lkml.org 
[lkml]   [2019]   [Jul]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [alsa-devel] [PATCH 08/10] ASoC: dt-bindings: Document fcomb_mode property
On Thu, Jul 25, 2019 at 2:22 AM Nicolin Chen <nicoleotsuka@gmail.com> wrote:
>
> On Mon, Jul 22, 2019 at 03:48:31PM +0300, Daniel Baluta wrote:
> > This allows combining multiple-data-line FIFOs into a
> > single-data-line FIFO.
> >
> > Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
> > ---
> > Documentation/devicetree/bindings/sound/fsl-sai.txt | 4 ++++
>
> This should be sent to devicetree mail-list also.
>
> > 1 file changed, 4 insertions(+)
> >
> > diff --git a/Documentation/devicetree/bindings/sound/fsl-sai.txt b/Documentation/devicetree/bindings/sound/fsl-sai.txt
> > index 59f4d965a5fb..ca27afd840ba 100644
> > --- a/Documentation/devicetree/bindings/sound/fsl-sai.txt
> > +++ b/Documentation/devicetree/bindings/sound/fsl-sai.txt
> > @@ -54,6 +54,10 @@ Optional properties:
> > represents first data line, bit 1 represents second
> > data line and so on. Data line is enabled if
> > corresponding bit is set to 1.
> > + - fsl,fcomb_mode : list of two integers (first for RX, second for TX)
> > + representing FIFO combine mode. Possible values for
> > + combined mode are: 0 - disabled, 1 - Rx/Tx from shift
> > + registers, 2 - Rx/Tx by software, 3 - both.
>
> Looks like a software configuration to me, instead of a device
> property. Is this configurable by user case, or hard-coded by
> SoC/hardware design?

Indeed this is a software configuration and configurable by user case.
Will think of a another way to specify it.

\
 
 \ /
  Last update: 2019-07-25 08:03    [W:0.064 / U:0.128 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site