lkml.org 
[lkml]   [2019]   [Jul]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 3/3] iio: pressure: hp03: convert to i2c_new_dummy_device
On Mon, 22 Jul 2019 19:26:13 +0200
Wolfram Sang <wsa+renesas@sang-engineering.com> wrote:

> Move from i2c_new_dummy() to i2c_new_dummy_device(), so we now get an
> ERRPTR which we use in error handling.
>
> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>

Applied, thanks.

J
> ---
>
> Generated with coccinelle. Build tested by me and buildbot. Not tested on HW.
>
> drivers/iio/pressure/hp03.c | 6 +++---
> 1 file changed, 3 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/iio/pressure/hp03.c b/drivers/iio/pressure/hp03.c
> index f00102577fd5..026ba15ef68f 100644
> --- a/drivers/iio/pressure/hp03.c
> +++ b/drivers/iio/pressure/hp03.c
> @@ -243,10 +243,10 @@ static int hp03_probe(struct i2c_client *client,
> * which has it's dedicated I2C address and contains
> * the calibration constants for the sensor.
> */
> - priv->eeprom_client = i2c_new_dummy(client->adapter, HP03_EEPROM_ADDR);
> - if (!priv->eeprom_client) {
> + priv->eeprom_client = i2c_new_dummy_device(client->adapter, HP03_EEPROM_ADDR);
> + if (IS_ERR(priv->eeprom_client)) {
> dev_err(dev, "New EEPROM I2C device failed\n");
> - return -ENODEV;
> + return PTR_ERR(priv->eeprom_client);
> }
>
> priv->eeprom_regmap = regmap_init_i2c(priv->eeprom_client,

\
 
 \ /
  Last update: 2019-07-27 22:00    [W:0.068 / U:4.516 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site