lkml.org 
[lkml]   [2019]   [Aug]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 2/3] dt: lm3532: Add property for full scale current.
Date
Add a property for each control bank to configure the
full scale current setting for the device.

Signed-off-by: Dan Murphy <dmurphy@ti.com>
---
Documentation/devicetree/bindings/leds/leds-lm3532.txt | 4 ++++
1 file changed, 4 insertions(+)

diff --git a/Documentation/devicetree/bindings/leds/leds-lm3532.txt b/Documentation/devicetree/bindings/leds/leds-lm3532.txt
index c087f85ddddc..d3498dd24e8e 100644
--- a/Documentation/devicetree/bindings/leds/leds-lm3532.txt
+++ b/Documentation/devicetree/bindings/leds/leds-lm3532.txt
@@ -62,6 +62,9 @@ Optional LED child properties:
- label : see Documentation/devicetree/bindings/leds/common.txt
- linux,default-trigger :
see Documentation/devicetree/bindings/leds/common.txt
+ - ti,fs-current : Defines the full scale current value for each control
+ bank. The range is from 5000uA-29800uA in increments
+ of 800uA.

Example:
led-controller@38 {
@@ -85,6 +88,7 @@ led-controller@38 {
reg = <0>;
led-sources = <2>;
ti,led-mode = <1>;
+ ti,fs-current = <21800>;
label = ":backlight";
linux,default-trigger = "backlight";
};
--
2.22.0.214.g8dca754b1e
\
 
 \ /
  Last update: 2019-08-01 17:15    [W:0.185 / U:0.248 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site