lkml.org 
[lkml]   [2019]   [Jul]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 4/4] backlight: add led-backlight driver
On Mon, Jul 08, 2019 at 12:27:00PM +0200, Jean-Jacques Hiblot wrote:
> From: Tomi Valkeinen <tomi.valkeinen@ti.com>
>
> This patch adds a led-backlight driver (led_bl), which is similar to
> pwm_bl except the driver uses a LED class driver to adjust the
> brightness in the HW. Multiple LEDs can be used for a single backlight.
>
> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
> Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
> ---
> drivers/video/backlight/Kconfig | 7 +
> drivers/video/backlight/Makefile | 1 +
> drivers/video/backlight/led_bl.c | 235 +++++++++++++++++++++++++++++++
> 3 files changed, 243 insertions(+)
> create mode 100644 drivers/video/backlight/led_bl.c

> diff --git a/drivers/video/backlight/led_bl.c b/drivers/video/backlight/led_bl.c
> new file mode 100644
> index 000000000000..7644277cfdbb
> --- /dev/null
> +++ b/drivers/video/backlight/led_bl.c
> @@ -0,0 +1,235 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (C) 2015-2019 Texas Instruments Incorporated - http://www.ti.com/
> + * Author: Tomi Valkeinen <tomi.valkeinen@ti.com>
> + *
> + * Based on pwm_bl.c
> + */
> +
> +#include <linux/backlight.h>
> +#include <linux/gpio/consumer.h>

Header should no longer be needed.

> +static int led_bl_probe(struct platform_device *pdev)
> +{
> + struct backlight_properties props;
> + struct led_bl_data *priv;
> + int ret;
> + int i;
> +
> + priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
> + if (!priv)
> + return -ENOMEM;
> +
> + platform_set_drvdata(pdev, priv);
> +
> + priv->dev = &pdev->dev;
> +
> + ret = led_bl_parse_dt(&pdev->dev, priv);
> + if (ret < 0) {
> + dev_err(&pdev->dev, "failed to parse DT data\n");
> + return ret;
> + }
> + priv->leds = devm_kzalloc(&pdev->dev,
> + sizeof(struct led_classdev *) * priv->nb_leds,
> + GFP_KERNEL);
> + if (!priv->leds)
> + return -ENOMEM;
> +
> + for (i = 0; i < priv->nb_leds; i++) {
> + priv->leds[i] = devm_led_get(&pdev->dev, i);
> + if (IS_ERR(priv->leds[i]))
> + return PTR_ERR(priv->leds[i]);
> + }
> +
> + memset(&props, 0, sizeof(struct backlight_properties));
> + props.type = BACKLIGHT_RAW;
> + props.max_brightness = priv->max_brightness;
> + priv->bl_dev = backlight_device_register(dev_name(&pdev->dev),
> + &pdev->dev, priv, &led_bl_ops, &props);
> + if (IS_ERR(priv->bl_dev)) {
> + dev_err(&pdev->dev, "failed to register backlight\n");
> + ret = PTR_ERR(priv->bl_dev);
> + goto err;

goto is pointless for a pure-devm function.

> + }
> +
> + priv->bl_dev->props.brightness = priv->default_brightness;
> + backlight_update_status(priv->bl_dev);

This will light up the backlight during backlight probe.

Can you take a look at pwm_backlight_initial_power_state() and decide
how much of it applies to an LED based backlight (the phandle stuff
certainly does).


Daniel.

\
 
 \ /
  Last update: 2019-07-09 11:32    [W:0.073 / U:0.204 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site