lkml.org 
[lkml]   [2019]   [Jul]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH v9 00/10] namei: openat2(2) path resolution restrictions
Date
Patch changelog:
v9:
* Replace resolveat(2) with openat2(2). [Linus]
* Output a warning to dmesg if may_open_magiclink() is violated.
* Add an openat2(O_CREAT) testcase.
v8:
* Default to O_CLOEXEC to match other new fd-creation syscalls
(users can always disable O_CLOEXEC afterwards). [Christian]
* Implement magic-link restrictions based on their mode. This is
done through a series of masks and is designed to avoid breaking
users -- most users don't have chained O_PATH fd re-opens.
* Add O_EMPTYPATH which allows for fd re-opening without needing
procfs. This would help some users of fd re-opening, and with the
changes to magic-link permissions we now have the right semantics
for such a flag.
* Add selftests for resolveat(2), O_EMPTYPATH, and the magic-link
mode semantics.
v7:
* Remove execveat(2) support for these flags since it might
result in some pretty hairy security issues with setuid binaries.
There are other avenues we can go down to solve the issues with
CVE-2019-5736. [Jann]
* Reserve an additional bit in resolveat(2) for the eXecute access
mode if we end up implementing it.
v6:
* Drop O_* flags API to the new LOOKUP_ path scoping bits and
instead introduce resolveat(2) as an alternative method of
obtaining an O_PATH. The justification for this is included in
patch 6 (though switching back to O_* flags is trivial).
v5:
* In response to CVE-2019-5736 (one of the vectors showed that
open(2)+fexec(3) cannot be used to scope binfmt_script's implicit
open_exec()), AT_* flags have been re-added and are now piped
through to binfmt_script (and other binfmt_* that use open_exec)
but are only supported for execveat(2) for now.
v4:
* Remove AT_* flag reservations, as they require more discussion.
* Switch to path_is_under() over __d_path() for breakout checking.
* Make O_XDEV no longer block openat("/tmp", "/", O_XDEV) -- dirfd
is now ignored for absolute paths to match other flags.
* Improve the dirfd_path_init() refactor and move it to a separate
commit.
* Remove reference to Linux-capsicum.
* Switch "proclink" name to magic-link.
v3: [resend]
v2:
* Made ".." resolution with AT_THIS_ROOT and AT_BENEATH safe(r) with
some semi-aggressive __d_path checking (see patch 3).
* Disallowed "proclinks" with AT_THIS_ROOT and AT_BENEATH, in the
hopes they can be re-enabled once safe.
* Removed the selftests as they will be reimplemented as xfstests.
* Removed stat(2) support, since you can already get it through
O_PATH and fstatat(2).

The need for some sort of control over VFS's path resolution (to avoid
malicious paths resulting in inadvertent breakouts) has been a very
long-standing desire of many userspace applications. This patchset is a
revival of Al Viro's old AT_NO_JUMPS[1,2] patchset (which was a variant
of David Drysdale's O_BENEATH patchset[3] which was a spin-off of the
Capsicum project[4]) with a few additions and changes made based on the
previous discussion within [5] as well as others I felt were useful.

In line with the conclusions of the original discussion of AT_NO_JUMPS,
the flag has been split up into separate flags. However, instead of
being an openat(2) flag it is provided through a new syscall openat2(2)
which provides an alternative way to get an O_PATH file descriptor (the
reasoning for doing this is included in patch 6). The following new
LOOKUP_ flags are added:

* LOOKUP_XDEV blocks all mountpoint crossings (upwards, downwards, or
through absolute links). Absolute pathnames alone in openat(2) do
not trigger this.

* LOOKUP_NO_MAGICLINKS blocks resolution through /proc/$pid/fd-style
links. This is done by blocking the usage of nd_jump_link() during
resolution in a filesystem. The term "magic-links" is used to match
with the only reference to these links in Documentation/, but I'm
happy to change the name.

It should be noted that this is different to the scope of
~LOOKUP_FOLLOW in that it applies to all path components. However,
you can do openat2(NO_FOLLOW|NO_MAGICLINKS) on a magic-link and it
will *not* fail (assuming that no parent component was a
magic-link), and you will have an fd for the magic-link.

* LOOKUP_BENEATH disallows escapes to outside the starting dirfd's
tree, using techniques such as ".." or absolute links. Absolute
paths in openat(2) are also disallowed. Conceptually this flag is to
ensure you "stay below" a certain point in the filesystem tree --
but this requires some additional to protect against various races
that would allow escape using "..".

Currently LOOKUP_BENEATH implies LOOKUP_NO_MAGICLINKS, because it
can trivially beam you around the filesystem (breaking the
protection). In future, there might be similar safety checks done as
in LOOKUP_IN_ROOT, but that requires more discussion.

In addition, two new flags are added that expand on the above ideas:

* LOOKUP_NO_SYMLINKS does what it says on the tin. No symlink
resolution is allowed at all, including magic-links. Just as with
LOOKUP_NO_MAGICLINKS this can still be used with NOFOLLOW to open an
fd for the symlink as long as no parent path had a symlink
component.

* LOOKUP_IN_ROOT is an extension of LOOKUP_BENEATH that, rather than
blocking attempts to move past the root, forces all such movements
to be scoped to the starting point. This provides chroot(2)-like
protection but without the cost of a chroot(2) for each filesystem
operation, as well as being safe against race attacks that chroot(2)
is not.

If a race is detected (as with LOOKUP_BENEATH) then an error is
generated, and similar to LOOKUP_BENEATH it is not permitted to cross
magic-links with LOOKUP_IN_ROOT.

The primary need for this is from container runtimes, which
currently need to do symlink scoping in userspace[6] when opening
paths in a potentially malicious container. There is a long list of
CVEs that could have bene mitigated by having O_THISROOT (such as
CVE-2017-1002101, CVE-2017-1002102, CVE-2018-15664, and
CVE-2019-5736, just to name a few).

And further, several semantics of file descriptor "re-opening" are now
changed to prevent attacks like CVE-2019-5736 by restricting how
magic-links can be resolved (based on their mode). This required some
other changes to the semantics of the modes of O_PATH file descriptor's
associated /proc/self/fd magic-links. openat2(2) has the ability to
further restrict re-opening of its own O_PATH fds, so that users can
make even better use of this feature.

Finally, O_EMPTYPATH was added so that users can do /proc/self/fd-style
re-opening without depending on procfs. The new restricted semantics for
magic-links are applied here too.

In order to make all of the above more usable, I'm working on
libpathrs[7] which is a C-friendly library for safe path resolution. It
features a userspace-emulated backend if the kernel doesn't support
openat2(2). Hopefully we can get userspace to switch to using it, and
thus get openat2(2) support for free once it's ready.

Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: David Howells <dhowells@redhat.com>
Cc: Jann Horn <jannh@google.com>
Cc: Christian Brauner <christian@brauner.io>
Cc: David Drysdale <drysdale@google.com>
Cc: Tycho Andersen <tycho@tycho.ws>
Cc: Kees Cook <keescook@chromium.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: <containers@lists.linux-foundation.org>
Cc: <linux-fsdevel@vger.kernel.org>
Cc: <linux-api@vger.kernel.org>

[1]: https://lwn.net/Articles/721443/
[2]: https://lore.kernel.org/patchwork/patch/784221/
[3]: https://lwn.net/Articles/619151/
[4]: https://lwn.net/Articles/603929/
[5]: https://lwn.net/Articles/723057/
[6]: https://github.com/cyphar/filepath-securejoin
[7]: https://github.com/openSUSE/libpathrs

Aleksa Sarai (10):
namei: obey trailing magic-link DAC permissions
procfs: switch magic-link modes to be more sane
open: O_EMPTYPATH: procfs-less file descriptor re-opening
namei: split out nd->dfd handling to dirfd_path_init
namei: O_BENEATH-style path resolution flags
namei: LOOKUP_IN_ROOT: chroot-like path resolution
namei: aggressively check for nd->root escape on ".." resolution
open: openat2(2) syscall
kselftest: save-and-restore errno to allow for %m formatting
selftests: add openat2(2) selftests

arch/alpha/kernel/syscalls/syscall.tbl | 1 +
arch/arm/tools/syscall.tbl | 1 +
arch/arm64/include/asm/unistd.h | 2 +-
arch/arm64/include/asm/unistd32.h | 2 +
arch/ia64/kernel/syscalls/syscall.tbl | 1 +
arch/m68k/kernel/syscalls/syscall.tbl | 1 +
arch/microblaze/kernel/syscalls/syscall.tbl | 1 +
arch/mips/kernel/syscalls/syscall_n32.tbl | 1 +
arch/mips/kernel/syscalls/syscall_n64.tbl | 1 +
arch/mips/kernel/syscalls/syscall_o32.tbl | 1 +
arch/parisc/kernel/syscalls/syscall.tbl | 1 +
arch/powerpc/kernel/syscalls/syscall.tbl | 1 +
arch/s390/kernel/syscalls/syscall.tbl | 1 +
arch/sh/kernel/syscalls/syscall.tbl | 1 +
arch/sparc/kernel/syscalls/syscall.tbl | 1 +
arch/x86/entry/syscalls/syscall_32.tbl | 1 +
arch/x86/entry/syscalls/syscall_64.tbl | 1 +
arch/xtensa/kernel/syscalls/syscall.tbl | 1 +
fs/fcntl.c | 2 +-
fs/internal.h | 1 +
fs/namei.c | 333 ++++++++++++---
fs/open.c | 140 +++++--
fs/proc/base.c | 20 +-
fs/proc/fd.c | 23 +-
fs/proc/namespaces.c | 2 +-
include/linux/fcntl.h | 17 +-
include/linux/fs.h | 8 +-
include/linux/namei.h | 8 +
include/linux/syscalls.h | 14 +-
include/uapi/asm-generic/fcntl.h | 5 +
include/uapi/asm-generic/unistd.h | 5 +-
include/uapi/linux/fcntl.h | 38 ++
tools/testing/selftests/Makefile | 1 +
tools/testing/selftests/kselftest.h | 15 +
tools/testing/selftests/memfd/memfd_test.c | 7 +-
tools/testing/selftests/openat2/.gitignore | 1 +
tools/testing/selftests/openat2/Makefile | 12 +
tools/testing/selftests/openat2/helpers.c | 162 +++++++
tools/testing/selftests/openat2/helpers.h | 114 +++++
.../testing/selftests/openat2/linkmode_test.c | 325 ++++++++++++++
.../selftests/openat2/rename_attack_test.c | 124 ++++++
.../testing/selftests/openat2/resolve_test.c | 395 ++++++++++++++++++
42 files changed, 1667 insertions(+), 125 deletions(-)
create mode 100644 tools/testing/selftests/openat2/.gitignore
create mode 100644 tools/testing/selftests/openat2/Makefile
create mode 100644 tools/testing/selftests/openat2/helpers.c
create mode 100644 tools/testing/selftests/openat2/helpers.h
create mode 100644 tools/testing/selftests/openat2/linkmode_test.c
create mode 100644 tools/testing/selftests/openat2/rename_attack_test.c
create mode 100644 tools/testing/selftests/openat2/resolve_test.c

--
2.22.0

\
 
 \ /
  Last update: 2019-07-06 16:59    [W:0.147 / U:1.876 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site