lkml.org 
[lkml]   [2019]   [Jul]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v7 17/20] soc/tegra: pmc: Configure core power request polarity
Date
This patch configures polarity of the core power request signal
in PMC control register based on the device tree property.

PMC asserts and de-asserts power request signal based on it polarity
when it need to power-up and power-down the core rail during SC7.

Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>
---
drivers/soc/tegra/pmc.c | 6 ++++++
1 file changed, 6 insertions(+)

diff --git a/drivers/soc/tegra/pmc.c b/drivers/soc/tegra/pmc.c
index 3aa71c28a10a..e013ada7e4e9 100644
--- a/drivers/soc/tegra/pmc.c
+++ b/drivers/soc/tegra/pmc.c
@@ -56,6 +56,7 @@
#define PMC_CNTRL_SIDE_EFFECT_LP0 BIT(14) /* LP0 when CPU pwr gated */
#define PMC_CNTRL_SYSCLK_OE BIT(11) /* system clock enable */
#define PMC_CNTRL_SYSCLK_POLARITY BIT(10) /* sys clk polarity */
+#define PMC_CNTRL_PWRREQ_POLARITY BIT(8)
#define PMC_CNTRL_MAIN_RST BIT(4)

#define PMC_WAKE_MASK 0x0c
@@ -2290,6 +2291,11 @@ static void tegra20_pmc_init(struct tegra_pmc *pmc)
else
value |= PMC_CNTRL_SYSCLK_POLARITY;

+ if (pmc->corereq_high)
+ value &= ~PMC_CNTRL_PWRREQ_POLARITY;
+ else
+ value |= PMC_CNTRL_PWRREQ_POLARITY;
+
/* configure the output polarity while the request is tristated */
tegra_pmc_writel(pmc, value, PMC_CNTRL);

--
2.7.4
\
 
 \ /
  Last update: 2019-07-31 02:21    [W:0.262 / U:0.180 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site