lkml.org 
[lkml]   [2019]   [Jul]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v4 3/5] drivers: devfreq: events: extend events by type of counted data
From
Date
Hi Lukasz,

On 19. 7. 24. 오후 7:15, Lukasz Luba wrote:
> Hi Chanwoo,
>
> Could you have a look a this patch, please?
> This patch has been rewritten accorifing to your suggestion.
> Krzysztof tried to apply 5/5 DT patch on his current branch,
> but it is missing earlier stuff.
> The other patches have needed ACKs so could go through devfreq tree
> probably, but this one left.

Sorry for the late reply. It looks good to me.

Acked-by: Chanwoo Choi <cw00.choi@samsung.com>

>
> Regards,
> Lukasz
>
> On 6/5/19 11:12 AM, Lukasz Luba wrote:
>> This patch adds posibility to choose what type of data should be counted
>> by the PPMU counter. Now the type comes from DT where the event has been
>> defined. When there is no 'event-data-type' the default value is used,
>> which is 'read+write data in bytes'.
>> It is needed when you want to know not only read+write data bytes but
>> i.e. only write data in byte, or number of read requests, etc.
>>
>> Signed-off-by: Lukasz Luba <l.luba@partner.samsung.com>
>> ---
>> drivers/devfreq/event/exynos-ppmu.c | 60 ++++++++++++++++++++---------
>> include/linux/devfreq-event.h | 6 +++
>> 2 files changed, 47 insertions(+), 19 deletions(-)
>>
>> diff --git a/drivers/devfreq/event/exynos-ppmu.c b/drivers/devfreq/event/exynos-ppmu.c
>> index 17f3c86a6f00..12f637320e9e 100644
>> --- a/drivers/devfreq/event/exynos-ppmu.c
>> +++ b/drivers/devfreq/event/exynos-ppmu.c
>> @@ -161,9 +161,9 @@ static int exynos_ppmu_set_event(struct devfreq_event_dev *edev)
>> if (ret < 0)
>> return ret;
>>
>> - /* Set the event of Read/Write data count */
>> + /* Set the event of proper data type monitoring */
>> ret = regmap_write(info->regmap, PPMU_BEVTxSEL(id),
>> - PPMU_RO_DATA_CNT | PPMU_WO_DATA_CNT);
>> + edev->desc->data_type);
>> if (ret < 0)
>> return ret;
>>
>> @@ -375,23 +375,11 @@ static int exynos_ppmu_v2_set_event(struct devfreq_event_dev *edev)
>> if (ret < 0)
>> return ret;
>>
>> - /* Set the event of Read/Write data count */
>> - switch (id) {
>> - case PPMU_PMNCNT0:
>> - case PPMU_PMNCNT1:
>> - case PPMU_PMNCNT2:
>> - ret = regmap_write(info->regmap, PPMU_V2_CH_EVx_TYPE(id),
>> - PPMU_V2_RO_DATA_CNT | PPMU_V2_WO_DATA_CNT);
>> - if (ret < 0)
>> - return ret;
>> - break;
>> - case PPMU_PMNCNT3:
>> - ret = regmap_write(info->regmap, PPMU_V2_CH_EVx_TYPE(id),
>> - PPMU_V2_EVT3_RW_DATA_CNT);
>> - if (ret < 0)
>> - return ret;
>> - break;
>> - }
>> + /* Set the event of proper data type monitoring */
>> + ret = regmap_write(info->regmap, PPMU_V2_CH_EVx_TYPE(id),
>> + edev->desc->data_type);
>> + if (ret < 0)
>> + return ret;
>>
>> /* Reset cycle counter/performance counter and enable PPMU */
>> ret = regmap_read(info->regmap, PPMU_V2_PMNC, &pmnc);
>> @@ -507,6 +495,7 @@ static int of_get_devfreq_events(struct device_node *np,
>> struct device_node *events_np, *node;
>> int i, j, count;
>> const struct of_device_id *of_id;
>> + int ret;
>>
>> events_np = of_get_child_by_name(np, "events");
>> if (!events_np) {
>> @@ -556,6 +545,39 @@ static int of_get_devfreq_events(struct device_node *np,
>> desc[j].driver_data = info;
>>
>> of_property_read_string(node, "event-name", &desc[j].name);
>> + ret = of_property_read_u32(node, "event-data-type",
>> + &desc[j].data_type);
>> + if (ret) {
>> + /* Set the event of proper data type counting.
>> + * Check if the data type has been defined in DT,
>> + * use default if not.
>> + */
>> + if (info->ppmu_type == EXYNOS_TYPE_PPMU_V2) {
>> + struct devfreq_event_dev edev;
>> + int id;
>> + /* Not all registers take the same value for
>> + * read+write data count.
>> + */
>> + edev.desc = &desc[j];
>> + id = exynos_ppmu_find_ppmu_id(&edev);
>> +
>> + switch (id) {
>> + case PPMU_PMNCNT0:
>> + case PPMU_PMNCNT1:
>> + case PPMU_PMNCNT2:
>> + desc[j].data_type = PPMU_V2_RO_DATA_CNT
>> + | PPMU_V2_WO_DATA_CNT;
>> + break;
>> + case PPMU_PMNCNT3:
>> + desc[j].data_type =
>> + PPMU_V2_EVT3_RW_DATA_CNT;
>> + break;
>> + }
>> + } else {
>> + desc[j].data_type = PPMU_RO_DATA_CNT |
>> + PPMU_WO_DATA_CNT;
>> + }
>> + }
>>
>> j++;
>> }
>> diff --git a/include/linux/devfreq-event.h b/include/linux/devfreq-event.h
>> index 4db00b02ca3f..cc160b1274c0 100644
>> --- a/include/linux/devfreq-event.h
>> +++ b/include/linux/devfreq-event.h
>> @@ -81,14 +81,20 @@ struct devfreq_event_ops {
>> * struct devfreq_event_desc - the descriptor of devfreq-event device
>> *
>> * @name : the name of devfreq-event device.
>> + * @data_type : the data type which is going to be counted in the register.
>> * @driver_data : the private data for devfreq-event driver.
>> * @ops : the operation to control devfreq-event device.
>> *
>> * Each devfreq-event device is described with a this structure.
>> * This structure contains the various data for devfreq-event device.
>> + * The data_type describes what is going to be counted in the register.
>> + * It might choose to count e.g. read requests, write data in bytes, etc.
>> + * The full supported list of types is present in specyfic header in:
>> + * include/dt-bindings/pmu/.
>> */
>> struct devfreq_event_desc {
>> const char *name;
>> + u32 data_type;
>> void *driver_data;
>>
>> const struct devfreq_event_ops *ops;
>>
>
>


--
Best Regards,
Chanwoo Choi
Samsung Electronics

\
 
 \ /
  Last update: 2019-07-24 12:23    [W:0.122 / U:0.460 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site