lkml.org 
[lkml]   [2019]   [Jul]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRE: [PATCH V3 1/2] dt-bindings: reset: imx7: Add support for i.MX8MM
Date
Hi, Philipp

> On Thu, 2019-07-04 at 17:44 +0800, Anson.Huang@nxp.com wrote:
> > From: Anson Huang <Anson.Huang@nxp.com>
> >
> > i.MX8MM can reuse i.MX8MQ's reset driver, update the compatible
> > property and related info to support i.MX8MM.
> >
> > Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
> > ---
> > Changes since V2:
> > - Add separate line for i.MX8MM in case anything different later for
> i.MX8MM.
> > ---
> > Documentation/devicetree/bindings/reset/fsl,imx7-src.txt | 6 ++++--
> > 1 file changed, 4 insertions(+), 2 deletions(-)
> >
> > diff --git a/Documentation/devicetree/bindings/reset/fsl,imx7-src.txt
> > b/Documentation/devicetree/bindings/reset/fsl,imx7-src.txt
> > index 13e0951..c2489e4 100644
> > --- a/Documentation/devicetree/bindings/reset/fsl,imx7-src.txt
> > +++ b/Documentation/devicetree/bindings/reset/fsl,imx7-src.txt
> > @@ -8,6 +8,7 @@ Required properties:
> > - compatible:
> > - For i.MX7 SoCs should be "fsl,imx7d-src", "syscon"
> > - For i.MX8MQ SoCs should be "fsl,imx8mq-src", "syscon"
> > + - For i.MX8MM SoCs should be "fsl,imx8mm-src", "fsl,imx8mq-src",
> "syscon"
> > - reg: should be register base and length as documented in the
> > datasheet
> > - interrupts: Should contain SRC interrupt @@ -46,5 +47,6 @@ Example:
> >
> >
> > For list of all valid reset indices see
> > -<dt-bindings/reset/imx7-reset.h> for i.MX7 and
> > -<dt-bindings/reset/imx8mq-reset.h> for i.MX8MQ
> > +<dt-bindings/reset/imx7-reset.h> for i.MX7,
> > +<dt-bindings/reset/imx8mq-reset.h> for i.MX8MQ and
> > +<dt-bindings/reset/imx8mq-reset.h> for i.MX8MM
>
> The last line is misleading, as that file contains reset indices that are invalid
> for i.MX8MM.

What is your suggestion about this line? Just NOT change it? Or adding a new file
imx8mm-reset.h but still use the IMX8MQ_RESET_ as prefix ? Or keep what I changed, but
adding some comments in those macros that i.MX8MM does NOT support?

Thanks,
Anson.

>
> regards
> Philipp
\
 
 \ /
  Last update: 2019-07-05 02:27    [W:0.078 / U:0.024 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site