lkml.org 
[lkml]   [2019]   [Jul]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v3 1/2] dt-bindings: soc: add mtk svs dt-bindings
On Fri, Jun 21, 2019 at 04:43:47PM +0800, Roger Lu wrote:
> Document the binding for enabling mtk svs on MediaTek SoC.
>
> Signed-off-by: Roger Lu <roger.lu@mediatek.com>
> ---
> .../devicetree/bindings/power/mtk-svs.txt | 88 +++++++++++++++++++
> 1 file changed, 88 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/power/mtk-svs.txt
>
> diff --git a/Documentation/devicetree/bindings/power/mtk-svs.txt b/Documentation/devicetree/bindings/power/mtk-svs.txt
> new file mode 100644
> index 000000000000..6a71992ef162
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/power/mtk-svs.txt
> @@ -0,0 +1,88 @@
> +* Mediatek Smart Voltage Scaling (MTK SVS)
> +
> +This describes the device tree binding for the MTK SVS controller (bank)
> +which helps provide the optimized CPU/GPU/CCI voltages. This device also
> +needs thermal data to calculate thermal slope for accurately compensate
> +the voltages when temperature change.
> +
> +Required properties:
> +- compatible:
> + - "mediatek,mt8183-svs" : For MT8183 family of SoCs
> +- reg: Address range of the MTK SVS controller.
> +- interrupts: IRQ for the MTK SVS controller.
> +- clocks, clock-names: Clocks needed for the svs controller. required
> + clocks are:
> + "main_clk": Main clock needed for register access

'_clk' is redundant and can be dropped.

> +- nvmem-cells: Phandle to the calibration data provided by a nvmem device.
> +- nvmem-cell-names: Should be "svs-calibration-data" and "calibration-data"
> +
> +Subnodes:
> +- svs_cpu_little: SVS bank device node of little CPU
> + compatible: "mediatek,mt8183-svs-cpu-little"
> + operating-points-v2: OPP table hooked by SVS little CPU bank.
> + SVS will optimze this OPP table voltage part.
> + vcpu-little-supply: PMIC buck of little CPU
> +- svs_cpu_big: SVS bank device node of big CPU
> + compatible: "mediatek,mt8183-svs-cpu-big"
> + operating-points-v2: OPP table hooked by SVS big CPU bank.
> + SVS will optimze this OPP table voltage part.
> + vcpu-big-supply: PMIC buck of big CPU
> +- svs_cci: SVS bank device node of CCI
> + compatible: "mediatek,mt8183-svs-cci"
> + operating-points-v2: OPP table hooked by SVS CCI bank.
> + SVS will optimze this OPP table voltage part.
> + vcci-supply: PMIC buck of CCI
> +- svs_gpu: SVS bank device node of GPU
> + compatible: "mediatek,mt8183-svs-gpu"
> + operating-points-v2: OPP table hooked by SVS GPU bank.
> + SVS will optimze this OPP table voltage part.
> + vgpu-spply: PMIC buck of GPU

typo

> +
> +Example:
> +
> + svs: svs@1100b000 {
> + compatible = "mediatek,mt8183-svs";
> + reg = <0 0x1100b000 0 0x1000>;
> + interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_LOW 0>;
> + clocks = <&infracfg CLK_INFRA_THERM>;
> + clock-names = "main_clk";
> + nvmem-cells = <&svs_calibration>, <&thermal_calibration>;
> + nvmem-cell-names = "svs-calibration-data", "calibration-data";
> +
> + svs_cpu_little: svs_cpu_little {
> + compatible = "mediatek,mt8183-svs-cpu-little";
> + operating-points-v2 = <&cluster0_opp>;
> + };
> +
> + svs_cpu_big: svs_cpu_big {
> + compatible = "mediatek,mt8183-svs-cpu-big";
> + operating-points-v2 = <&cluster1_opp>;
> + };
> +
> + svs_cci: svs_cci {
> + compatible = "mediatek,mt8183-svs-cci";
> + operating-points-v2 = <&cci_opp>;
> + };
> +
> + svs_gpu: svs_gpu {
> + compatible = "mediatek,mt8183-svs-gpu";
> + power-domains = <&scpsys MT8183_POWER_DOMAIN_MFG_2D>;
> + operating-points-v2 = <&gpu_opp_table>;
> + };

This all looks like redundant data which can be found in the cpu, gpu,
etc. nodes. Can't you parse those nodes to get the information?

> + };
> +
> + &svs_cpu_little {
> + vcpu-little-supply = <&mt6358_vproc12_reg>;

Don't split examples like this. Just should one flat example.

> + };
> +
> + &svs_cpu_big {
> + vcpu-big-supply = <&mt6358_vproc11_reg>;
> + };
> +
> + &svs_cci {
> + vcci-supply = <&mt6358_vproc12_reg>;
> + };
> +
> + &svs_gpu {
> + vgpu-spply = <&mt6358_vgpu_reg>;
> + };
> --
> 2.18.0
>

\
 
 \ /
  Last update: 2019-07-09 23:48    [W:0.061 / U:0.532 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site