lkml.org 
[lkml]   [2019]   [Aug]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 3/8] ARM: dts: eukrea-mbimxsd27: native-mode is part of display-timings
Date
Move the native-mode property inside the display-timings node.

According to
Documentation/devicetree/bindings/display/panel/display-timing.txt.
native-mode is a property of the display-timings node.

If it's located outside of display-timings, the native-mode setting is
ignored and the first display timing is used (which is a problem only if
someone adds another display timing).

Signed-off-by: Martin Kaiser <martin@kaiser.cx>
---
arch/arm/boot/dts/imx27-eukrea-mbimxsd27-baseboard.dts | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/imx27-eukrea-mbimxsd27-baseboard.dts b/arch/arm/boot/dts/imx27-eukrea-mbimxsd27-baseboard.dts
index 84fc8df4be7c..9c3ec82ec7e5 100644
--- a/arch/arm/boot/dts/imx27-eukrea-mbimxsd27-baseboard.dts
+++ b/arch/arm/boot/dts/imx27-eukrea-mbimxsd27-baseboard.dts
@@ -11,11 +11,11 @@

display0: CMO-QVGA {
model = "CMO-QVGA";
- native-mode = <&timing0>;
bits-per-pixel = <16>;
fsl,pcr = <0xfad08b80>;

display-timings {
+ native-mode = <&timing0>;
timing0: 320x240 {
clock-frequency = <6500000>;
hactive = <320>;
--
2.11.0
\
 
 \ /
  Last update: 2019-08-01 17:48    [W:0.143 / U:0.080 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site