lkml.org 
[lkml]   [2019]   [Jul]   [31]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v4 2/2] RISC-V: Implement sparsemem
Hi Logan,

Logan Gunthorpe <logang@deltatee.com> 於 2019年1月10日 週四 上午5:07寫道:
>
> This patch implements sparsemem support for risc-v which helps pave the
> way for memory hotplug and eventually P2P support.
>
> We introduce Kconfig options for virtual and physical address bits which
> are used to calculate the size of the vmemmap and set the
> MAX_PHYSMEM_BITS.
>
> The vmemmap is located directly before the VMALLOC region and sized
> such that we can allocate enough pages to populate all the virtual
> address space in the system (similar to the way it's done in arm64).
>
> During initialization, call memblocks_present() and sparse_init(),
> and provide a stub for vmemmap_populate() (all of which is similar to
> arm64).
>
> Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
> Reviewed-by: Palmer Dabbelt <palmer@sifive.com>
> Cc: Albert Ou <aou@eecs.berkeley.edu>
> Cc: Andrew Waterman <andrew@sifive.com>
> Cc: Olof Johansson <olof@lixom.net>
> Cc: Michael Clark <michaeljclark@mac.com>
> Cc: Rob Herring <robh@kernel.org>
> Cc: Zong Li <zong@andestech.com>
> ---
> arch/riscv/Kconfig | 23 +++++++++++++++++++++++
> arch/riscv/include/asm/pgtable.h | 21 +++++++++++++++++----
> arch/riscv/include/asm/sparsemem.h | 11 +++++++++++
> arch/riscv/kernel/setup.c | 4 +++-
> arch/riscv/mm/init.c | 8 ++++++++
> 5 files changed, 62 insertions(+), 5 deletions(-)
> create mode 100644 arch/riscv/include/asm/sparsemem.h
>
> diff --git a/arch/riscv/Kconfig b/arch/riscv/Kconfig
> index e0d7d61779a6..bd659327bc6b 100644
> --- a/arch/riscv/Kconfig
> +++ b/arch/riscv/Kconfig
> @@ -54,12 +54,32 @@ config ZONE_DMA32
> bool
> default y if 64BIT
>
> +config VA_BITS
> + int
> + default 32 if 32BIT
> + default 39 if 64BIT
> +
> +config PA_BITS
> + int
> + default 34 if 32BIT
> + default 56 if 64BIT
> +
> config PAGE_OFFSET
> hex
> default 0xC0000000 if 32BIT && MAXPHYSMEM_2GB
> default 0xffffffff80000000 if 64BIT && MAXPHYSMEM_2GB
> default 0xffffffe000000000 if 64BIT && MAXPHYSMEM_128GB
>
> +config ARCH_FLATMEM_ENABLE
> + def_bool y
> +
> +config ARCH_SPARSEMEM_ENABLE
> + def_bool y
> + select SPARSEMEM_VMEMMAP_ENABLE
> +
> +config ARCH_SELECT_MEMORY_MODEL
> + def_bool ARCH_SPARSEMEM_ENABLE
> +
> config STACKTRACE_SUPPORT
> def_bool y
>
> @@ -94,6 +114,9 @@ config PGTABLE_LEVELS
> config HAVE_KPROBES
> def_bool n
>
> +config HAVE_ARCH_PFN_VALID
> + def_bool y
> +
> menu "Platform type"
>
> choice
> diff --git a/arch/riscv/include/asm/pgtable.h b/arch/riscv/include/asm/pgtable.h
> index 16301966d65b..e1162336f5ea 100644
> --- a/arch/riscv/include/asm/pgtable.h
> +++ b/arch/riscv/include/asm/pgtable.h
> @@ -89,6 +89,23 @@ extern pgd_t swapper_pg_dir[];
> #define __S110 PAGE_SHARED_EXEC
> #define __S111 PAGE_SHARED_EXEC
>
> +#define VMALLOC_SIZE (KERN_VIRT_SIZE >> 1)
> +#define VMALLOC_END (PAGE_OFFSET - 1)
> +#define VMALLOC_START (PAGE_OFFSET - VMALLOC_SIZE)
> +
> +/*
> + * Roughly size the vmemmap space to be large enough to fit enough
> + * struct pages to map half the virtual address space. Then
> + * position vmemmap directly below the VMALLOC region.
> + */
> +#define VMEMMAP_SHIFT \
> + (CONFIG_VA_BITS - PAGE_SHIFT - 1 + STRUCT_PAGE_MAX_SHIFT)
> +#define VMEMMAP_SIZE (1UL << VMEMMAP_SHIFT)
> +#define VMEMMAP_END (VMALLOC_START - 1)
> +#define VMEMMAP_START (VMALLOC_START - VMEMMAP_SIZE)
> +
> +#define vmemmap ((struct page *)VMEMMAP_START)
> +
> /*
> * ZERO_PAGE is a global shared page that is always zero,
> * used for zero-mapped memory areas, etc.
> @@ -411,10 +428,6 @@ static inline void pgtable_cache_init(void)
> /* No page table caches to initialize */
> }
>
> -#define VMALLOC_SIZE (KERN_VIRT_SIZE >> 1)
> -#define VMALLOC_END (PAGE_OFFSET - 1)
> -#define VMALLOC_START (PAGE_OFFSET - VMALLOC_SIZE)
> -
> /*
> * Task size is 0x40000000000 for RV64 or 0xb800000 for RV32.
> * Note that PGDIR_SIZE must evenly divide TASK_SIZE.
> diff --git a/arch/riscv/include/asm/sparsemem.h b/arch/riscv/include/asm/sparsemem.h
> new file mode 100644
> index 000000000000..b58ba2d9ed6e
> --- /dev/null
> +++ b/arch/riscv/include/asm/sparsemem.h
> @@ -0,0 +1,11 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> +
> +#ifndef __ASM_SPARSEMEM_H
> +#define __ASM_SPARSEMEM_H
> +
> +#ifdef CONFIG_SPARSEMEM
> +#define MAX_PHYSMEM_BITS CONFIG_PA_BITS
> +#define SECTION_SIZE_BITS 27
> +#endif /* CONFIG_SPARSEMEM */
> +
> +#endif /* __ASM_SPARSEMEM_H */
> diff --git a/arch/riscv/kernel/setup.c b/arch/riscv/kernel/setup.c
> index fc8006a042eb..98f39adefb1a 100644
> --- a/arch/riscv/kernel/setup.c
> +++ b/arch/riscv/kernel/setup.c
> @@ -193,6 +193,9 @@ static void __init setup_bootmem(void)
> PFN_PHYS(end_pfn - start_pfn),
> &memblock.memory, 0);
> }
> +
> + memblocks_present();
> + sparse_init();
> }

I just applied this patch to Linux kernel 5.2.
I used a dts with 2 memory nodes with hole int it.

memory@80000000 {
device_type = "memory";
reg = <0x0 0x80000000 0x0 0x40000000>;
};
memory@180000000 {
device_type = "memory";
reg = <0x1 0x80000000 0x0 0x40000000>;
};

I found it will boot failure. Did I miss anything?

[ 0.000000] Sorting __ex_table...
[ 0.000000] BUG: Bad page state in process swapper pfn:180001
[ 0.000000] page:ffffffcf05400038 refcount:0 mapcount:94371937
mapping:00000000ffffffff index:0x4000000000000000
[ 0.000000] anon
[ 0.000000] flags: 0x0()
[ 0.000000] raw: 0000000000000000 0000000000000000 0000000000000000
00000000ffffffff
[ 0.000000] raw: 4000000000000000 ffffffcf05a00060 0000000005a00060
[ 0.000000] page dumped because: non-NULL mapping
[ 0.000000] Modules linked in:
[ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 5.2.0-00001-g737d8214d9a9 #3
[ 0.000000] Call Trace:
[ 0.000000] [<ffffffe00017759c>] walk_stackframe+0x0/0xa0
[ 0.000000] [<ffffffe00017769c>] show_stack+0x2a/0x34
[ 0.000000] [<ffffffe00070c53e>] dump_stack+0x62/0x7c
[ 0.000000] [<ffffffe0002330ae>] bad_page+0xca/0x120
[ 0.000000] [<ffffffe00023313c>] free_pages_check_bad+0x38/0x7a
[ 0.000000] [<ffffffe00023368a>] __free_pages_ok+0x496/0x4ba
[ 0.000000] [<ffffffe000234a82>] __free_pages.part.4+0xe/0x22
[ 0.000000] [<ffffffe000234c9e>] __free_pages_core+0x9a/0xa6
[ 0.000000] [<ffffffe000009b0a>] memblock_free_pages+0x12/0x1a
[ 0.000000] [<ffffffe00000b496>] memblock_free_all+0x144/0x1a8
[ 0.000000] [<ffffffe00000274a>] mem_init+0x28/0x36
[ 0.000000] [<ffffffe0000008a0>] start_kernel+0x1bc/0x360
[ 0.000000] [<ffffffe000000074>] clear_bss_done+0x34/0x38
[ 0.000000] Disabling lock debugging due to kernel taint
[ 0.000000] BUG: Bad page state in process swapper pfn:180002
[ 0.000000] page:ffffffcf05400070 refcount:0 mapcount:94371993
mapping:00000000ffffffff index:0x4000000000000000
[ 0.000000] anon
[ 0.000000] flags: 0x0()
[ 0.000000] raw: 0000000000000000 0000000000000000 0000000000000000
00000000ffffffff
[ 0.000000] raw: 4000000000000000 ffffffcf05a00098 0000000005a00098
[ 0.000000] page dumped because: non-NULL mapping
[ 0.000000] Modules linked in:
[ 0.000000] CPU: 0 PID: 0 Comm: swapper Tainted: G B
5.2.0-00001-g737d8214d9a9 #3
[ 0.000000] Call Trace:
[ 0.000000] [<ffffffe00017759c>] walk_stackframe+0x0/0xa0
[ 0.000000] [<ffffffe00017769c>] show_stack+0x2a/0x34
[ 0.000000] [<ffffffe00070c53e>] dump_stack+0x62/0x7c
[ 0.000000] [<ffffffe0002330ae>] bad_page+0xca/0x120
[ 0.000000] [<ffffffe00023313c>] free_pages_check_bad+0x38/0x7a
[ 0.000000] [<ffffffe00023368a>] __free_pages_ok+0x496/0x4ba
[ 0.000000] [<ffffffe000234a82>] __free_pages.part.4+0xe/0x22
[ 0.000000] [<ffffffe000234c9e>] __free_pages_core+0x9a/0xa6
[ 0.000000] [<ffffffe000009b0a>] memblock_free_pages+0x12/0x1a
[ 0.000000] [<ffffffe00000b496>] memblock_free_all+0x144/0x1a8
[ 0.000000] [<ffffffe00000274a>] mem_init+0x28/0x36
[ 0.000000] [<ffffffe0000008a0>] start_kernel+0x1bc/0x360
[ 0.000000] [<ffffffe000000074>] clear_bss_done+0x34/0x38
[ 0.000000] BUG: Bad page state in process swapper pfn:180003
[ 0.000000] page:ffffffcf054000a8 refcount:0 mapcount:94372049
mapping:00000000ffffffff index:0x4000000000000000
[ 0.000000] anon
[ 0.000000] flags: 0x0()
[ 0.000000] raw: 0000000000000000 0000000000000000 0000000000000000
00000000ffffffff
[ 0.000000] raw: 4000000000000000 ffffffcf05a000d0 0000000005a000d0
[ 0.000000] page dumped because: non-NULL mapping

I look this issue more closely.
I found it always sets each memblock region to node 0. Does this make sense?
I am not sure if I understand this correctly. Do you have any idea for
this? Thank you. :)

for_each_memblock(memory, reg) {
unsigned long start_pfn = memblock_region_memory_base_pfn(reg);
unsigned long end_pfn = memblock_region_memory_end_pfn(reg);
memblock_set_node(PFN_PHYS(start_pfn), PFN_PHYS(end_pfn -
start_pfn), &memblock.memory, 0);


^^^
}

[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000080200000-0x00000000bfffffff]
[ 0.000000] node 0: [mem 0x0000000180000000-0x00000001bfffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000080200000-0x00000001bfffffff]

\
 
 \ /
  Last update: 2019-07-31 08:31    [W:0.095 / U:29.576 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site