lkml.org 
[lkml]   [2019]   [Aug]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH 4/5] watchdog: ziirave_wdt: Don't bail out on unexpected timeout value
On Wed, Jul 31, 2019 at 11:09 AM Guenter Roeck <linux@roeck-us.net> wrote:
>
> On Wed, Jul 31, 2019 at 10:42:51AM -0700, Andrey Smirnov wrote:
> > Reprogramming bootloader on watchdog MCU will result in reported
> > default timeout value of "0". That in turn will be unnecesarily
>
> unnecessarily
>
> > rejected by the driver as invalid device (-ENODEV). Simplify probe to
> > just read stored timeout value, clamp it to an acceptable range and
> > program the value unconditionally to fix the above.
> >
> > Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
> > Cc: Chris Healy <cphealy@gmail.com>
> > Cc: Guenter Roeck <linux@roeck-us.net>
> > Cc: Rick Ramstetter <rick@anteaterllc.com>
> > Cc: linux-watchdog@vger.kernel.org
> > Cc: linux-kernel@vger.kernel.org
> > ---
> > drivers/watchdog/ziirave_wdt.c | 22 +++++++++-------------
> > 1 file changed, 9 insertions(+), 13 deletions(-)
> >
> > diff --git a/drivers/watchdog/ziirave_wdt.c b/drivers/watchdog/ziirave_wdt.c
> > index 89ce6982ba53..33c8d2eadada 100644
> > --- a/drivers/watchdog/ziirave_wdt.c
> > +++ b/drivers/watchdog/ziirave_wdt.c
> > @@ -667,22 +667,18 @@ static int ziirave_wdt_probe(struct i2c_client *client,
> > return val;
> > }
> >
> > - if (val < ZIIRAVE_TIMEOUT_MIN)
> > - return -ENODEV;
> > -
> > - w_priv->wdd.timeout = val;
> > - } else {
> > - ret = ziirave_wdt_set_timeout(&w_priv->wdd,
> > - w_priv->wdd.timeout);
> > - if (ret) {
> > - dev_err(&client->dev, "Failed to set timeout\n");
> > - return ret;
> > - }
> > + w_priv->wdd.timeout = clamp(val, ZIIRAVE_TIMEOUT_MIN,
> > + ZIIRAVE_TIMEOUT_MAX);
>
> Are you sure ? Effectively that will set the timeout to the minimum,
> ie three seconds. It might be better to define and set some default.
> Your call, of course.
>

It doesn't really matter in my use-case (set timeout is a no-op), but
it sounds like a better approach, so I'll change it in v2.

Thanks,
Andrey Smirnov

\
 
 \ /
  Last update: 2019-08-10 23:18    [W:0.077 / U:0.620 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site