lkml.org 
[lkml]   [2019]   [Jul]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v4 1/5] devfreq: exynos-bus: correct clock enable sequence
Hi,

You are missing my Acked tag.

2019년 7월 25일 (목) 오후 11:44, <k.konieczny@partner.samsung.com>님이 작성:
>
> Regulators should be enabled before clocks to avoid h/w hang. This
> require change in exynos_bus_probe() to move exynos_bus_parse_of()
> after exynos_bus_parent_parse_of() and change in error handling.
> Similar change is needed in exynos_bus_exit() where clock should be
> disabled before regulators.
>
> Signed-off-by: Kamil Konieczny <k.konieczny@partner.samsung.com>
> ---
> Changes:
> v4:
> - move regulator disable after clock disable
> - remove unrelated changes
> - add disabling regulators in error path in exynos_bus_probe()
>
> ---
> drivers/devfreq/exynos-bus.c | 31 +++++++++++++++++--------------
> 1 file changed, 17 insertions(+), 14 deletions(-)
>
> diff --git a/drivers/devfreq/exynos-bus.c b/drivers/devfreq/exynos-bus.c
> index 486cc5b422f1..f34fa26f00d0 100644
> --- a/drivers/devfreq/exynos-bus.c
> +++ b/drivers/devfreq/exynos-bus.c
> @@ -194,11 +194,10 @@ static void exynos_bus_exit(struct device *dev)
> if (ret < 0)
> dev_warn(dev, "failed to disable the devfreq-event devices\n");
>
> - if (bus->regulator)
> - regulator_disable(bus->regulator);
> -
> dev_pm_opp_of_remove_table(dev);
> clk_disable_unprepare(bus->clk);
> + if (bus->regulator)
> + regulator_disable(bus->regulator);
> }
>
> /*
> @@ -386,6 +385,7 @@ static int exynos_bus_probe(struct platform_device *pdev)
> struct exynos_bus *bus;
> int ret, max_state;
> unsigned long min_freq, max_freq;
> + bool passive = false;
>
> if (!np) {
> dev_err(dev, "failed to find devicetree node\n");
> @@ -399,27 +399,27 @@ static int exynos_bus_probe(struct platform_device *pdev)
> bus->dev = &pdev->dev;
> platform_set_drvdata(pdev, bus);
>
> - /* Parse the device-tree to get the resource information */
> - ret = exynos_bus_parse_of(np, bus);
> - if (ret < 0)
> - return ret;
> -
> profile = devm_kzalloc(dev, sizeof(*profile), GFP_KERNEL);
> - if (!profile) {
> - ret = -ENOMEM;
> - goto err;
> - }
> + if (!profile)
> + return -ENOMEM;
>
> node = of_parse_phandle(dev->of_node, "devfreq", 0);
> if (node) {
> of_node_put(node);
> - goto passive;
> + passive = true;
> } else {
> ret = exynos_bus_parent_parse_of(np, bus);
> + if (ret < 0)
> + return ret;
> }
>
> + /* Parse the device-tree to get the resource information */
> + ret = exynos_bus_parse_of(np, bus);
> if (ret < 0)
> - goto err;
> + goto err_reg;
> +
> + if (passive)
> + goto passive;
>
> /* Initialize the struct profile and governor data for parent device */
> profile->polling_ms = 50;
> @@ -510,6 +510,9 @@ static int exynos_bus_probe(struct platform_device *pdev)
> err:
> dev_pm_opp_of_remove_table(dev);
> clk_disable_unprepare(bus->clk);
> +err_reg:
> + if (!passive)
> + regulator_disable(bus->regulator);
>
> return ret;
> }
> --
> 2.22.0
>


--
Best Regards,
Chanwoo Choi

\
 
 \ /
  Last update: 2019-07-25 17:00    [W:0.082 / U:0.020 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site