lkml.org 
[lkml]   [2019]   [Jul]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH net-next v3 3/4] dt-bindings: net: fsl: enetc: Add bindings for the central MDIO PCIe endpoint
Date
The on-chip PCIe root complex that integrates the ENETC ethernet
controllers also integrates a PCIe endpoint for the MDIO controller
providing for centralized control of the ENETC mdio bus.
Add bindings for this "central" MDIO Integrated PCIe Endpoint.

Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com>
---
v1 - none
v2 - none
v3 - fixed spelling (commit message mostly)

.../devicetree/bindings/net/fsl-enetc.txt | 42 +++++++++++++++++--
1 file changed, 39 insertions(+), 3 deletions(-)

diff --git a/Documentation/devicetree/bindings/net/fsl-enetc.txt b/Documentation/devicetree/bindings/net/fsl-enetc.txt
index 25fc687419db..b7034ccbc1bd 100644
--- a/Documentation/devicetree/bindings/net/fsl-enetc.txt
+++ b/Documentation/devicetree/bindings/net/fsl-enetc.txt
@@ -11,7 +11,9 @@ Required properties:
to parent node bindings.
- compatible : Should be "fsl,enetc".

-1) The ENETC external port is connected to a MDIO configurable phy:
+1. The ENETC external port is connected to a MDIO configurable phy
+
+1.1. Using the local ENETC Port MDIO interface

In this case, the ENETC node should include a "mdio" sub-node
that in turn should contain the "ethernet-phy" node describing the
@@ -47,8 +49,42 @@ Example:
};
};

-2) The ENETC port is an internal port or has a fixed-link external
-connection:
+1.2. Using the central MDIO PCIe endpoint device
+
+In this case, the mdio node should be defined as another PCIe
+endpoint node, at the same level with the ENETC port nodes.
+
+Required properties:
+
+- reg : Specifies PCIe Device Number and Function
+ Number of the ENETC endpoint device, according
+ to parent node bindings.
+- compatible : Should be "fsl,enetc-mdio".
+
+The remaining required mdio bus properties are standard, their bindings
+already defined in Documentation/devicetree/bindings/net/mdio.txt.
+
+Example:
+
+ ethernet@0,0 {
+ compatible = "fsl,enetc";
+ reg = <0x000000 0 0 0 0>;
+ phy-handle = <&sgmii_phy0>;
+ phy-connection-type = "sgmii";
+ };
+
+ mdio@0,3 {
+ compatible = "fsl,enetc-mdio";
+ reg = <0x000300 0 0 0 0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ sgmii_phy0: ethernet-phy@2 {
+ reg = <0x2>;
+ };
+ };
+
+2. The ENETC port is an internal port or has a fixed-link external
+connection

In this case, the ENETC port node defines a fixed link connection,
as specified by Documentation/devicetree/bindings/net/fixed-link.txt.
--
2.17.1
\
 
 \ /
  Last update: 2019-07-29 12:05    [W:0.107 / U:0.144 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site