lkml.org 
[lkml]   [2019]   [Jul]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [Regression] Commit "nvme/pci: Use host managed power state for suspend" has problems
On Tue, Jul 30, 2019 at 03:45:31AM -0700, Rafael J. Wysocki wrote:
> So I can reproduce this problem with plain 5.3-rc1 and the patch below fixes it.
>
> Also Mario reports that the same patch needs to be applied for his 9380 to reach
> SLP_S0 after some additional changes under testing/review now, so here it goes.
>
> [The changes mentioned above are in the pm-s2idle-testing branch in the
> linux-pm.git tree at kernel.org.]
>
> ---
> From: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
> Subject: [PATCH] nvme-pci: Do not prevent PCI bus-level PM from being used
>
> One of the modifications made by commit d916b1be94b6 ("nvme-pci: use
> host managed power state for suspend") was adding a pci_save_state()
> call to nvme_suspend() in order to prevent the PCI bus-level PM from
> being applied to the suspended NVMe devices, but that causes the NVMe
> drive (PC401 NVMe SK hynix 256GB) in my Dell XPS13 9380 to prevent
> the SoC from reaching package idle states deeper than PC3, which is
> way insufficient for system suspend.
>
> Fix this issue by removing the pci_save_state() call in question.

I'm okay with the patch if we can get confirmation this doesn't break
any previously tested devices. I recall we add the pci_save_state() in
the first place specifically to prevent PCI D3 since that was reported
to break some devices' low power settings. Kai-Heng or Mario, any input
here?



> Fixes: d916b1be94b6 ("nvme-pci: use host managed power state for suspend")
> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
> ---
> drivers/nvme/host/pci.c | 8 +-------
> 1 file changed, 1 insertion(+), 7 deletions(-)
>
> Index: linux-pm/drivers/nvme/host/pci.c
> ===================================================================
> --- linux-pm.orig/drivers/nvme/host/pci.c
> +++ linux-pm/drivers/nvme/host/pci.c
> @@ -2897,14 +2897,8 @@ static int nvme_suspend(struct device *d
> nvme_dev_disable(ndev, true);
> ctrl->npss = 0;
> ret = 0;
> - goto unfreeze;
> }
> - /*
> - * A saved state prevents pci pm from generically controlling the
> - * device's power. If we're using protocol specific settings, we don't
> - * want pci interfering.
> - */
> - pci_save_state(pdev);
> +
> unfreeze:
> nvme_unfreeze(ctrl);
> return ret;

\
 
 \ /
  Last update: 2019-07-30 16:45    [W:1.511 / U:0.080 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site