lkml.org 
[lkml]   [2019]   [Jul]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH net-next 1/2] net: phy: broadcom: set features explicitly for BCM54616S
Date
On 7/29/19 8:35 PM, Andrew Lunn wrote:
> On Mon, Jul 29, 2019 at 05:25:32PM -0700, Tao Ren wrote:
>> BCM54616S feature "PHY_GBIT_FEATURES" was removed by commit dcdecdcfe1fc
>> ("net: phy: switch drivers to use dynamic feature detection"). As dynamic
>> feature detection doesn't work when BCM54616S is working in RGMII-Fiber
>> mode (different sets of MII Control/Status registers being used), let's
>> set "PHY_GBIT_FEATURES" for BCM54616S explicitly.
>
> Hi Tao
>
> What exactly does it get wrong?
>
> Thanks
> Andrew

Hi Andrew,

BCM54616S is set to RGMII-Fiber (1000Base-X) mode on my platform, and none of the features (1000BaseT/100BaseT/10BaseT) can be detected by genphy_read_abilities(), because the PHY only reports 1000BaseX_Full|Half ability in this mode.


Thanks,

Tao
\
 
 \ /
  Last update: 2019-07-30 07:08    [W:0.405 / U:0.272 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site