lkml.org 
[lkml]   [2019]   [Jul]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 1/1] power: supply: sbs-battery: Add ability to force load a battery via the devicetree
From
Date
Hi Nick and Guenter
Just adding you to this one also seeing as you're looking at that other
sbs_battery patch for me.
Not sure why the get maintainers didn't list you for this one.

Cheers
   Richard Tresidder
> Add the ability to force load a hot pluggable battery during boot where
> there is no gpio detect method available and the module is statically
> built. Normal polling will then occur on that battery when it is inserted.
>
> Signed-off-by: Richard Tresidder <rtresidd@electromag.com.au>
> ---
>
> Notes:
> Add the ability to force load a hot pluggable battery during boot where
> there is no gpio detect method available and the module is statically
> built. Normal polling will then occur on that battery when it is inserted.
>
> drivers/power/supply/sbs-battery.c | 6 +++++-
> 1 file changed, 5 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/power/supply/sbs-battery.c b/drivers/power/supply/sbs-battery.c
> index 048d205..ea8ba3e 100644
> --- a/drivers/power/supply/sbs-battery.c
> +++ b/drivers/power/supply/sbs-battery.c
> @@ -161,6 +161,7 @@ struct sbs_info {
> int poll_time;
> u32 i2c_retry_count;
> u32 poll_retry_count;
> + bool force_load;
> struct delayed_work work;
> struct mutex mode_lock;
> u32 flags;
> @@ -852,6 +853,9 @@ static int sbs_probe(struct i2c_client *client,
> if (rc)
> chip->poll_retry_count = 0;
>
> + chip->force_load = of_property_read_bool(client->dev.of_node,
> + "sbs,force-load");
> +
> if (pdata) {
> chip->poll_retry_count = pdata->poll_retry_count;
> chip->i2c_retry_count = pdata->i2c_retry_count;
> @@ -890,7 +894,7 @@ static int sbs_probe(struct i2c_client *client,
> * Before we register, we might need to make sure we can actually talk
> * to the battery.
> */
> - if (!(force_load || chip->gpio_detect)) {
> + if (!(force_load || chip->gpio_detect || chip->force_load)) {
> rc = sbs_read_word_data(client, sbs_data[REG_STATUS].addr);
>
> if (rc < 0) {

\
 
 \ /
  Last update: 2019-07-30 05:09    [W:0.454 / U:0.232 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site