lkml.org 
[lkml]   [2019]   [Jul]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH 00/15] thermal: qcom: tsens: Add interrupt support
(Resending from a desktop client because mobile gmail apparently sends
html that gets rejected by all lists)

On Fri, Jul 26, 2019 at 4:06 PM Brian Masney <masneyb@onstation.org> wrote:
>
> Hi Amit,
>
> On Fri, Jul 26, 2019 at 03:48:35AM +0530, Amit Kucheria wrote:
> > Add interrupt support to TSENS. The first 6 patches are general fixes and
> > cleanups to the driver before interrupt support is introduced.
> >
> > This series has been developed against qcs404 and sdm845 and then tested on
> > msm8916. Testing on msm8998 and msm8974 would be appreciated since I don't
> > have hardware handy. Further, I plan to test on msm8996 and also submit to
> > kernelci.
> >
> > I'm sending this out for more review to get help with testing.
>
> I can test this on msm8974 for you using a Nexus 5. Here's what I've
> done so far:

Thanks. I was hoping that would be the case given all your effort
getting Nexus 5 supported. :-)

> The device tree nodes appear in sysfs:
>
> / # ls -1 /sys/class/thermal/
> cooling_device0
> cooling_device1
> thermal_zone0
> thermal_zone1
> thermal_zone2
> thermal_zone3
> thermal_zone4
> thermal_zone5
> thermal_zone6
> thermal_zone7
> thermal_zone8
> thermal_zone9

Looks good. What are the contents of the files inside the two
cooling_device directories? The output of the following command would
be nice:

$ grep "" cooling_device?/*

> The various temperatures were in the upper 40s and I threw some work at
> all four CPU cores to warm up the phone and watched the various
> temperatures rise:
>
> / # for i in $(seq 0 9) ; do
> > TYPE=$(cat /sys/class/thermal/thermal_zone$i/type)
> > TEMP=$(cat /sys/class/thermal/thermal_zone$i/temp)
> > echo "$TYPE = $TEMP"
> > done
> cpu-thermal0 = 66000
> cpu-thermal1 = 66000
> cpu-thermal2 = 66000
> cpu-thermal3 = 66000
> q6-dsp-thermal = 60000
> modemtx-thermal = 57000
> video-thermal = 61000
> wlan-thermal = 65000
> gpu-thermal-top = 61000
> gpu-thermal-bottom = 59000
>
> To test the interrupt support, I lowered all of the temperature trips to
> 51C but I'm not sure where to read that notification. I assume one of
> the cooling devices or a governor should be started? Sorry but I haven't
> done any work in the thermal subsystem yet and I'm short on time this
> morning to investigate right now.

For now, just checking if the tsens interrupt in /proc/interrupts
fires should be fine. I have another patch to add some information to
debugs that I'll send at some point.

How well does cpufreq work on 8974? I haven't looked at it yet but
we'll need it for thermal throttling.

> Brian

\
 
 \ /
  Last update: 2019-07-26 13:11    [W:0.309 / U:0.140 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site