > > linux-arm-kernel mailing list
> > > linux-arm-kernel@lists.infradead.org
> > > http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

\
 
 \ /
  Last update: 2019-08-13 01:55    [W:0.116 / U:9.524 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site