lkml.org 
[lkml]   [2019]   [Jul]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[RFC PATCH 00/16] KVM RISC-V Support
Date
This series adds initial KVM RISC-V support. Currently, we are able to boot
RISC-V 64bit Linux Guests with multiple VCPUs.

Few key aspects of KVM RISC-V added by this series are:
1. Minimal possible KVM world-switch which touches only GPRs and few CSRs.
2. Full Guest/VM switch is done via vcpu_get/vcpu_put infrastructure.
3. KVM ONE_REG interface for VCPU register access from user-space.
4. PLIC emulation is done in user-space. In-kernel PLIC emulation, will
be added in future.
5. Timer and IPI emuation is done in-kernel.
6. MMU notifiers supported.
7. FP lazy save/restore supported.
8. SBI v0.1 emulation for KVM Guest available.

More feature additions and enhancments will follow after this series and
eventually KVM RISC-V will be at-par with other architectures.

This series is based upon KVM pre-patches sent by Atish earlier
(https://lkml.org/lkml/2019/7/26/1271) and it can be found in
riscv_kvm_v1 branch at:
https//github.com/avpatel/linux.git

Our work-in-progress KVMTOOL RISC-V port can be found in riscv_v1 branch at:
https//github.com/avpatel/kvmtool.git

We need OpenSBI with RISC-V hypervisor extension support which can be
found in hyp_ext_changes_v1 branch at:
https://github.com/riscv/opensbi.git

The QEMU RISC-V hypervisor emulation is done by Alistair and is available
in riscv-hyp-work.next branch at:
https://github.com/alistair23/qemu.git

To play around with KVM RISC-V, here are few reference commands:
1) To cross-compile KVMTOOL:
$ make lkvm-static
2) To launch RISC-V Host Linux:
$ qemu-system-riscv64 -monitor null -cpu rv64,h=true -M virt \
-m 512M -display none -serial mon:stdio \
-kernel opensbi/build/platform/qemu/virt/firmware/fw_jump.elf \
-device loader,file=build-riscv64/arch/riscv/boot/Image,addr=0x80200000 \
-initrd ./rootfs_kvm_riscv64.img \
-append "root=/dev/ram rw console=ttyS0 earlycon=sbi"
3) To launch RISC-V Guest Linux with 9P rootfs:
$ ./apps/lkvm-static run -m 128 -c2 --console serial \
-p "console=ttyS0 earlycon=uart8250,mmio,0x3f8" -k ./apps/Image --debug
4) To launch RISC-V Guest Linux with initrd:
$ ./apps/lkvm-static run -m 128 -c2 --console serial \
-p "console=ttyS0 earlycon=uart8250,mmio,0x3f8" -k ./apps/Image \
-i ./apps/rootfs.img --debug

Anup Patel (13):
KVM: RISC-V: Add KVM_REG_RISCV for ONE_REG interface
RISC-V: Add hypervisor extension related CSR defines
RISC-V: Add initial skeletal KVM support
RISC-V: KVM: Implement VCPU create, init and destroy functions
RISC-V: KVM: Implement VCPU interrupts and requests handling
RISC-V: KVM: Implement KVM_GET_ONE_REG/KVM_SET_ONE_REG ioctls
RISC-V: KVM: Implement VCPU world-switch
RISC-V: KVM: Handle MMIO exits for VCPU
RISC-V: KVM: Handle WFI exits for VCPU
RISC-V: KVM: Implement VMID allocator
RISC-V: KVM: Implement stage2 page table programming
RISC-V: KVM: Implement MMU notifiers
RISC-V: Enable VIRTIO drivers in RV64 and RV32 defconfig

Atish Patra (3):
RISC-V: KVM: Add timer functionality
RISC-V: KVM: FP lazy save/restore
RISC-V: KVM: Add SBI v0.1 support

arch/riscv/Kconfig | 2 +
arch/riscv/Makefile | 2 +
arch/riscv/configs/defconfig | 23 +-
arch/riscv/configs/rv32_defconfig | 13 +
arch/riscv/include/asm/csr.h | 58 ++
arch/riscv/include/asm/kvm_host.h | 232 ++++++
arch/riscv/include/asm/kvm_vcpu_timer.h | 32 +
arch/riscv/include/asm/pgtable-bits.h | 1 +
arch/riscv/include/uapi/asm/kvm.h | 74 ++
arch/riscv/kernel/asm-offsets.c | 148 ++++
arch/riscv/kvm/Kconfig | 34 +
arch/riscv/kvm/Makefile | 14 +
arch/riscv/kvm/main.c | 64 ++
arch/riscv/kvm/mmu.c | 904 ++++++++++++++++++++++++
arch/riscv/kvm/tlb.S | 42 ++
arch/riscv/kvm/vcpu.c | 817 +++++++++++++++++++++
arch/riscv/kvm/vcpu_exit.c | 553 +++++++++++++++
arch/riscv/kvm/vcpu_sbi.c | 118 ++++
arch/riscv/kvm/vcpu_switch.S | 367 ++++++++++
arch/riscv/kvm/vcpu_timer.c | 106 +++
arch/riscv/kvm/vm.c | 107 +++
arch/riscv/kvm/vmid.c | 130 ++++
drivers/clocksource/timer-riscv.c | 6 +
include/clocksource/timer-riscv.h | 14 +
include/uapi/linux/kvm.h | 1 +
25 files changed, 3857 insertions(+), 5 deletions(-)
create mode 100644 arch/riscv/include/asm/kvm_host.h
create mode 100644 arch/riscv/include/asm/kvm_vcpu_timer.h
create mode 100644 arch/riscv/include/uapi/asm/kvm.h
create mode 100644 arch/riscv/kvm/Kconfig
create mode 100644 arch/riscv/kvm/Makefile
create mode 100644 arch/riscv/kvm/main.c
create mode 100644 arch/riscv/kvm/mmu.c
create mode 100644 arch/riscv/kvm/tlb.S
create mode 100644 arch/riscv/kvm/vcpu.c
create mode 100644 arch/riscv/kvm/vcpu_exit.c
create mode 100644 arch/riscv/kvm/vcpu_sbi.c
create mode 100644 arch/riscv/kvm/vcpu_switch.S
create mode 100644 arch/riscv/kvm/vcpu_timer.c
create mode 100644 arch/riscv/kvm/vm.c
create mode 100644 arch/riscv/kvm/vmid.c
create mode 100644 include/clocksource/timer-riscv.h

--
2.17.1

\
 
 \ /
  Last update: 2019-07-29 13:56    [W:0.478 / U:0.948 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site