lkml.org 
[lkml]   [2019]   [Jul]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v1 OPT1] driver core: Fix use-after-free and double free on glue directory
On Wed, Jun 26, 2019 at 10:38:23PM +0800, Muchun Song wrote:
> There is a race condition between removing glue directory and adding a new
> device under the glue directory. It can be reproduced in following test:
>
> path 1: Add the child device under glue dir
> device_add()
> get_device_parent()
> mutex_lock(&gdp_mutex);
> ....
> /*find parent from glue_dirs.list*/
> list_for_each_entry(k, &dev->class->p->glue_dirs.list, entry)
> if (k->parent == parent_kobj) {
> kobj = kobject_get(k);
> break;
> }
> ....
> mutex_unlock(&gdp_mutex);
> ....
> ....
> kobject_add()
> kobject_add_internal()
> create_dir()
> sysfs_create_dir_ns()
> if (kobj->parent)
> parent = kobj->parent->sd;
> ....
> kernfs_create_dir_ns(parent)
> kernfs_new_node()
> kernfs_get(parent)
> ....
> /* link in */
> rc = kernfs_add_one(kn);
> if (!rc)
> return kn;
>
> kernfs_put(kn)
> ....
> repeat:
> kmem_cache_free(kn)
> kn = parent;
>
> if (kn) {
> if (atomic_dec_and_test(&kn->count))
> goto repeat;
> }
> ....
>
> path2: Remove last child device under glue dir
> device_del()
> cleanup_device_parent()
> cleanup_glue_dir()
> mutex_lock(&gdp_mutex);
> if (!kobject_has_children(glue_dir))
> kobject_del(glue_dir);
> kobject_put(glue_dir);
> mutex_unlock(&gdp_mutex);
>
> Before path2 remove last child device under glue dir, If path1 add a new
> device under glue dir, the glue_dir kobject reference count will be
> increase to 2 via kobject_get(k) in get_device_parent(). And path1 has
> been called kernfs_new_node(), but not call kernfs_get(parent).
> Meanwhile, path2 call kobject_del(glue_dir) beacause 0 is returned by
> kobject_has_children(). This result in glue_dir->sd is freed and it's
> reference count will be 0. Then path1 call kernfs_get(parent) will trigger
> a warning in kernfs_get()(WARN_ON(!atomic_read(&kn->count))) and increase
> it's reference count to 1. Because glue_dir->sd is freed by path2, the next
> call kernfs_add_one() by path1 will fail(This is also use-after-free)
> and call atomic_dec_and_test() to decrease reference count. Because the
> reference count is decremented to 0, it will also call kmem_cache_free()
> to free glue_dir->sd again. This will result in double free.
>
> In order to avoid this happening, we should not call kobject_del() on
> path2 when the reference count of glue_dir is greater than 1. So we add a
> conditional statement to fix it.
>
> The following calltrace is captured in kernel 4.14 with the following patch
> applied:
>
> commit 726e41097920 ("drivers: core: Remove glue dirs from sysfs earlier")
>
> --------------------------------------------------------------------------
> [ 3.633703] WARNING: CPU: 4 PID: 513 at .../fs/kernfs/dir.c:494
> Here is WARN_ON(!atomic_read(&kn->count) in kernfs_get().
> ....
> [ 3.633986] Call trace:
> [ 3.633991] kernfs_create_dir_ns+0xa8/0xb0
> [ 3.633994] sysfs_create_dir_ns+0x54/0xe8
> [ 3.634001] kobject_add_internal+0x22c/0x3f0
> [ 3.634005] kobject_add+0xe4/0x118
> [ 3.634011] device_add+0x200/0x870
> [ 3.634017] _request_firmware+0x958/0xc38
> [ 3.634020] request_firmware_into_buf+0x4c/0x70
> ....
> [ 3.634064] kernel BUG at .../mm/slub.c:294!
> Here is BUG_ON(object == fp) in set_freepointer().
> ....
> [ 3.634346] Call trace:
> [ 3.634351] kmem_cache_free+0x504/0x6b8
> [ 3.634355] kernfs_put+0x14c/0x1d8
> [ 3.634359] kernfs_create_dir_ns+0x88/0xb0
> [ 3.634362] sysfs_create_dir_ns+0x54/0xe8
> [ 3.634366] kobject_add_internal+0x22c/0x3f0
> [ 3.634370] kobject_add+0xe4/0x118
> [ 3.634374] device_add+0x200/0x870
> [ 3.634378] _request_firmware+0x958/0xc38
> [ 3.634381] request_firmware_into_buf+0x4c/0x70
> --------------------------------------------------------------------------
>
> Fixes: 726e41097920 ("drivers: core: Remove glue dirs from sysfs earlier")
>
> Signed-off-by: Muchun Song <smuchun@gmail.com>
> ---
>
> Hi Greg,
>
> This fix patch is based on the refcount. It is also the original fix method.
> Another fix patch is based on the mutex lock.
>
> It can reference to:
> Subject: [PATCH v4 OPT2] driver core: Fix use-after-free and double free on glue directory
>
> I am hoping you would chose which solution you prefered here. Thanks.
>
> drivers/base/core.c | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/drivers/base/core.c b/drivers/base/core.c
> index 4aeaa0c92bda..5ac5376ae9af 100644
> --- a/drivers/base/core.c
> +++ b/drivers/base/core.c
> @@ -1825,7 +1825,7 @@ static void cleanup_glue_dir(struct device *dev, struct kobject *glue_dir)
> return;
>
> mutex_lock(&gdp_mutex);
> - if (!kobject_has_children(glue_dir))
> + if (!kobject_has_children(glue_dir) && kref_read(&glue_dir->kref) == 1)
> kobject_del(glue_dir);

Ok, I guess I have to take this patch, as the other one is so bad :)

But, I need a very large comment here saying why we are poking around in
a kref and why we need to do this, at the expense of anything else.

So can you respin this patch with a comment here to help explain it so
we have a chance to understand it when we run across this line in 10
years?

thanks,

greg k-h

\
 
 \ /
  Last update: 2019-07-03 21:38    [W:0.065 / U:0.004 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site