lkml.org 
[lkml]   [2019]   [Jul]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRE: [Regression] Commit "nvme/pci: Use host managed power state for suspend" has problems
Date
+Rajat

> -----Original Message-----
> From: Kai-Heng Feng <kai.heng.feng@canonical.com>
> Sent: Thursday, July 25, 2019 9:03 AM
> To: Rafael J. Wysocki
> Cc: Keith Busch; Christoph Hellwig; Sagi Grimberg; linux-
> nvme@lists.infradead.org; Limonciello, Mario; Linux PM; LKML
> Subject: Re: [Regression] Commit "nvme/pci: Use host managed power state for
> suspend" has problems
>
>
> [EXTERNAL EMAIL]
>
> Hi Rafael,
>
> at 17:51, Rafael J. Wysocki <rjw@rjwysocki.net> wrote:
>
> > Hi Keith,
> >
> > Unfortunately,
> >
> > commit d916b1be94b6dc8d293abed2451f3062f6af7551
> > Author: Keith Busch <keith.busch@intel.com>
> > Date: Thu May 23 09:27:35 2019 -0600
> >
> > nvme-pci: use host managed power state for suspend
> >
> > doesn't universally improve things. In fact, in some cases it makes
> > things worse.
> >
> > For example, on the Dell XPS13 9380 I have here it prevents the processor
> > package
> > from reaching idle states deeper than PC2 in suspend-to-idle (which, of
> > course, also
> > prevents the SoC from reaching any kind of S0ix).
> >
> > That can be readily explained too. Namely, with the commit above the
> > NVMe device
> > stays in D0 over suspend/resume, so the root port it is connected to also
> > has to stay in
> > D0 and that "blocks" package C-states deeper than PC2.
> >
> > In order for the root port to be able to go to D3, the device connected
> > to it also needs
> > to go into D3, so it looks like (at least on this particular machine, but
> > maybe in
> > general), both D3 and the NVMe-specific PM are needed.

Well this is really unfortunate to hear. I recall that with some disks we were
seeing problems where NVME specific PM wasn't working when the disk was in D3.

On your specific disk, it would be good to know if just removing the pci_save_state(pdev)
call helps.

If so, :
* that might be a better option to add as a parameter.
* maybe we should double check all the disks one more time with that tweak.

> >
> > I'm not sure what to do here, because evidently there are systems where
> > that commit
> > helps. I was thinking about adding a module option allowing the user to
> > override the
> > default behavior which in turn should be compatible with 5.2 and earlier
> > kernels.
>
> I just briefly tested s2i on XPS 9370, and the power meter shows a 0.8~0.9W
> power consumption so at least I don’t see the issue on XPS 9370.
>

To me that confirms NVME is down, but it still seems higher than I would have
expected. We should be more typically in the order of ~0.3W I think.

> Can you please provide the output of `nvme id-ctrl /dev/nvme*` and I’ll
> test the NVMe controller on XPS 9380.
>
> Kai-Heng
>
> >
\
 
 \ /
  Last update: 2019-07-25 18:24    [W:0.206 / U:0.216 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site