lkml.org 
[lkml]   [2019]   [Jul]   [31]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 2/2] drm: bridge: adv7511: Add support for ADV7535
From
Date
Hi Bogdan,

On 30/07/2019 15:17, Bogdan Togorean wrote:
> ADV7535 is a DSI to HDMI bridge chip like ADV7533 but it allows
> 1080p@60Hz. v1p2 is fixed to 1.8V on ADV7535 but on ADV7533 can be 1.2V
> or 1.8V and is configurable in a register.
>
> Signed-off-by: Bogdan Togorean <bogdan.togorean@analog.com>
> ---
> drivers/gpu/drm/bridge/adv7511/adv7511.h | 2 ++
> drivers/gpu/drm/bridge/adv7511/adv7511_drv.c | 31 +++++++++++++++-----
> 2 files changed, 25 insertions(+), 8 deletions(-)
>
> diff --git a/drivers/gpu/drm/bridge/adv7511/adv7511.h b/drivers/gpu/drm/bridge/adv7511/adv7511.h
> index 52b2adfdc877..702432615ec8 100644
> --- a/drivers/gpu/drm/bridge/adv7511/adv7511.h
> +++ b/drivers/gpu/drm/bridge/adv7511/adv7511.h
> @@ -91,6 +91,7 @@
> #define ADV7511_REG_ARC_CTRL 0xdf
> #define ADV7511_REG_CEC_I2C_ADDR 0xe1
> #define ADV7511_REG_CEC_CTRL 0xe2
> +#define ADV7511_REG_SUPPLY_SELECT 0xe4
> #define ADV7511_REG_CHIP_ID_HIGH 0xf5
> #define ADV7511_REG_CHIP_ID_LOW 0xf6
>
> @@ -320,6 +321,7 @@ struct adv7511_video_config {
> enum adv7511_type {
> ADV7511,
> ADV7533,
> + ADV7535,
> };
>
> #define ADV7511_MAX_ADDRS 3
> diff --git a/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c b/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c
> index f6d2681f6927..941072decb73 100644
> --- a/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c
> +++ b/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c
> @@ -367,7 +367,7 @@ static void adv7511_power_on(struct adv7511 *adv7511)
> */
> regcache_sync(adv7511->regmap);
>
> - if (adv7511->type == ADV7533)
> + if (adv7511->type == ADV7533 || adv7511->type == ADV7535)
> adv7533_dsi_power_on(adv7511);
> adv7511->powered = true;
> }
> @@ -387,7 +387,7 @@ static void __adv7511_power_off(struct adv7511 *adv7511)
> static void adv7511_power_off(struct adv7511 *adv7511)
> {
> __adv7511_power_off(adv7511);
> - if (adv7511->type == ADV7533)
> + if (adv7511->type == ADV7533 || adv7511->type == ADV7535)
> adv7533_dsi_power_off(adv7511);
> adv7511->powered = false;
> }
> @@ -761,7 +761,7 @@ static void adv7511_mode_set(struct adv7511 *adv7511,
> regmap_update_bits(adv7511->regmap, 0x17,
> 0x60, (vsync_polarity << 6) | (hsync_polarity << 5));
>
> - if (adv7511->type == ADV7533)
> + if (adv7511->type == ADV7533 || adv7511->type == ADV7535)
> adv7533_mode_set(adv7511, adj_mode);
>
> drm_mode_copy(&adv7511->curr_mode, adj_mode);
> @@ -874,7 +874,7 @@ static int adv7511_bridge_attach(struct drm_bridge *bridge)
> &adv7511_connector_helper_funcs);
> drm_connector_attach_encoder(&adv->connector, bridge->encoder);
>
> - if (adv->type == ADV7533)
> + if (adv->type == ADV7533 || adv->type == ADV7535)
> ret = adv7533_attach_dsi(adv);
>
> if (adv->i2c_main->irq)
> @@ -952,7 +952,7 @@ static bool adv7511_cec_register_volatile(struct device *dev, unsigned int reg)
> struct i2c_client *i2c = to_i2c_client(dev);
> struct adv7511 *adv7511 = i2c_get_clientdata(i2c);
>
> - if (adv7511->type == ADV7533)
> + if (adv7511->type == ADV7533 || adv7511->type == ADV7535)
> reg -= ADV7533_REG_CEC_OFFSET;
>
> switch (reg) {
> @@ -994,7 +994,7 @@ static int adv7511_init_cec_regmap(struct adv7511 *adv)
> goto err;
> }
>
> - if (adv->type == ADV7533) {
> + if (adv->type == ADV7533 || adv->type == ADV7535) {
> ret = adv7533_patch_cec_registers(adv);
> if (ret)
> goto err;
> @@ -1094,8 +1094,9 @@ static int adv7511_probe(struct i2c_client *i2c, const struct i2c_device_id *id)
> struct adv7511_link_config link_config;
> struct adv7511 *adv7511;
> struct device *dev = &i2c->dev;
> + struct regulator *reg_v1p2;
> unsigned int val;
> - int ret;
> + int ret, reg_v1p2_uV;
>
> if (!dev->of_node)
> return -EINVAL;
> @@ -1163,6 +1164,18 @@ static int adv7511_probe(struct i2c_client *i2c, const struct i2c_device_id *id)
> if (ret)
> goto uninit_regulators;
>
> + if (adv7511->type == ADV7533) {
> + ret = match_string(adv7533_supply_names, adv7511->num_supplies,
> + "v1p2");
> + reg_v1p2 = adv7511->supplies[ret].consumer;
> + reg_v1p2_uV = regulator_get_voltage(reg_v1p2);
> +
> + if (reg_v1p2_uV == 1200000) {
> + regmap_update_bits(adv7511->regmap,
> + ADV7511_REG_SUPPLY_SELECT, 0x80, 0x80);
> + }
> + }
> +
> adv7511_packet_disable(adv7511, 0xffff);
>
> adv7511->i2c_edid = i2c_new_secondary_device(i2c, "edid",
> @@ -1242,7 +1255,7 @@ static int adv7511_remove(struct i2c_client *i2c)
> {
> struct adv7511 *adv7511 = i2c_get_clientdata(i2c);
>
> - if (adv7511->type == ADV7533)
> + if (adv7511->type == ADV7533 || adv7511->type == ADV7535)
> adv7533_detach_dsi(adv7511);
> i2c_unregister_device(adv7511->i2c_cec);
> if (adv7511->cec_clk)
> @@ -1268,6 +1281,7 @@ static const struct i2c_device_id adv7511_i2c_ids[] = {
> { "adv7513", ADV7511 },
> #ifdef CONFIG_DRM_I2C_ADV7533
> { "adv7533", ADV7533 },
> + { "adv7535", ADV7535 },

Maybe you should add a new CONFIG_DRM_I2C_ADV7535 or update the current CONFIG_DRM_I2C_ADV7533 description.

> #endif
> { }
> };
> @@ -1279,6 +1293,7 @@ static const struct of_device_id adv7511_of_ids[] = {
> { .compatible = "adi,adv7513", .data = (void *)ADV7511 },
> #ifdef CONFIG_DRM_I2C_ADV7533
> { .compatible = "adi,adv7533", .data = (void *)ADV7533 },
> + { .compatible = "adi,adv7535", .data = (void *)ADV7535 },

Ditto

I'm not a adv75xx expert but it looks sane.

Neil

> #endif
> { }
> };
>

\
 
 \ /
  Last update: 2019-07-31 09:42    [W:0.255 / U:0.312 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site